Optimization of Levan Production by Cold-Active <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> ANT 179 and Fructooligosaccharide Synthesis by Its Levansucrase

Fructooligosaccharides (FOS) and levan attract much attention due to a wide range of applications in food technology and pharmaceutical and cosmetic industry. Bacillus licheniformis ANT 179, isolated from Antarctica soil, produced levansucrase and levan in a medium containing sucrose as carbon substrate. In this study, characterization of levansucrase and production of short-chain FOS and levan were investigated. Temperature and pH optimum of the enzyme were found to be 60 °C and pH 6.0, respectively. The optimization of fermentation conditions for levan production using sugarcane juice by response surface methodology (RSM) was carried out. Central composite rotatable design was used to study the main and the interactive effects of medium components: sugarcane juice and casein peptone concentration on levan production by the bacterium. The optimized medium with sugarcane juice at 20 % (v/v) and casein peptone at 2 % (w/v) was found to be optimal at an initial pH of 7.0 and incubation temperature of 35 °C for 48 h. Under these conditions, the maximum levan concentration was 50.25 g/L on wet weight basis and 16.35 g/L on dry weight basis. The produced inulin type FOS (kestose and neokestose) and levan were characterized by Fourier transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance (NMR) analysis. The study revealed that the levansucrase could form FOS from sucrose. The locally available low-cost substrate such as sugarcane juice in the form of a renewable substrate is proposed to be suitable even for scale-up production of enzyme and FOS for industrial applications. The levan and FOS synthesized by the bacterium are suitable for food applications and biomedical uses as the bacterium has GRAS status and devoid of endotoxin as compared to other Gram-negative bacteria.     

Provably secure dynamic identity-based three-factor password authentication scheme using extended chaotic maps

With the aim of guaranteeing secure communication through public networks, three-factor password authentication (TF-PWA) scheme plays a key role in many internet applications. Since in TF-PWA scheme, the communicating entities can mutually authenticate each other and generate a shared session key, which will be used for secure exchange of messages in succeeding communication among them. As a result, the TF-PWA schemes gain enormous consideration in recent years. More recently, due to light-weight features of the extended chaotic map, it is also extensively applied in designing of public key encryption, key agreement, image encryption, S-box, hash function, digital signature, password authentication, etc. The aim of this paper was to design a dynamic identity-based three-factor password authentication scheme using extended chaotic map (ECM-TF-PWA) in the random oracle model. The proposed scheme is provably secure based on the intractability assumption of chaotic map-based Diffie–Hellman problem. The informal security analysis gives the evidence that our scheme protects all attacks and provides functionality attributes that are needed in a three-factor authentication system. Besides, the performance discussion shows that our scheme performs better than others in respect of computation and communication cost.     

Simple theoretical model of shear viscosity in isotopic fluid mixtures

We propose a simple hybrid model for the shear viscosity of isotopic fluid mixtures by coupling the contribution of the Stokes–Einstein relation with the existing linear model of Roults's law for the shear viscosity. The calculated values of shear viscosity using this simple hybrid model are found to be in excellent agreement with the molecular dynamics (MD) simulation results. The calculated value of the shear viscosity obtained from the theoretical model as well as the MD simulation increases with increasing mass ratio.     

Effect of Nd3+ concentration on CW and pulsed performance of fiber-coupled diode laser pumped Nd:YVO4 laser at 1064 nm

The effect of Nd³⁺ concentration on the CW and Q-switched laser performances at 1064 nm from Nd: YVO₄ has been studied under diode laser pumping in identical laser configuration. The Nd³⁺ concentrations used were 1, 2 and 3 at.% in YVO₄ crystals. Under the CW operations we have compared the thermal lensing effect, slope efficiencies and also the beam quality at the fourth-order degeneracy configuration. Q-switching was done with the help of an acousto-optic modulator and we have compared the pulses obtained from Nd: YVO₄ laser with different doping concentration. It was found that the 1 at.%-doped crystal is the best, offering highest optical-to-optical conversion efficiency (55%), lowest fractional heat load (24%), highest pulse energy (80 μJ) and shortest pulse width (20 ns). It was also found that there was not much difference in performances for 2 and 3 at.%-doped crystals both in CW and Q-switched configurations.     

Semidiffuse states of diatomic molecules: Configuration interaction studies of the lowest 2Σ+ and 2Δ states of NS,SiF, and CCl

It has been shown by ab initio configuration-interaction methods that the lowest ²Σ⁺ states of NS and SiF are ‘semidiffuse’ states, like the B ²Σ⁺ state of PO. The lowest ²Σ⁺ state of CCl also appears to be semidiffuse, although here the situation is not so clear. Semidiffuse states require diffuse orbitals in the wavefunction, but they are not Rydberg states. The second ²Σ⁺ state of each molecule is shown to be the lowest ns Rydberg state, whereas the third ²Σ⁺ state is a valence state for NS and CCl, and a 4po Rydberg state for SiF. The lowest ²δ state of each molecule derives from the 7σ → 3π valence configuration. Comparison with available experimental information shows, in general, good agreement.     

Interaction of metallic nanoparticles with a biologically active molecule, dopamine

We present the results of first-principles molecular orbital calculations describing the interaction of metallic nanoparticles, represented by Mn(13), Ag(13), and Al(13) atomic clusters, with a biologically active molecule, dopamine. The interaction strength, determined in terms of the nanoparticle-molecule complex binding energy, is found to be higher for Mn than either Ag or Al and can be explained in terms of the degree of the hybridization of the (metal) atomic orbitals with the molecular orbitals in the complex. Furthermore, smaller interaction strength of these metallic nanoparticles with water compared to that with dopamine predicts the preference of forming a complex of dopamine with the metallic nanoparticles in the aqueous solution. The calculated results may therefore suggest that the presence of these metallic nanoparticles could induce different levels of dopamine depletion in solution.     

Existence of solutions for three-point boundary value problems for second order equations

Shooting methods are employed to obtain solutions of the three-point boundary value problem for the second order equation, where is continuous, and and conditions are imposed implying that solutions of such problems are unique, when they exist.

     

Spin, charge and lattice couplings in Cu-deficient oxysulphide BiOCu0.94S

The electrical and magnetic properties of slightly Cu-deficient BiOCu(0.94)S are investigated using neutron diffraction, ac magnetic susceptibility, magnetization and electrical resistivity measurements. The Cu spins order in a ferromagnetic arrangement below T(C) = 250 K. An antiferromagnetic component develops below 180 K when the crystalline unit cell experiences a sharp thermal contraction upon cooling, resulting in a canted ferromagnetic spin arrangement at low temperatures. In the magnetically ordered state the electrical transport can be described using three-dimensional variable range hopping conduction. An applied magnetic field can effectively reduce the hopping barrier. Spin-charge couplings are clearly revealed when the resistivity departs from the hopping conduction and begins to increase with increasing temperatures above 250 K where the Cu spins become disordered.     

Working group report: Heavy-ion physics and quark-gluon plasma

This is the report of Heavy Ion Physics and Quark-Gluon Plasma at WHEPP-09 which was part of Working Group-4. Discussion and work on some aspects of quark-gluon plasma believed to have created in heavy-ion collisions and in early Universe are reported.     

Shortest Path Problem on a Network with Imprecise Edge Weight

A network with its arc lengths as imprecise number, instead of a real number, namely, interval number and triangular fuzzy number is considered here. Existing ideas on addition and comparison between two imprecise numbers of same type are introduced. To obtain a fuzzy shortest path from a source vertex to all other vertices, a common algorithm is developed which works well on both types of imprecise numbers under consideration. In the proposed algorithm, a decision-maker is to negotiate with the obtained fuzzy shortest paths according to his/her view only when the means are same but the widths are different of the obtained paths. Otherwise, a fuzzy optimal path is obtained to which the decision-maker always satisfies with different grades of satisfaction. All pairs fuzzy shortest paths can be found by repeated use of the proposed algorithm.