紫外光照处理对TiO2膜光伏性能的影响

近年来人们利用纳米晶TiO2电极取代普通的TiO2电极[1],使其太阳能电池的光电转换效率得到很大提高.纳米晶TiO2电极具有大量表面态,在化学上表现为Ti3+或Ti—OH,对于光生电荷的分离过程和迁移过程有重要影响.这些表面化学结构的变化可能会导致TiO2的光伏性能的变化.1997年Fujishima等[2]用紫外光照射TiO2膜使它具有超亲水的性质,结构分析表明,超亲水的原因在于光照使TiO2膜的表面形成Ti—OH[3].因此,在光照处理的同时可能会导致TiO2的光伏性的变化.本文对紫外光照处理TiO2膜的光伏性能进行了研究,并结合光诱导TiO2的亲水性变化对光伏性能变化的原因进行了讨论.     

磁性壳聚糖微球的制备及其用作漆酶固定化载体

磁性壳聚糖微球的制备及其用作漆酶固定化载体;壳聚糖;固定化;漆酶;酶活力     

La2O3对氧化铝透明陶瓷显微结构和透光性能的影响

采用传统无压烧结工艺在氢气氛下制备Al2O3透明陶瓷。实验结果表明：MgO和La2O3复合添加时，随着La2O3掺杂量的增加体积密度总体上保持上升的趋势。随着保温时间的延长，陶瓷的致密化程度增大，残余气孔逐步排出，晶粒进一步长大。采用La2O3和MgO复合添加比单独掺入MgO陶瓷样品透过率更高，掺杂效果更好。在烧结温度为1750℃，保温时问为1h条件下，在波艮为300～800nm测试范围内，陶瓷样品的全透过率大于82％，最大值为86％。     

柱前衍生化高效液相色谱荧光检测法测定桑叶中的1-脱氧野尻霉素

建立了芴甲氧酰氯(FMOC—Cl)柱前荧光衍生一高效液相色谱法测定桑叶中1-脱氧野尻霉素(DNJ)的方法。桑叶经0．05mol／L,盐酸提取,在pH8．5的硼酸盐缓冲溶液条件下,DNJ反应生成荧光产物,然后用高效液相色谱-荧光检测器测定。流动相为乙腈-0．1％醋酸(55：45,V/V)。线性范围为0．567～34mg／L(相关系数r=0．9999);检出限为0．03mg／L。实验测得桑叶中DNJ含量为0．24％;平均回收率为97．1％,RSD为1．35％(n=6)。     

中学生营养平衡米膳食最佳模式评价

根据中国营养学会推荐的热量标准,研制了中学生营养平衡米膳食最佳模式。按该模式,中学生每日应摄入的膳食品种及其数量如下:主食:营养平衡米,初中男生510~597g,女生468~510g;高中男生618~683g,女生532~575g;副食相同:青菜或水果500g或600g,鱼或肉100g或50g,蛋类40g,大豆制品30g,花生油12.5g,盐6g。调查结果表明,蛋白质、脂肪、碳水化合物,热量摄入量全部达标准要求。Q(蛋白质)∶Q(脂肪)∶Q(碳水化合物):高中男女生为16∶20∶64,初中男、女生分别为17∶20∶63。提示中学生营养平衡米膳食最佳模式使中学生达到营养平衡,建议推广食用。     

大豆中二硝基苯胺类除草剂多残留的气相色谱法定量检测及质谱确证

建立以凝胶渗透色谱法（GPC）和固相萃取法（SPE）及气相色谱法（GC）联用技术测定大豆中10种二硝基苯胺类除草剂（氟乐灵、乙氟灵、环丙氟、氯乙氟灵、仲丁灵、异乐灵、二甲戊乐灵、二硝胺、氨基丙氟灵和磺乐灵）多残留检测方法。目标农药经正己烷饱和的乙腈提取，凝胶渗透色谱除去大豆中大部分油脂及色素，再经Florisil柱净化和富集，依次用6mL二氯甲烷和6mL二氯甲烷＋丙酮（99＋1）洗脱。目标农药采用电子捕获检测（GC／ECD），外标法定量，并经质谱（MS）确证。两个添加水平重复6次，回收率分别为74％～105％和59％～105％；相对标准偏差〈20％；检出限为1．8～7．6μg／kg；定量限为6～38μg/kg。     

ATR-FTIR investigation on the complexation of myo-inositol hexaphosphate with aluminum hydroxide

The adsorption isotherm of and the pH effect on the adsorption of myo-inositol hexaphosphate (myo-IP6) on amorphous aluminum hydroxide was investigated. It was found that the adsorption isotherm of myo-IP6 on aluminum hydroxide could be well fitted with the Freundlich isotherm. The amount of myo-IP6 adsorbed remained almost constant in the range of pH 4.0 to 7.0, but it decreased considerably as the initial pH was over 7. The adsorption of myo-IP6 resulted in an increase in the pH level due to the release of OH(-) ions, which suggested that the adsorption of myo-IP6 on aluminum hydroxide was caused by a ligand exchange reaction. ATR-FTIR analysis of myo-IP6 in solution and adsorbed on aluminum hydroxide at different pH were performed. The ATR-FTIR investigation indicated that myo-IP6 was adsorbed onto aluminum hydroxide by forming inner-sphere complexes and adsorption facilitated the deprotonation of phosphate groups. The asymmetric vibration of the PO bond in AlPO(-)(3) appearing at a lower frequency than that in the terminal HPO(-)(3) indicated that Al bound to the O atom not as strongly as the H atom did. The ATR-FTIR investigation and theoretical calculation (with the Gaussian 03 program) revealed that three of the six phosphate groups in myo-IP6 molecules were bound to aluminum hydroxide while the other three remained free when myo-IP6 was adsorbed on aluminum hydroxide.     

Quantitation of seven polyoxypregnane glycosides in Marsdenia tenacissima using reversed-phase high-performance liquid chromatography-evaporative light-scattering detection

A high-performance liquid chromatography coupled with an evaporative light scattering detector (HPLC-ELSD) has been developed for the simultaneous determination of seven polyoxypregnane glycosides, tenacissosides A, B, G, H, I and marsdenosides C, G, in the stem of Marsdenia tenacissima, a Chinese herbal medicine. With a C18 analytical column, the analytes were separated efficiently using methanol-water as the mobile phase in a gradient program. The method limits of detection ranged from ca. 0.3 microg for marsdenoside C to ca. 0.5 microg for marsdenoside G and the method limits of quantitation from 1.0 microg for marsdenoside C to 1.7 microg for marsdenoside G, respectively. The intra- and inter-day precisions of the method were evaluated and all were less than 4%. All the recoveries for the spiked analytes exceeded 90%. This method was successfully used to analyze 19 samples of the stem of M. tenacissima.     

甲烷氧化偶联W-Mn/SiO2催化剂上O2-脉冲频率效应(PFE)的研究

采用频率脉冲反应方法,以Mn-Na2WO4/S iO2催化剂上甲烷氧化偶联为探针反应,通过实时、原位的四极质谱检测手段,研究氧物种对甲烷C-H键选择性活化的微观历程.首次发现了Mn-Na2WO4/S iO2催化剂上O2-脉冲频率效应,即脉冲反应产物量随氧脉冲注入频率的增加而增加.研究结果表明,在反应条件下,Mn-Na2WO4/S iO2催化剂上有两种活化甲烷的氧物种同时存在,它们活化甲烷的方式不同。     

热历史对聚醚醚酮及其碳纤维复合材料——Ⅱ.熔融行为的影响

本文利用差示扫描量热仪(DSC)研究了聚醚醚酮(PEEK)和以PEEK为基体的碳纤维复合材料(APC-2)的热历史对它们熔融行为的影响。在200—315℃结晶并退火热处理后,试样的DSC曲线上出现了两个吸热峰。低温吸热峰(峰温T′_m)较小,并与结晶和退火温度(T_c)有关;高温吸热峰(峰温T_m)较大,几乎不受T_n的影响。T′_m的出现与在不同T_c下生成的不完整晶体的熔融和重结晶过程有关,而T_m的出现则与完整晶体的熔融过程有关。实验结果表明,T′_m与T_c之间呈线性关系。按文献报道的方法,将T′_m与T_c的直线外推至与T′_m=T_c直线相交,其交点温度即为平衡熔点.结果表明,PEEK和APC-2试样的“平衡熔点”受不同热历史条件下生成晶体的完整程度的影响。当结晶并退火时间越长,求出的“平衡熔点”值越低,并与理论值接近。实验结果还表明,碳纤维表面具有促进PEEK树脂基体晶体完整化的作用,因而导致APC-2试样中PEEK树脂基体的熔点高于纯PEEK树脂。