Binuclear rhodium(II) complexes with leucine and proline

The dimeric rhodium(II) complexes [Rh₂(leu)₄(H₂O)₂]- (ClO₄)₄ and [Rh₂(pro)₄(H₂O)₂](ClO₄)₄ have been prepared and characterized by elemental analyses, i.r., u.v.–vis. and ¹H-n.m.r. spectroscopy. The amino acid molecules are coordinated as bridging ligands via their carboxylato groups. Cyclic voltammetry in DMF has shown that the complexes undergo a quasi-reversible reduction to yield dimers containing a Rh ₂ ³⁺ core. Oxidation processes within the 0–1.5V range were not observed.     

Preparation and characterization of electrodeposited Ni-Ru alloys: morphological and catalytic study

Nickel-ruthenium alloys with various compositions have been deposited by electrodeposition for the first time. Cyclic voltammetry and linear stripping voltammetry measurements show that codeposition of nickel with ruthenium is possible below the potential value of nickel reduction. High-quality alloys containing nickel and ruthenium can be plated at cathodic potentials ranging from − 0.5 to − 1.0 V vs SCE. Deposited coatings were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The diffractograms obtained show that an increase of nickel concentration in alloy will lead to a change in the phase composition and formation of NiRu (100) and (101) phases which is observed to be 78 mas.% Ni. SEM studies confirm the surface homogeneity and presence of small, regular grains. AFM observation allows the estimation of the real surface area of obtained alloys which increase with more negative electrodeposition potentials. Ni-Ru alloys were found to be highly electroactive in the water splitting process, which can be connected with the presence of the NiRu phase and a well-developed electroactive area.

Electrochemical deposition of Ni-Ru alloys with various composition and their catalytic activity in water splitting process

     

A study of the relative reactivity of maleic anhydride and some maleimides in free radical copolymerization and terpolymerization

Composition data for the free radical copolymerization of maleic anhydride with N-phenylmaleimide in toluene at 60°C have been obtained. Relative reactivity ratios in terminal and penultimate models using nonlinear least-squares optimization routine have been determined. The standard error was found to be somewhat smaller in the penultimate model, but is still larger than the uncertainty estimated for the copolymer composition. Terpolymers of maleic anhydride and styrene with maleimide, N-butylmaleimide, N-phenylmaleimide, and N-carbamylmaleimide were obtained. On the basis of analysis of the product composition at various monomer feeds the relative reactivity of maleic anhydride and maleimides in these reactions is compared and the influence of the structure of thesemonomers on the rate of some chain growth reactions is discussed.     

Addition of elemental selenium to phosphonate carbanions- - a key step in the synthesis of vinylphosphonates. A new synthetic approach to 1,4-dicarbonyl systems.

A convenient synthesis of vinylphosphonates which involves addition of elemental selenium to phosphonate carbanions followed by alkylation and selenoxide elimination is described. A general approach to 1,4-dicarbonyl systems based on diethyl α-methylthiovinylphosphonate is also reported.     

Semiautomatic and automatic catalytic amperometric and catalytic constant-current potentiometric titrations of gold(III)

Semiautomatic and automatic amperometry and constant-current potentiometry were used to follow the course of catalytic titration of gold(III) with potassium iodide. The Ce(IV)-As(III) system in the presence of sulfuric acid was used as the indicator reaction. The possibilities of the application of two types of graphite electrodes were investigated. The effect of concentration of the indicator reaction components, and the presence of organic solvents and acids on the shape of the catalytic titration curves was studied. Amounts of 80–900 μg of gold(III) were determined with a relative standard deviation less than 1.1%. The results obtained are in good agreement with those of comparable methods.     

Pressurised solvent extraction for organotin speciation in vegetable matrices

Because organotin compounds (OTC) are widely used in many fields of activity, they have become an ubiquitous environmental presence. The presence of organotins in the environment impacts upon food safety, making it important to monitor the levels of organotin pesticides in fruits and vegetables. Nevertheless, only a few studies have been published on organotin speciation in plants. The objective of the present study was to evaluate and optimise a specific procedure based on pressurised solvent extraction (PSE) that is suitable for monitoring organotin content in vegetables. In ASE, solvents are used at elevated temperatures and pressures to increase the rate and efficiency of the extraction process. The results from this procedure were compared to those from the technique usually employed, solid/liquid extraction (SLE) performed in an acidic solvent by mechanical shaking. Three extracting solutions were tested—methanol, ethyl acetate and a mixture of methanol and ethyl acetate—and the mixture was found to give the most quantitative results while preserving the speciation. French bean and lettuce leaves as well as potato tubers were used as the plant materials. These vegetables were considered because they are the vegatables consumed in the most quantities in Europe. The study focuses on trisubstituted OTCs, which are the most toxic tin species. The samples were spiked with four trisubstituted organotins: tributyltin (TBT), triphenyltin (TPhT), tricyclohexyltin (TcHexT) and trioctyltin (TOcT). The influence of the pressure and the temperature of the PSE on the quantitativity of the process and on species preservation was evaluated using the experimental design methodology. The optimised PSE allowed detection limits down to 1–2 ng (Sn) g^–1 to be reached. These are higher than those obtained by SLE (0.1–1 ng (Sn) g^–1). Although the repeatability is similar for both PSE and SLE (2–12% for triorganotin compounds), this appears to be highly time-dependent in the case of SLE. Comparison with SLE confirms that PSE is an interesting tool for vegetable analysis considering the satisfactory OTC preservation and repeatability obtained for a relatively short extraction duration (only 15 min against 2–12 h for SLE).     

Thermal properties of solid nickel(II) coordination compounds

The paper deals with the chemical and physical factors influencing the stoichiometry of thermal decomposition of solid coordination compounds. Nickel(II) coordination compounds were used as examples: the problem of the relationship between the structure of the initial compound (and of its intermediates) and the stoichiometry of thermal decomposition is discussed; experimental conditions are shown to affect this decomposition, and the conceptions of the apparent and real stoichiometries of thermal decomposition are discussed. The results obtained may have a more general meaning.

---

Zusammenfassung Der Beitrag befa\t sich mit den chemischen und physikalischen Faktoren, welche die Stöchiometrie der thermischen Zersetzung fester Koordinationsverbindungen beeinflussen. Koordinationsverbindungen von Nickel(II) wurden als Beispiel eingesetzt; das Problem des Zusammenhanges zwischen Struktur der Ausgangsverbindung (und seiner IntermediÄrprodukte) und der Stöchiometrie der thermischen Zersetzung wird erörtert; die die Zersetzung beeinflussenden Versuchsbedingungen werden gezeigt und das Konzept der sogenannten scheinbaren und tatsÄchlichen Stöchiometrie der thermischen Zersetzung wird beschrieben. Die erhaltenen Ergebnisse dürften von allgemeinerer Bedeutung sein.

---

Résumé L'article considère les facteurs chimiques et physiques qui influencent la stchiométrie des réactions de décomposition thermique des composés de coordination solides. Les composés de coordination du nickel(II) ont été choisis pour illustrer le problème des relations entre la structure du composé initial (et de ses intermédiaires) et la stchiométrie de la réaction de décomposition thermique. On montre que les conditions expérimentales influencent la décomposition et on discute le principe des réactions stchiométriques de décomposition thermique dites «apparentes» et «réelles». Les résultats obtenus sont probablement de portée plus générale.

---

, . $ (II) $ ( ) $ . , $ , $ . .

---

---

Reported at the 7th Seminar on Modern Methods in Inorganic Chemistry. Harmonia-Bratislava, 1977.     

Estimation of the lipophilicity of antiarrhythmic and antihypertensive active 1-substituted pyrrolidin-2-one and pyrrolidine derivatives

The lipophilicity of some antiarrhythmic and antihypertensive active 1-[2-hydroxy- or 1-[2-acetoxy-3-(4-aryl-1-piperazinyl)propyl]pyrrolidin-2-one derivatives (1-12) has been investigated. Their lipophilicity (R(MO) and log k') was determined by reversed-phase thin-layer chromatography and reversed-phase high-performance liquid chromatography with mixtures of acetonitrile and Tris buffer as mobile phases. The partition coefficients of compounds 1-12 (log P(ScilogP)) were also calculated with the ScilogP program. Comparison of R(MO), log k' and calculated log D(7.0 ScilogP) values enabled calculation of clog D(7.0 TLC) and clog D(7.0 HPLC) values. Preliminary quantitative structure-activity relationship studies indicated that for active compounds there is a dependence between affinity for alpha(2)-adrenoceptors and their clog D(7.0 HPLC) values.     

Dynamic Light Scattering and NMR Studies of Napin

We analyze the structure of napin (BngNAP1), a storage protein (m.w. 14.5 kDa) from Brassica napus. On the basis of the results of ¹H NMR spectroscopy and dynamic light scattering (DLS) studies, the overall shape and secondary structure of the molecule are estimated.     

Determination of aluminium and chromium in serum by atomic absorption spectrometry

Summary The optimal conditions for the determination of aluminium and chromium in blood serum are proposed. Several sample pretreatment procedures for the purpose are compared. The best results are obtained by sample dilution with nitric acid (0.1 mol/l) and addition of Mg(NO₃)₂ as modifier with a magnesium concentration of 0.2 mg/ml. This procedure has been used for studying the intestinal intake of aluminium by patients after oral administration of aluminium compounds.