Fluorescence study of the solvation of fluorescent probes prodan and laurdan in poly(epsilon-caprolactone)-block-poly(ethylene oxide) vesicles in aqueous solutions with tetrahydrofurane

Steady-state and time-resolved fluorescence measurements were used to study the relaxation of the microenvironment of hydrophobic probes 6-propionyl-2-(dimethylamino)naphthalene (prodan) and 6-dodecanoyl-2-(dimethylamino)naphthalene (laurdan) in systems containing vesicles formed by the amphiphilic diblock copolymer poly(epsilon-caprolactone)-block-poly(ethylene oxide) (PCL-PEO) and water/tetrahydrofurane (THF) solvent mixtures. It was found that in case of prodan, both steady-state and time-resolved emission spectra were composed of two subspectra corresponding to the emission of prodan molecules located (i) in fairly rigid (effectively viscous) and hydrophobic domains of the vesicles close to the PCL/PEO interface and (ii) in a more polar and less viscous medium (in the bulk solution). The fraction of the emission from the more polar microenvironment increases with increasing content of THF in the system. Laurdan, in contrast to prodan, appeared to be solubilized preferentially in the hydrophobic domains up to 30 vol % of THF content, and its emission spectra changed only due to swelling of hydrophobic PCL domains by added THF. The study shows that the analysis of the time-resolved emission from a probe distributed in two media is, in principle, possible, but it is quite complex and appreciably less accurate, and the relaxation times are ill-defined averages of several processes. The bimodal or shoulder-containing time-resolved spectra have to be decomposed in pertinent time-resolved subspectra and treated separately. Another important result of the study is a piece of knowledge concerning the motion of the probe with respect to the vesicle. In the studied complex system, not only the relaxation of the solvent and reorganization of polymer segments around the fluorescent headgroup of the probe affect the emission but also a lateral motion of the probe with respect to the nanoparticle within the lifetime of the excited state contributes significantly to the relaxation and to the relatively slow time-resolved Stokes shift.     

Rapid identification of common hexapyranose monosaccharide units by a simple TOCSY matching approach

Solution NMR spectroscopy is a well established technique for non-destructive characterization of the structures and conformations of complex oligo- and polysaccharides. One of the key experiments involves the use of 2D TOCSY to collect the 1H spins into groups that can be associated with the individual saccharide units that are present in the molecule under study. It is well known that the magnetization transfer rate through the 1H spin system during the TOCSY spin lock period is sensitive to the intervening 3J(H,H) scalar couplings, and therefore also to the saccharide stereochemistry. Here, we have investigated the potential to extract information on the stereochemistry of hexapyranose monosaccharide units directly from TOCSY spectra. Through a systematic experimental investigation of the magnetization transfer initiated from the anomeric 1H resonance in D-glucose, D-galactose and D-mannose it is shown that a 100 ms spin lock time provides optimal spectroscopic discrimination between these three commonly occurring building blocks. A simple matching scheme is proposed as a new tool for rapid attribution of the TOCSY traces originating from the anomeric 1H resonances towards the underlying monosaccharide type. The scheme appears robust with regard to structural variations and fairly tolerant to incidental overlap. Its application provides useful guidance during the subsequent NMR assignment process, as demonstrated with the PS7F polysaccharide from Streptococcus pneumonia. In addition, we show that our scheme affords a clear-cut distinction between the alpha- and beta-epimers of D-mannose-type units, which can be difficult to discriminate by NMR analysis. Application to the N-glycan 100.2 demonstrates the potential and wide applicability of this new discrimination approach.     

Reliable, rapid and simple voltammetric detection of urea nitrate explosive

A highly selective and rapid electrochemical assay of the improvised explosive urea nitrate (UN) is reported. The method involves a short ( approximately 10 s) acid-catalyzed reaction of UN with 4-nitrotoluene (NT) followed by a rapid ( approximately 2 s) square-wave voltammetric (SWV) detection of the 2,4-dinitrotoluene (DNT) product. The new protocol offers great promise for a reliable field detection of UN, with significant advantages of speed, sensitivity, portability, simplicity, and cost.     

Preparative separation of immunoglobulins from bovine colostrum by continuous divergent-flow electrophoresis

Immunoglobulins in bovine colostrum were separated and fractionated from other proteins using the method and instrumentation developed in our laboratory. The proposed separation was based on bidirectional isotachophoresis/moving boundary electrophoresis with electrofocusing of the analytes in a pH gradient from 3.9 to 10.1. The preparative instrumentation included the trapezoidal non-woven fabric that served as separation space with divergent continuous flow. The defatted and casein precipitate-free colostrum supernatant was loaded directly into the instrument without any additional colostrum pre-preparation. Immunoglobulin G was fractionated from other immune proteins such as bovine serum albumin, β-lactoglobulin, and α-lactalbumin, and was continuously collected in separated fractions over 3 h. The fractions were further processed, and isolated immunoglobulin G in the liquid fractions was confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and by re-focusing in gel isoelectric focusing. Separated immunoglobulin G was detected in seven fractions by sodium dodecyl sulfate-polyacrylamide gel electrophoresis with a gradually decreased concentration in the fractions. Re-focusing of the proteins in the fractions by gel isoelectric focusing revealed multiple separated zones of immunoglobulin G with the isoelectric point values covering the range from 5.4 to 7.2. Each fraction contained distinct zones with gradually increased isoelectric point values and decreased concentrations from fraction to fraction.     

Impact of silica environment on hyperfine interactions in 𝜖-Fe2O3 nanoparticles

Magnetic nanoparticles have found broad applications in medicine, especially for cell targeting and transport, and as contrast agents in MRI. Our samples of ??-Fe₂O₃ nanoparticles were prepared by annealing in silica matrix, which was leached off and the bare particles were then coated with amorphous silica layers of various thicknesses. The distribution of particle sizes was determined from the TEM pictures giving the average size ～20 nm and the thickness of silica coating ～5; 8; 12; 19 nm. The particles were further characterized by the XRPD and DC magnetic measurements. The nanoparticles consisted mainly of ??-Fe₂O₃ with admixtures of ～1 % of the α phase and less than 1 % of the γ phase. The hysteresis loops displayed coercivities of ～2 T at room temperature. The parameters of hyperfine interactions were derived from transmission Mössbauer spectra. Observed differences of hyperfine fields for nanoparticles in the matrix and the bare ones are ascribed to strains produced during cooling of the composite. This interpretation is supported by slight changes of their lattice parameters and increase of the elementary cell volume deduced from XRD. The temperature dependence of the magnetization indicated a two-step magnetic transition of the ??-Fe₂O₃ nanoparticles spread between ～85 K and ～150 K, which is slightly modified by remanent tensile stresses in the case of nanoparticles in the matrix. The subsequent coating of the bare particles by silica produced no further change in hyperfine parameters, which indicates that this procedure does not modify magnetic properties of nanoparticles.     

Substituent effects in reduction-induced synthesis of <Emphasis Type="Italic">ansa</Emphasis>-titanocenes

Bis{(diphenylvinylsilyl)tetramethylcyclopentadienyl}titanium dichloride [TiCl₂{η⁵-C₅Me₄(SiPh₂CH=CH₂)}₂] (1) is reduced with a half molar equivalent of magnesium to the monochloride ([TiCl{η⁵-C₅Me₄(SiPh₂CH=CH₂)}₂] (2), whereas one molar equivalent of magnesium affords the titanocene [Ti{η⁵-C₅Me₄(SiPh₂CH=CH₂)}{η⁵:η²-C₅Me₄(SiPh₂CH=CH₂)}] (3) stabilized by η²-coordination of one of the two vinyl groups to titanium(II). In the presence of excess magnesium, the vinyl moieties of 3 undergo intramolecular coupling to afford the ansa-titanocene [Ti(η⁵:η⁵:η²-C₅Me₄SiPh₂CH=CHCH₂CH₂SiPh₂C₅Me₄)] (4) possessing the η²-coordinated double bond in lateral position of its ansa-chain. The symmetrical ansa-titanocene [Ti(η⁵:η⁵:η²-C₅Me₄SiPh₂CH₂CH=CHCH₂SiPh₂C₅Me₄)] (5) was not obtained although its DFT-calculated energy is only slightly higher than that of 4. It is considered that transient 5 gives rise to non-identified tar-like by-products which inherently accompany the formation of 4.     

Antiradical activity of Paulownia tomentosa (Scrophulariaceae) extracts

Paulownia tomentosa is a large indecidous tree planted mostly for its fast growing wood and decorative purposes. The tree is also used in traditional Chinese medicine. As a part of our study of natural polyphenols, the fruits of Paulownia tomentosa were extracted by EtOH and than subjected to liquid/liquid extraction. Fractions were analysed by TLC and HPLC to determine presence of phenolic substances. We identified and quantified acteoside (1) and isoacteoside (2) in the EtOAc and n-BuOH extracts; mimulone (3) and diplacone (4) in the MeOH extract. To determine the antiradical activity of extracts we used the anti DPPH and peroxynitrite assays. The activity was expressed as Trolox C equivalents, IC50 for DPPH scavenging and a time dependency course was established. The polyphenols content was determined; results were expressed as gallic acid equivalents. Using these methods we found the fractions of the n-BuOH, EtOAc and MeOH extracts that display antiradical activity, which could be exploited as potential pharmaceuticals.     

Synthesis and NMR characterization of the cis and trans isomers of [Pt(II)(N9-adeH)2(pz)2] and X-ray crystallography of the trans isomer

The reaction of tetrapyrazine Pt(II) with adenine under basic conditions yielded two products both disubstituted by adenine and bound in all cases to the N-9 nitrogen of adenine. Crystals amenable to X-crystallographic analysis were obtained for one product which was consequently identified as trans-[Pt(II)(N9-adeH)2(pz)2](NO3)(4).H2O. The other product, though, was identified as the cis isomer based on extensive and comparative NMR structural studies whereby the two compounds were examined as both neutral and tetraprotonated species in solution. The major product of the reaction was unexpectedly the cis isomer, thus obtained in contrast to the trans effect, and the reason for this result is speculated on. Computational calculations using DFT at the B3LYP/TZVP-MARI-J level of theory provided the head-to-tail conformer as the overwhelmingly more stable species over the head-to-head conformer for both compounds whilst the trans product was found to be more stable than the cis. Thus the reaction does not follow a thermodynamic course and rather is kinetically controlled in concert with the speculated mode of reaction.     

Isotachophoretic determination of hydrosulfite and metabisulfite in technical samples

A method for determination of metabisulfite and hydrosulfite in poultice and decolorant by isotachophoresis was developed. Metabisulfite and hydrosulfite are ionizable oxoanions of sulfur of similar character that can easily be oxidized to sulfates. To protect the analytes from oxidation the solid samples were dissolved in a 1% (w/v) solution of formaldehyde. Hydrosulfite and metabisulfite present in the samples were transformed by the reaction with formaldehyde to stable compounds, hydroxymethanesulfinate and hydroxymethanesulfonate that were determined isotachophoretically without any pretreatment except for sample filtering and degassing. A capillary of 0.4 mm i.d. and 100 mm effective length made of fluorinated ethylene-propylene copolymer was filled with an electrolyte system consisting of 10 mmol L⁻¹ HCl + 11 mmol L⁻¹ imidazole, 0.15% (w/v) hydroxyethylcellulose, pH 6.0 (leading electrolyte) and 5 mmol L⁻¹ benzoic acid + 6 mmol L⁻¹ imidazole, pH 6.5 (terminating electrolyte). Separation was performed at a driving current of 80 μA and for detection current was decreased to 30 μA. Using contactless conductivity detection, the calibration curves in the tested concentration range up to 2.5 mmol L⁻¹ were linear for both metabisulfite and hydrosulfite complexes. The concentration detection limits for metabisulfite and hydrosulfite were 2.9 and 3.4 μmol L⁻¹, respectively. For 1 mmol L⁻¹ concentration, values of R.S.D. (n = 6) were 2.6% for hydrosulfite and 0.8% for metabisulfite. Isotachophoretic determination took about 20 min. The elaborated isotachophoretic procedure is simple to perform, sufficiently sensitive and accurate. In addition to this, low cost of analyses makes the method an alternative procedure to methods used so far for the determination of oxoanions of sulfur.     

Capillary electrophoresis mass spectrometry coupling with immobilized enzyme electrospray capillaries

Open tubular capillary enzyme reactors were studied for rapid protein digestion and possible on-line integration into a CE/ESI/MS system. The need to minimize the time of the analyte molecules to diffuse towards the surface immobilized enzyme and to maximize the surface-to-volume (S/V) ratio of the open tubular reactors dictated the use of very narrow bore capillaries. Extremely small protein amounts (atto-femtomoles loaded) could be digested with enzymes immobilized directly on the inside wall of a 10 microm I.D. capillary. Covalently immobilized L-1-tosylamido-2-phenylethyl chloromethyl ketone (TPCK)-trypsin and pepsin A were tested for the surface immobilization. The enzymatic activity was characterized in the flow-through mode with on-line coupling to electrospray ionization-time of flight-mass spectrometer (ESI/TOF-MS) under a range of protein concentrations, buffer pH's, temperatures and reaction times. The optimized reactors were tested as the nanospray needles for fast identification of proteins using CE-ESI/TOF-MS.