Micron and Submicron-Sized Whey Protein–Pectin Aggregates Generated Via Alkali-Catalyzed Chemical Crosslinking

Citric acid was used to crosslink whey proteins and sugar beet pectin at 50°C with the aid of sodium hydroxide as catalyst. The effects of the pH of biopolymers mixed solution and the duration of the crosslinking process on various characteristics of generated particles were studied. Although the majority of the generated aggregates were of submicron size, particles as small as 59 nm were present. The crosslinking duration did not affect the size of aggregates; however, the samples crosslinked at pH 4.2 were greater than those obtained at pH 7.0. Scanning electron microscopy images revealed that aggregates were not uniformly shaped; differential scanning calorimetry indicated that conjugate whey protein–pectin aggregates had greater thermal stabilities than their parent individual biopolymers. The occurrence of crosslinkages was confirmed by the results of Fourier transform infrared spectroscopy.     

Comparison of optical and structural properties of nanostructure TiO2 thin film doped by Sn and Nb

The thin films of TiO₂ doped by Sn or Nb were prepared by sol–gel method under process control. The effects of Sn and Nb doping on the structural, optical and photo-catalytic properties of applied thin films have been studied by X-ray diffraction (XRD) high resolution transmission electron microscopy and UV–Vis absorption spectroscopy. Surface chemical state of thin films was examined by atomic X-ray photoelectron spectroscopy. XRD results suggest that adding impurities has a great effect on the crystallinity and particle size of TiO₂. Titania rutile phase formation in thin film was promoted by Sn⁴⁺ addition but was inhibited by Nb⁵⁺ doping. The activity of the photocatalyst was evaluated by photocatalytic degradation kinetics of aqueous methylene blue under UV and Visible radiation. The results show that the photocatalytic activity of the Sn-doped TiO₂ thin film have a larger degradation efficiency than Nb-doped TiO₂ under visible light, but under UV light photocatalytic activity of the Nb-doped TiO₂ thin film is better.     

A Practical and Eco-Friendly Method for Conversion of Epoxides to Thiiranes with Immobilized Thiourea on CaCO3

Abstract

Solvent-free conversion of various epoxides to the corresponding thiiranes was carried out efficiently with immobilized thiourea on CaCO₃. The reactions were completed within 1–12 min under oil bath (60 °C–70 °C) conditions to afford thiiranes in 88%–98% yields.

[Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental resource: Figures S1–S3.]

GRAPHICAL ABSTRACT      

An inorganic–organic hybrid material based on ZnO nanoparticles anchored to a composite made from polythiophene and hexagonally ordered silica for use in solid-phase fiber microextraction of PAHs

We report on an inorganic–organic hybrid nanocomposite that represents a novel kind of fiber coating for solid-phase microextraction (SPME) of polycyclic aromatic hydrocarbons (PAHs). The material is composed of ZnO nanoparticles, polythiophene and hexagonally ordered silica, and displays good extraction capability due to its nanostructure. The nanocomposite was synthesized by an in-situ polymerization technique, and the ZnO nanoparticles were anchored to the pores in the walls. The ZnO/polythiophene/hexagonally ordered silica (ZnO/PT/SBA-15) nanocomposite was then deposited on a stainless steel wire to obtain the fiber for SPME of PAHs. Optimum conditions include an extraction temperature of 85 °C (for 30 min only), a desorption temperature of 260 °C (for 2 min), and a salt concentration (NaCl) of 20 % (w/v). The detection limits are between 8.2 and 20 pg mL^?1, and the linear responses extend from 0.1 to 10 ng mL^?1. The repeatability for one fiber (for n?=?5), expressed as relative standard deviation, is between 4.3 and 9.1 %. The method offers the advantage of being simple to use, rapid, and low-cost (in terms of equipment). The thermal stability of the fiber and high relative recovery (compared to conventional methods) represent additional attractive features.

Experimental and Modelling Study of Gravity Drainage in a Three-Block System

Transport in Porous Media - Gravity drainage is known as the controlling mechanism of oil recovery in naturally fractured reservoirs. The efficiency of this mechanism is controlled by...     

Effects of an electric field on the electronic and optical properties of zigzag boron nitride nanotubes

We have investigated the electro-optical properties of zigzag BNNTs, under an external electric field, using the tight binding approximation. It is found that an electric field modifies the band structure and splits the band degeneracy. Also the large electric strength leads to coupling the neighbor subbands which these effects reflect in the DOS and JDOS spectrum. It has been shown that, unlike CNTs, the band gap of BNNTs can be reduced linearly by applying a transverse external electric field. Also we show that the larger diameter tubes are more sensitive than small ones. The semiconducting metallic transition can be achieved through increasing the applied fields. The number and position of peaks in the JDOS spectrum are dependent on electric field strength. It is found that at a high electric field, the two lowest subbands are oscillatory with multiple nodes at the Fermi level.     

Synergistic effect of graphene oxide nanoplatelets and cellulose nanofibers on mechanical,thermal, and barrier properties of thermoplastic starch

In recent years, because of the limited availability of oil resources and the increasing concerns regarding environment protection, much attention has been drawn to produce packaging films based on degradable biopolymers instead of synthetic polymers. On the other hand, because of the high costs of oil extraction, raw materials and film production, and disposing of the waste products of synthetic films, the need to replace these films with less pollutant and more cost‐effective films is growing globally. In this study, to answer the need for replacing synthetic polymer films, nanocomposite films based on thermoplastic starch reinforced with cellulose nanofibers and graphene oxide nanoplatelets were produced and characterized. The results implied that the synergistic effect of cellulose nanofibers and graphene oxide nanoplatelets has played an important role in improving the mechanical properties of the films. The results showed that with the addition of cellulose nanofibers and graphene oxide nanoplatelets, the tensile strength and elastic modulus of starch film were increased from 3 and 32 MPa to 13 and 436 MPa, which corresponds to 438% and 1435% improvement, respectively. In addition, the oxygen permeability resistance and the water vapor transmission for samples containing 3 wt% of graphene oxide nanoplatelets was decreased by 78% and 30% compared with the thermoplastic starch film, respectively. The permeability coefficient of the samples containing 3 wt% graphene oxide nanoplatelets for oxygen, nitrogen, and carbon dioxide have proved to be 0.051, 0.054, and 0.047 barrer, which shows that these films can perform well as packaging films.     

Nanostructure-based electrochemical sensor for determination of glutathione in hemolysed erythrocytes and urine

A sensitive and selective electrochemical method was developed for the determination of glutathione (GSH) in hemolysed erythrocyte using vinylferocene modified carbon nanotubes paste electrode (VFMCNTPE). The results indicate that the electrode is efficient in terms of its electrocatalytic activity for the oxidation of GSH, leading to a reduced overpotential by more than 470 mV. Also, the values of catalytic rate constant (k), and diffusion coefficient (D) for GSH were calculated. The electrocatalytic oxidation peak current of GSH showed two linear dynamic ranges with a detection limit of 0.09 μM GSH. The linear calibration ranges were obtained between 0.2–4.0 and 4.0–250.0 μM GSH using square wave voltammetry (SWV) method. The proposed method was also examined as a selective, simple and precise electrochemical sensor for the determination of GSH in real samples such as urine and hemolysed erythrocyte.     

On the Use of Amperometry for Real Time Assessment of Drug‐Release Profile from Therapeutic Nanoparticles

A simple electrochemical method was used to directly assess the drug‐release profile. The method is based on the multiple pulse amperometric measurement of the oxidation and reduction of doxorubicin released from liposome at a MWCNTs‐modified glassy carbon electrode (MWCNT‐GCE). The released doxorubicin was detected at +0.60 and ?0.60 V by two different oxidation and reduction processes, respectively. The third potential pulse (?1.00 V) was applied for the regeneration of MWCNT‐GCE. The main advantage of this method is that there is no need for any operation for the quantitative analysis during the release of the drug from nanoparticles.     

Targeted Therapy of B7 Family Checkpoints as an Innovative Approach to Overcome Cancer Therapy Resistance: A Review from Chemotherapy to Immunotherapy

It is estimated that there were 18.1 million cancer cases worldwide in 2018, with about 9 million deaths. Proper diagnosis of cancer is essential for its effective treatment because each type of cancer requires a specific treatment procedure. Cancer therapy includes one or more approaches such as surgery, radiotherapy, chemotherapy, and immunotherapy. In recent years, immunotherapy has received much attention and immune checkpoint molecules have been used to treat several cancers. These molecules are involved in regulating the activity of T lymphocytes. Accumulated evidence shows that targeting immune checkpoint regulators like PD-1/PD-L1 and CTLA-4 are significantly useful in treating cancers. According to studies, these molecules also have pivotal roles in the chemoresistance of cancer cells. Considering these findings, the combination of immunotherapy and chemotherapy can help to treat cancer with a more efficient approach. Among immune checkpoint molecules, the B7 family checkpoints have been studied in various cancer types such as breast cancer, myeloma, and lymphoma. In these cancers, they cause the cells to become resistant to the chemotherapeutic agents. Discovering the exact signaling pathways and selective targeting of these checkpoint molecules may provide a promising avenue to overcome cancer development and therapy resistance. Highlights: (1) The development of resistance to cancer chemotherapy or immunotherapy is the main obstacle to improving the outcome of these anti-cancer therapies. (2) Recent investigations have described the involvement of immune checkpoint molecules in the development of cancer therapy resistance. (3) In the present study, the molecular participation of the B7 immune checkpoint family in anticancer therapies has been highlighted. (4) Targeting these immune checkpoint molecules may be considered an efficient approach to overcoming this obstacle.