Three-Dimensional Lattice Boltzmann Simulations of Single-Phase Permeability in Random Fractal Porous Media with Rough Pore–Solid Interface

Single-phase permeability k has intensively been investigated over the past several decades by means of experiments, theories and simulations. Although the effect of surface roughness on fluid flow and permeability in single pores and fractures as well as networks of fractures was studied previously, its influence on permeability in a random mass fractal porous medium constructed of pores of different sizes remained as an open question. In this study, we, therefore, address the effect of pore–solid interface roughness on single-phase flow in random fractal porous media. For this purpose, we apply a mass fractal model to construct porous media with a priori known mass fractal dimensions \(2.579 \le D_{\mathrm{m}} \le 2.893\) characterizing both solid matrix and pore space. The pore–solid interface of the media is accordingly roughened using the Weierstrass–Mandelbrot approach and two parameters, i.e., surface fractal dimension \(D_{\mathrm{s}}\) and root-mean-square (rms) roughness height. A single-relaxation-time lattice Boltzmann method is applied to simulate single-phase permeability in the corresponding porous media. Results indicate that permeability decreases sharply with increasing \(D_{\mathrm{s}}\) from 1 to 1.1 regardless of \(D_{\mathrm{m}}\) value, while k may slightly increase or decrease, depending on \(D_{\mathrm{m}}\), as \(D_{\mathrm{s}}\) increases from 1.1 to 1.6.     

Multi-objective optimization of a plate and frame heat exchanger via genetic algorithm

In the present paper, a plate and frame heat exchanger is considered. Multi-objective optimization using genetic algorithm is developed in order to obtain a set of geometric design parameters, which lead to minimum pressure drop and the maximum overall heat transfer coefficient. Vividly, considered objective functions are conflicting and no single solution can satisfy both objectives simultaneously. Multi-objective optimization procedure yields a set of optimal solutions, called Pareto front, each of which is a trade-off between objectives and can be selected by the user, regarding the application and the project’s limits. The presented work takes care of numerous geometric parameters in the presence of logical constraints. A sensitivity analysis is also carried out to study the effects of different geometric parameters on the considered objective functions. Modeling the system and implementing the multi-objective optimization via genetic algorithm has been performed by MATLAB.     

Aeroelastic analysis of a rotating wind turbine blade using a geometrically exact formulation

In this paper, an aeroelastic analysis of a rotating wind turbine blade is performed by considering the effects of geometrical nonlinearities associated with large deflection of the blade produced during wind turbine operation. This source of nonlinearity has become more important in the dynamic analysis of flexible blades used in more recent multi-megawatt wind turbines. The structural modeling, involving the coupled edgewise, flapwise and torsional DOFs, has been performed by using a nonlinear geometrically exact beam formulation. The aerodynamic model is presented based on the strip theory, by applying the principles of quasi-steady and unsteady airfoil aerodynamics. Compared to the conventional steady aerodynamic model, the presented model offers a more realistic consideration of fluid–structure interactions. The resulting governing equation, expanded up to the third-order terms, is analyzed by using the reduced-order model (ROM). The ROM is developed by employing the coupled mode shapes of a cantilever blade under free loading condition. The specifications of the 5MW-NREL wind turbine are used in the simulation study. After verifying the ROM results by comparing them with those of the full FEM model, the model is used in additional static, modal and transient dynamics analyses. The results indicate the important effect of geometrical nonlinearity, especially for larger structural deformations. Moreover, nonlinear analyses reveal the important effects of torsion induced by lateral deformations. It is also found that the governing equation is more efficient, and sufficiently accurate, when it is developed by using the second-order kinetic terms, third-order potential terms and the second-order aerodynamic terms together with third-order damping. Finally, the effects of nonlinearities on the flutter characteristics of wind turbine blades are evaluated through frequency and dynamic analyses.     

Asymptotic Behavior of Quasi-Autonomous Expansive Type Evolution Systems in a Hilbert Space

We introduce the notion of almost expansive sequences and curves and study their ergodic and asymptotic properties in a Hilbert space H. We apply our results to study the asymptotic behavior of solutions to the quasi-autonomous expansive type evolution system (du/dt)(t) + f(t) ∈ Au(t) on [0, ∞).     

From micelle supramolecular assemblies in selective solvents to isoporous membranes

The supramolecular assembly of PS-b-P4VP copolymer micelles induced by selective solvent mixtures was used to manufacture isoporous membranes. Micelle order in solution was confirmed by cryo-scanning electron microscopy in casting solutions, leading to ordered pore morphology. When dioxane, a solvent that interacts poorly with the micelle corona, was added to the solution, polymer-polymer segment contact was preferential, increasing the intermicelle contact. Immersion in water gave rise to asymmetric porous membranes with exceptional pore uniformity and high porosity. The introduction of a small number of carbon nanotubes to the casting solution improved the membrane stability and the reversibility of the gate response in the presence of different pH values.     

Electrical wiring of Pseudomonas putida and Pseudomonas fluorescens with osmium redox polymers

Two different flexible osmium redox polymers; poly(1-vinylimidazole)12-[Os-(4,4'-dimethyl-2,2'-di'pyridyl)2Cl2](2+/+) (osmium redox polymer I) and poly(vinylpyridine)-[Os-(N,N'-methylated-2,2'-biimidazole)3](2+/3+) (osmium redox polymer II) were investigated for their ability to efficiently "wire" Pseudomonas putida ATCC 126633 and Pseudomonas fluorescens (P. putida DSM 6521), which are well-known phenol degrading organisms, when entrapped onto cysteamine modified gold electrodes. The two Os-polymers differ in redox potential and the length of the side chains, where the Os(2+/3+)-functionalities are located. The bacterial cells were adapted to grow in the presence of phenol as the sole source of organic carbon. The performance of the redox polymers as mediators was investigated for making microbial sensors. The analytical characteristics of the microbial sensors were evaluated for determination of catechol, phenol and glucose as substrates in both batch analysis and flow analysis mode.     

A simple and high sensitive spectrophotometric method for ultra trace determination of ruthenium with its catalytic effect on the oxidation of pyronin B by periodate

A new simple, selective, high sensitive and rapid method has been developed for spectrophotometric determination of ultra trace amounts of ruthenium based on its catalytic effect on the oxidation of pyronin B by periodate at lambdamax=555 nm. The described method is able to quantify ruthenium in the range of 0.1-100 ng ml-1 (r=0.9973), with a detection limit (S/N=3) of 0.036 ng ml-1. Under optimum conditions, this procedure has been successfully applied to determine the trace levels of ruthenium in the environmental and biological samples. The precision, expressed as relative standard deviation of three measurements, is better than 2.44%.     

Development of Flow Injection Spectrofluorimetric Detection System for the Determination of Homocysteine

In this work, a new simple and sensitive flow injection method is developed for the determination of homocysteine with spectrofluorimetric detection technique. This method is based on the oxidation of homocysteine with Tl (III) in acidic media, producing fluorescence reagent, TlCl₃^2- (λ_ex = 237 nm, λ_em = 419 nm). The effects of chemical parameters (including pH of the solutions, the buffer, Tl (III) and potassium chloride concentrations), instrumental parameters (such as flow rate of the solutions, reaction coil length, and sample loop volume) and temperature on the fluorescence intensity as an analytical signal are studied and optimized. In the optimum conditions of the above variables, homocysteine can be determined in the range 4.0 × 10^-7–40.0 × 10^-6 M with the LDR from 4.0 × 10^-7 to 25.0 × 10^-6 M. The detection limit (with S/N = 3) is 6.0 × 10^-8 M of homocysteine and precision for the injection of 5.0, 10.0 and 15.0 μM of homocysteine are 0.8%, 1.5% and 2.5% (n = 10) respectively. The rate of analysis is 90 samples per hour. The influence of potential interfering substances, including amino acids and carbohydrates is also studied. The proposed method has been successfully used for the determination of homocysteine in the real sample (blood serum and tap water) matrix.     

Palladium metal nanoparticle size control through ion paired structures of [PdCl(4)](2-) with protonated PDMAEMA

The mean diameter of palladium metal particles produced by citrate reduction of the (H(+))(n) PDMAEMA/[PdCl(4)](2-) aqueous system increases from 1.4 nm to 5.0 nm as the pH decreases from 6.3 to 3.3 and the (H(+))(n) PDMAEMA/[PdCl(4)](2-) species undergo conversion from a cross linked polymer network to a single chain structure.     

Simultaneous spectrophotometric determination of nitrite and nitrate by flow injection analysis.

A new catalytic spectrophotometric method is reported for the simultaneous determination of nitrite and nitrate by flow injection analysis, based on the catalytic effect of nitrite on the redox reaction between pyrogallolsulfonephthalein and potassium bromate in acidic media. Nitrate can also be on-line reduced to nitrite with a modified copper-coated cadmium reduction column. The reaction was monitored spectrophotometrically by measuring the decrease in the absorbance of pyrogallolsulfonephthalein at 465 nm. Various analytical parameters such as effects of acidity, reagent concentrations, flow rates, sample sizes, lengths of the reaction coil and temperatures were studied and were optimized. Under the optimized conditions, the calibration graph was linear for 2.4 to 160 ng ml(-1) of nitrite and 4.0 to 100 ng ml(-1) of nitrate. The influences of potential interfering cations and anions for nitrite and nitrate determination were studied. The method is successfully applied for food and water samples. Up to ten samples can be analyzed per hour.