Direct imaging of Cu dimer formation, motion, and interaction with Cu atoms on Ag(111)

We have investigated the formation and motion of copper adatoms and addimers on Ag(111) between 6 and 25 K with low-temperature scanning tunneling microscopy. The presence of atoms and dimers alters the motion of atoms and dimers via the long-range interaction mediated by the electrons in the two-dimensional surface state band. Above 16 K, dimers show quantum rotor behavior with altered rotational behavior in the presence of an additional adatom. The most favorable diffusional motion of the dimer is identified in combination with molecular dynamics calculations to be a zigzag out-of-cell motion starting above 24 K.     

Local density of states of a three-dimensional conductor in the extreme quantum limit

The electronic structure of the narrow gap semiconductor InAs is investigated by scanning tunneling spectroscopy and magnetotransport measurements in the extreme quantum limit. The well-known oscillations of the Hall coefficient are reproduced and the last, most pronounced oscillation is shown to be correlated with the appearance of corrugations in the local density of states. While the increasing part of the Hall constant corresponds to the existence of isolated patterns indicating magnetic field induced localization, the decreasing part correlates with the development of a network which most likely consists of one-dimensional channels. We conclude that the decrease of the Hall constant in the extreme quantum limit is caused by a transition from a purely three-dimensional to a partly one-dimensional transport regime.     

Quantum chemical and RRKM calculations of reactions in the H/S/O system

Quantum chemical calculations at the MRCI/aug-cc-pV5Z level are used to describe the conversions between HSO, HOS, H + SO, S + OH and O + SH on the doublet H/S/O potential energy surface. An RRKM analysis of this multiple-well system was carried out in the temperature range 300-2000 K between 0.1 and 10 atm. At these pressures, the stabilization reaction H + SO → HSO or HOS is at the low pressure limit, and stabilization from S + OH and O + SH was not detected. The reactions S + OH → H + SO and O + SH → H + SO were found to be barrierless and very fast at room temperature (4 × 10¹⁴ and 1.5 × 10¹⁴ cm³ mol⁻¹ s⁻¹, respectively). The reaction channel O + SH → S + OH is two orders of magnitude slower than the more exothermic O + SH → H + SO reaction, although a second pathway involving direct H-abstraction (O + SH → S + OH) on the quartet surface appears as a minor channel at high temperatures.     

Über Derivate des Diacetonalkamins

Ohne Zusammenfassung     

Apparate

Ohne Zusammenfassung     

Ritter-enabled catalytic asymmetric chloroamidation of olefins

Intermolecular asymmetric haloamination reactions are challenging due to the inherently high halenium affinity (HalA) of the nitrogen atom, which often leads to N-halogenated products as a kinetic trap. To circumvent this issue, acetonitrile, possessing a low HalA, was used as the nucleophile in the catalytic asymmetric Ritter-type chloroamidation of allyl-amides. This method is compatible with Z and E alkenes with both alkyl and aromatic substitution. Mild acidic workup reveals the 1,2-chloroamide products with enantiomeric excess greater than 95% for many examples. We also report the successful use of the sulfonamide chlorenium reagent dichloramine-T in this chlorenium-initiated catalytic asymmetric Ritter-type reaction. Facile modifications lead to chiral imidazoline, guanidine, and orthogonally protected 1,2,3 chiral tri-amines.

Intermolecular haloamination reactions are challenging due to the high halenium affinity of the nitrogen atom. This is circumvented by using acetonitrile as an attenuated nucleophile, resulting in an enantioselective halo-Ritter reaction.     

Trehalose-6-Phosphate as a Potential Lead Candidate for the Development of Tps1 Inhibitors: Insights from the Trehalose Biosynthesis Pathway in Diverse Yeast Species

In some pathogens, trehalose biosynthesis is induced in response to stress as a protection mechanism. This pathway is an attractive target for antimicrobials as neither the enzymes, Tps1, and Tps2, nor is trehalose present in humans. Accumulation of T6P in Candida albicans, achieved by deletion of TPS2, resulted in strong reduction of fungal virulence. In this work, the effect of T6P on Tps1 activity was evaluated. Saccharomyces cerevisiae, C. albicans, and Candida tropicalis were used as experimental models. As expected, a heat stress induced both trehalose accumulation and increased Tps1 activity. However, the addition of 125 μM T6P to extracts obtained from stressed cells totally abolished or reduced in 50 and 60 % the induction of Tps1 activity in S. cerevisiae, C. tropicalis, and C. albicans, respectively. According to our results, T6P is an uncompetitive inhibitor of S. cerevisiae Tps1. This kind of inhibitor is able to decrease the rate of reaction to zero at increased concentrations. Based on the similarities found in sequence and function between Tps1 of S. cerevisiae and some pathogens and on the inhibitory effect of T6P on Tps1 activity observed in vitro, novel drugs can be developed for the treatment of infectious diseases caused by organisms whose infectivity and survival on the host depend on trehalose.     

Conformational landscape of platinum(II)-tetraamine complexes: DFT and NBO studies

The potential energy surfaces of chiral tetraamine Pt(II) coordination complexes were computed at the B3LYP/LANL2DZ level of theory by a systematic variation of two dihedral angles: C12–C15–C34–C37 (θ) and C24–C17–C31–C48 (ψ) employing a grid resolution of 30°. Potential energy surfaces calculated using density functional theory methods and Boltzmann-derived populations revealed strong preference for one diasteromer of each series studied. In addition, natural bond orbital analysis show that the minima are stabilized predominantly by a combination of electronic interactions between two phenyl groups, the phenyl groups and the Pt²⁺ ion, as well as with the amine groups. Additional experimental characterization of the diasteroisomers studied here is in progress and will permit further molecular modeling studies with the appropriate stereochemistry.     

A new controlled release system of chlorhexidine and chlorhexidine:βcd inclusion compounds based on porous silica

The purpose of this study was to prepare and characterize a controlled release system based on porous silica loaded with chlorhexidine (Cx) and its inclusion compounds in β-cyclodextrin (βcd), and to evaluate its antimicrobial activity. Acetate chlorhexidine (CxA), gluconate chlorhexidine (CxG), βcd:chlorhexidine acetate 2:1 (βcd:CxA) and βcd:chlorhexidine gluconate 2:1 (βcd:CxG) were incorporated into porous silica. Drug loading was characterized by FTIR, powder X-ray diffraction, thermal analysis and BET, and was shown to be in an amorphous state and porous matrix. The kinetics release parameter of the drug was established, which showed that the Cx systems release profile followed zero order release until 400 h and Higuchi model release until 750 h, after the burst effect at the first 8 h. Chlorhexidine therapeutic range was reached near first hour for all systems. The chlorhexidine porous silica system was biologically active against Enterococcus faecalis and Candida albicans in vitro. The systems showed an efficient Cx controlled release modulated by the presence of the β-cyclodextrin and by the porous silica matrices, providing effective antimicrobial activity.     

Facially coordinating triamine ligands with a cyclic backbone: some structure-stability correlations

Metal complex formation of the two cyclic triamines 6-methyl-1,4-diazepan-6-amine (MeL(a)) and all-cis-2,4,6-trimethylcyclohexane-1,3,5-triamine (Me(3)tach) was studied. The structure of the free ligands (H(x)MeL(a))(x+) and H(x)Me(3)tach(x+) (0 ≤ x ≤ 3) was investigated by pH-dependent NMR spectroscopy and X-ray diffraction experiments. The crystal structure of (H(2)Me(3)tach)(p-O(3)S-C(6)H(4)-CH(3))(2) showed a chair conformation with axial nitrogen atoms for the doubly protonated species. In contrast to a previous report, Me(3)tach was found to be a stronger base than the parent cis-cyclohexane-1,3,5-triamine (tach); pK(a)-values of H(3)Me(3)tach(3+) (25 °C, 0.1 M KCl): 5.2, 7.4, 11.2. The crystal structures of (H(3)MeL(a))(BiCl(6))·2H(2)O and (H(3)MeL(a))(ClO(4))Cl(2) exhibited two distinct twisted chair conformations of the seven membered diazepane ring. [Co(MeL(a))(2)](3+) (cis: 1(3+), trans: 2(3+)), trans-[Fe(MeL(a))(2)](3+) (3(3+)), [(MeL(a))ClCd(μ(2)-Cl)](2) (4), trans-[Cu(MeL(a))(2)](2+) (5(2+)), and [Cu(HMeL(a))Br(3)] (6) were characterized by single crystal X-ray analysis of 1(ClO(4))(3)·H(2)O, 2Br(3)·H(2)O, 3(ClO(4))(3)·0.8MeCN·0.2MeOH, 4, 5Br(2)·0.5MeOH, and 6·H(2)O. Formation constants and redox potentials of MeL(a) complexes were determined by potentiometric, spectrophotometric, and cyclovoltammetric measurements. The stability of [M(II)(MeL(a))](2+)-complexes is low. In comparison to the parent 1,4-diazepan-6-amine (L(a)), it is only slightly enhanced. In analogy to L(a), MeL(a) exhibited a pronounced tendency for forming protonated species such as [M(II)(HMeL(a))](3+) or [M(II)(MeL(a))(HMeL(a))](3+) (see 6 as an example). In contrast to MeL(a), Me(3)tach forms [M(II)L](2+) complexes (M = Cu, Zn) of very high stability, and the coordination behavior corresponds mainly to an "all-or-nothing" process. Molecular mechanics calculations showed that the low stability of L(a) and MeL(a) complexes is mainly due to a large amount of torsional strain within the pure chair conformation of the diazepane ring, required for tridentate coordination. This behavior is quite contrary to Me(3)tach and tacn (tacn =1,4,7-triazacyclononane), where the main portion of strain is already preformed in the free ligand, and the amount, generated upon complex formation, is comparably low.