Structural characterization of epitaxial Cr(x)Mo(1-x) alloy thin films

To develop a model system containing regularly spaced misfit dislocations for studies of the radiation resistance of nanoscale defects, epitaxial thin films of Cr, Mo, and Cr(x)Mo(1-x) alloys were deposited on MgO(001) by molecular beam epitaxy. Film compositions were chosen to vary the lattice mismatch with MgO. The film structure was investigated by x-ray diffraction (XRD), Rutherford backscattering spectrometry (RBS) and scanning transmission electron microscopy (STEM). Epitaxial films with reasonably high crystalline quality and abrupt interfaces were achieved at a relatively low deposition temperature, as confirmed by STEM. However, it was found by XRD and RBS in the channeling geometry that increasing the Mo content of the CrMo alloy films degraded the crystalline quality, despite the improved lattice match with MgO. XRD rocking curve data indicated that regions of different crystalline order may be present within the films with higher Mo content. This is tentatively ascribed to spinodal decomposition into Cr-rich and Mo-rich regions, as predicted by the Cr(x)Mo(1-x) phase diagram.     

Thickness shear mode resonators (“mass-sensitive devices”) in bioanalysis

A short overview of function and experimental set-ups of acoustic wave devices is given which, in contrast to other bioanalysis techniques, are based on a mechanical transduction mechanism. The most frequently used device is the thickness shear mode resonator (TSMR), which in the last few years was intensively employed in biosensor applications. TSMR biosensor studies in the field of nucleic acid interaction, adsorption of proteins to surfaces and immunosensing are reviewed. A main point concerns the interpretation of the sensor response not only in terms of mass loading, which underestimates the capabilities of these devices.     

1,3‐Diaxial Repulsion vs. π‐Delocalization in the 7‐Amino‐2,4‐diazabicyclo[3.3.1]nonan‐3‐one Skeleton

(1R,5S,6S,8R)‐6,8,9‐Trihydroxy‐3‐oxo‐2,4‐diazabicyclo[3.3.1]nonan‐7‐ammonium chloride hydrate ( 3 Cl⋅H₂O) and (1R,5S,6S,8R)‐7‐amino‐6,8,9‐trihydroxy‐2,4‐diazabicyclo[3.3.1]nonan‐3‐one ( 4 ) have been prepared, and their crystal structures have been determined from single‐crystal X‐ray diffraction data. Both compounds consist of a bicyclic skeleton with the three N‐atoms in an all‐cis‐1,3,5‐triaxial arrangement. Considerable repulsion between these axial N‐atoms is indicated by a significant distortion of the two cyclohexane chairs and by increased N⋅⋅⋅N distances. The lone pair of the free amino group of 4 is involved in intermolecular H‐bonding and is turned away from the adjacent carbonyl C‐atom of the urea moiety. The structural properties together with the observed reactivity do not provide any evidence for an intramolecular donor‐acceptor interaction between the carbonyl C‐ and the amine N‐atom.     

Radical copolymerization of vinylidene fluoride with 1‐bromo‐2,2‐difluoroethylene

The radical copolymerization of vinylidene fluoride (VDF) and 1‐bromo‐2,2‐difluoroethylene (BDFE) in 1,1,1,3,3‐pentafluorobutane solution at different monomer molar ratios (ranging from 96/4 to 25/75 mol %) and initiated by tert‐butylperoxypivalate (TBPPI, mainly) is presented. Poly(VDF‐co‐BDFE) copolymers of various aspects (from white powders to yellow viscous liquids) were produced depending on the copolymer compositions. The microstructures of the obtained copolymers were characterized by ¹⁹F and ¹H NMR spectroscopy and by elementary analysis and these techniques enabled one to assess the contents of both comonomers in the produced copolymers. VDF was shown to be more incorporated in the copolymer than BDFE. From the extended Kelen and Tudos method, the kinetics of the radical copolymerization led to the determination of the reactivity ratios, r_i, of both comonomers (r_VDF = 1.20 ± 0.50 and r_{BDFE =} 0.40 ± 0.15 at 75 °C) showing that VDF is more reactive than BDFE. Alfrey‐Price's Q and e values of BDFE monomer were calculated to be 0.009 (from Q_VDF = 0.008) or 0.019 (from Q_VDF = 0.015) and +1.22 (vs. e_VDF = 0.40) or +1.37 (vs. e_VDF = 0.50), respectively, indicating that BDFE is an electron‐accepting monomer. Statistic cooligomers were produced with molar masses ranging from 1,800 to 5,500 g/mol (assessed by GPC with polystyrene standards). A further evidence of the successful copolymerization was shown by the selective reduction of bromine atoms in poly(VDF‐co‐BDFE) cooligomers that led to analog PVDF. The thermal properties of the poly(VDF‐co‐BDFE) cooligomers were also determined and those containing a high VDF amount exhibited a high thermal stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3964–3976, 2010.     

G-type Halohydrin Dehalogenases Catalyze Ring Opening Reactions of Cyclic Epoxides with Diverse Anionic Nucleophiles**

Halohydrin dehalogenases are promiscuous biocatalysts, which enable asymmetric ring opening reactions of epoxides with various anionic nucleophiles. However, despite the increasing interest in such asymmetric transformations, the substrate scope of G-type halohydrin dehalogenases toward cyclic epoxides has remained largely unexplored, even though this subfamily is the only one known to display activity with these sterically demanding substrates. Herein, we report on the exploration of the substrate scope of the two G-type halohydrin dehalogenases HheG and HheG2 and a newly identified, more thermostable member of the family, HheG3, with a variety of sterically demanding cyclic epoxides and anionic nucleophiles. This work shows that, in addition to azide and cyanide, these enzymes facilitate ring-opening reactions with cyanate, thiocyanate, formate, and nitrite, significantly expanding the known repertoire of accessible transformations.     

Tuning the magnetic properties of Zn1-xCoxO films

We compare the magnetic properties of two types of Co-doped ZnO films grown on sapphire with distinct structural quality. SQUID magnetometry as well as element-specific synchrotron studies reveal pure paramagnetic behavior for the samples with the highest structural quality, whereas samples with reduced structural quality exhibit superparamagnetic blocking behavior. In this sample signatures of phase separation are detected by X-ray diffraction and X-ray linear dichroism which accounts for the superparamagnetic blocking.     

In-situ imaging of the nucleation and growth of epitaxial anatase TiO2(001) films on SrTiO3(001)

The growth of TiO₂ anatase films on Nb‐doped SrTiO₃(001) molecular beam epitaxy has been studied in-situ by scanning tunneling microscopy. We show that the initial growth follows the Stranski–Krastanov mode, where islands form on top of a wetting layer consisting of two monolayers (ML) of TiO₂. The epitaxial islands subsequently nucleate and coalesce into large commonly oriented crystallites. The reconstruction observed by reflection high-energy electron diffraction (RHEED) is shown to result from the coexistence of individual (4 × 1) and (1 × 4) reconstructions present on different crystallite surfaces. The anatase grows in units of bilayers, resulting in a step height of 2 ML (~ 0.5 nm). This result explains the fact that the measured period of the RHEED specular-beam intensity oscillations corresponds to the time required for deposition of 2 ML. Ar ion sputtering and UHV annealing results in a transformation to coexisting (4 × 1) and (1 × 4) reconstructed terraces on individual crystallites, as commonly observed by ex-situ STM studies.