Optical and structural properties of lead iodide thin films prepared by vacuum evaporation method

Thermally processed lead iodide (PbI₂) thin films were prepared by the vacuum evaporation method in a constant ambient. Measured thickness of the film was verified analytically from the optical transmittance data in a wavelength range between 300 and 1600 nm. From the Tauc relation for the non‐direct inter band transition, the optical band gap of the film was found to be 2.58 eV for film thickness 300 nm. X‐ray diffraction analysis confirmed that PbI₂ films are polycrystalline, having hexagonal structure. The low fluctuation in Urbach energy indicates that the grain size is quite small. The present findings are in agreement with the other results. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Nucleation of microcracks during dislocation interactions in a Ti<Subscript>3</Subscript>Al single crystal

Reactions between superdislocations involved in deformation in the basal, prismatic, and type-I and II pyramidal planes in single-crystal Ti₃Al are considered. The types of dislocation interactions are established that result in the formation dislocation barriers (microcrack nuclei). The force and energy conditions for microcracks to arise are found. The interaction between a and 2c + a superdislocations results in microcracks with the plane of opening lying in basal and pyramidal planes; the interaction of 2c + a superdislocations in different pyramidal planes results in the formation of microcracks in prismatic and pyramidal planes; and the interaction of a superdislocations in basal and/or pyramidal planes does not cause the formation of dislocation barriers. The types of microcracks are classified in terms of the orientation of deformation axes of single crystals, and the regions of the stereographic triangle are determined characterized by a preferential type of crack opening.     

Bound states and resonance states of the plasma-embedded tdμ and ddμ molecular ions

We have investigated the bound states and resonance states of plasma-embedded tdμ and ddμ molecular ions using accurate correlated basis functions. The plasma effect has been taken care of by considering the Debye shielding approach of plasma modeling which admits a variety of plasma conditions. The density of resonance states are calculated using the stabilization method. The ground and excited states energies, and the S-wave resonance energies of tdμ and ddμ molecular ions immersed in plasmas are reported for various shielding parameters, along with the 1S and 2S threshold energies of the tμ and dμ atoms.     

Polycyclic aromatic hydrocarbon and ionic compositions of atmospheric bulk deposition samples at a national park under the influence of intense barbecue smoke

The main aim of this study was to present the effects of barbecue smoke on a small-scale environment, a national park under the influence of intense barbecue smoke, and to scientifically support the sustainable usage of the park. Twelve-weekly bulk deposition samples were collected directly at the barbecuing area, and the samples were analysed for 16 US EPA’s priority PAH compounds and major ions. The mean concentrations of the individual PAHs in the bulk deposition samples ranged from 11.8 ng L^?1 (Ane) to 1085 ± 581 ng L^?1 (IcdP). The most frequently observed PAH compounds in the bulk deposition samples were Np, Anp, Flr, Phe, An, Flu, BkF, BaP and IcdP. The mean total PAH deposition fluxes were determined as 3.6 ± 5.6 µg m^?2 day^?1. The chloride, potassium and the sulphate fluxes were determined as 145.2 ± 267.8 µg m^?2 day^?1, 182.9 ± 291.9 µg m^?2 day^?1, and 111.9 ± 65.9 µg m^?2 day^?1, respectively. Dominant ions in the bulk deposition samples were potassium ion, chloride and sulphate which addressed as the fingerprint of barbecue grilling.     

Spin-polarized two-dimensional electron gas at oxide interfaces

The possibility of formation of a fully spin-polarized 2D electron gas at the SrMnO_3/(LaMnO_3)_1/SrMnO_3 heterostructure is predicted from density-functional calculations. The La(d) electrons become confined in the direction normal to the interface in the electrostatic potential well of the positively charged layer of La atoms, acting as electron donors. These electrons mediate a ferromagnetic alignment of the Mn t_2g spins near the interface via Zener double exchange and become, in turn, spin-polarized due to the internal magnetic fields of the Mn moments.     

Long-range one-dimensional longitudinal optical binding

We create extended longitudinally optically bound chains of microparticles with the use of counterpropagating "nondiffracting" light fields, the so-called Bessel beams. The beam homogeneity and extended propagation range allow the creation of 200 microm long chains of organized microparticles. We observe short-range multistability within a single chain and long-range multistability between several distinct chains. Our observations are supported by theoretical results of the coupled dipole method.     

Plasma jets driven by ultraintense-laser interaction with thin foils

Experimental evidence of plasma jets ejected from the rear side of thin solid targets irradiated by ultraintense (>10(19) W cm(-2)) laser pulses is presented. The jets, detected by transverse interferometric measurements with high spatial and temporal resolutions, show collimated expansion lasting for several hundreds of picoseconds and have substantially steep density gradients at their periphery. The role played by radiation pressure of the laser in the jet formation process is highlighted analytically and by extensive two-dimensional particle-in-cell simulations.     

Thermodynamic model for the size-dependent melting of prism-shaped nanoparticles

We report on the size-dependent melting of prism-shaped nanoparticles based on thermodynamic model and applied to understand the melting of prism-shaped indium nanoparticles. It is shown here that the bulk melting temperature cannot be extrapolated from the nanoscale and the extrapolated value will always be lower than the bulk melting temperature as has been observed experimentally.     

Ultrashort laser ablation of PMMA and intraocular lenses

The use of intraocular lenses (IOLs) is the most promising method to restore vision after cataract surgery. Several new materials, techniques, and patterns have been studied for forming and etching IOLs to improve their optical properties and reduce diffractive aberrations. This study is aimed at investigating the use of ultrashort laser pulses to ablate the surface of PMMA and intraocular lenses, and thus provide an alternative to conventional techniques. Ablation experiments were conducted using various polymer substrates (PMMA samples, hydrophobic acrylic IOL, yellow azo dye doped IOL, and hydrophilic acrylic IOL consist of 25% H₂O). The irradiation was performed using 100 fs pulses of 800 nm radiation from a regeneratively amplified Ti:sapphire laser system. We investigated the ablation efficiency and the phenomenology of the ablated patterns by probing the ablation depth using a profilometer. The surface modification was examined using a high resolution optical microscope (IOLs) or atomic force microscope—AFM (PMMA samples). It was found that different polymers exhibited different ablation characteristics, a result that we attribute to the differing optical properties of the materials. In particular, it was observed that the topography of the ablation tracks created on the hydrophilic intraocular lenses was smoother in comparison to those created on the PMMA and hydrophobic lens. The yellow doped hydrophobic intraocular lenses show higher ablation efficiency than undoped hydrophobic acrylic lenses.     

Spectroscopic Properties of Lumiflavin: A Quantum Chemical Study

In this work, the electronic structure and spectroscopic properties of lumiflavin are calculated using various quantum chemical methods. The excitation energies for ten singlet and triplet states as well as the analysis of the electron density difference are assessed using various wave function‐based methods and density functionals. The relative order of singlet and triplet excited states is established on the basis of the coupled cluster method CC2. We find that at least seven singlet excited states are required to assign all peaks in the UV/Vis spectrum. In addition, we have studied the solvatochromic effect on the excitation energies and found differential effects except for the first bright excited state. Vibrational frequencies as well as IR, Raman and resonance Raman intensities are simulated and compared to their experimental counterparts. We have assigned peaks, assessed the effect of anharmonicity, and confirmed the previous assignments in case of the most intense transitions. Finally, we have studied the NMR shieldings and established the effect of the solvent polarity. The present study provides data for lumiflavin in the gas phase and in implicit solvent model that can be used as a reference for the protein‐embedded flavin simulations and assignment of experimental spectra.