Size exclusion chromatographic characterization of sodium hyaluronate fractions prepared by high energetic sonication

Summary A high molecular weight sodium hyaluronate isolated from rooster combs was degraded by ultrasonication. High-performance size exclusion chromatography allowed rapid and accurate determination of molecular weight parameters (M_z, M_w, M_n) and distributions. The time dependence of hyaluronan ultrasonication to the molecular characteristics of the polymer was investigated. A non-random nature of the degradation process was demonstrated and the reciprocal M_n value was found to be linearly proportional to the time of ultrasonication.     

Expedient Diels-Alder assembly of 4-aryl-4-phenylsulfonyl cyclohexanones

The efficient preparation of 4-aryl-4-phenylsulfonyl cyclohexanones, containing a quaternary sulfone-bearing carbon centre, is described. Their synthesis proceeds in 38-78% overall yield by way of three steps: (i) sulfinate alkylation; (ii) methylenation; and (iii) regioselective Diels-Alder condensation with 2-trimethylsiloxybutadiene. The scope and limitations of the one-pot Mannich-type methylenation described were examined.     

Thermal decomposition of mineral zircon by alkali metal hydroxides

Thermal decomposition of zircon mineral was studied in the presence of sodium and potassium hydroxides and in the presence of a waste mixture of hydroxides containing NaOH and KOH in a weight ratio of 23. The process was controlled in such a way that the decomposition products might contain the minimum possible amount of alkali and could thus be applied for the syntheses of zircon pigments without any further exacting treatment.

---

Zusammenfassung Es wurde die thermische Zersetzung eines Zirkonminerals in Gegenwart von Natrium- und Kaliumhydroxid-sowie in Gegenwart einer Altlauge mit einem Gehalt an NaOH und KOH im Verhältnis zwei zu drei untersucht. Der Prozeß wird derart gesteuert, daß die Zersetzungsprodukte einen möglichst geringen Anteil an Lauge besitzen und so ohne weitere arbeitsaufwändige Behandlungen zur Synthese von Zirkonpigmenten verwendet werden können.

---

, 23. , , , - .

     

Sulfide ion electrooxidation catalysed by cobalt phthalocyanine microcrystals

Electrooxidation of sulfide ion catalysed by microcrystals of cobalt phthalocyanine was investigated by cyclic voltammetry in 0.5M KNO₃ at pH 9.22. Traces of catalyst were immobilized at the surface of a paraffin-impregnated graphite electrode by the mechanical transfer of its powder. The electro-oxidation of HS^– proceeds in two irreversible steps, with the first peak between 0 V and –0.12 V and the second at 0.17 V. The first step is second order in HS^– and its product is the adsorbed disulfide, which may further dissociate to give adsorbed sulfur atoms. The reduction of sulfur occurs at –0.1 V.     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Summary. Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

Correlation between Lipophilicity of the Ligands and the Hepatobiliary Properties of the Radiopharmaceuticals: Approach to the Development of New IDA Derivatives

The partition coefficient (log P) for n-octanol/water system was calculated applying PACO program for various theoretically possible mono and dihalogenated IDA derivatives. Some of the synthesized ligands (SOLCOIODIDA, IODIDA and DIIODIDA) were labeled with the technetium-99m. The biodistribution and influence of bilirubin on their biokinetics were investigated in rats. The correlation between partition coefficients of ligands increase (log P) and better hepatobiliary properties of ^99mTc-IDA derivatives was determined. The values of log P increase from 1.16 for SOLCOIODIDA, 3.11 for IODIDA to 3.47 for DIIODIDA. In correlation with these results, biliary excretion decreased for 59% for ^99mTc-SOLCOIODIDA and 11% for ^99mTc-IODIDA and ^99mTc-DIIODIDA under hyperbilirubinemia (3.5 min after injection) and 45%, 11% and 0.38% respectively (15 min after injection). The highest biliary excretion had ^99mTc-DIIODIDA (55.4% for 3.5 min). Considering the correlation between hepatobiliary properties and log P, the evaluation of biological properties for various trifluoromethyl mono and dihalogenated IDA derivatives was performed on the basis of the calculated log P in order to synthetize a new radiopharmaceutical for hepatobiliary scintigraphy.     

Liquid chromatography of benzene derivatives on a porous methacrylate copolymer containing epoxy groups

Summary The retention of benzene derivatives with nonpolar and polar substituents on a porous methacrylate copolymer containing epoxy groups using both nonpolar and polar eluents was investigated. When n-hexane is used as the eluent, the retention of n-alkylbenzenes and polymethylbenzenes is weaker than that of benzene. In the case of benzene derivatives containing polar functional groups their capacity ratios (k) on this porous polymer increases approximately linearly with the increase of the adsorbate molecules dipole moment. The retention characteristics of the methacrylate copolymer were compared with that of a styrene-divinylbenzene copolymer and silica gels with a hydroxylated surface and with a surface modified by chemically bonded alkylsilyl groups.     

Chromatography in biomedical sciences

Chromatographic methods are the most popular ones used in biomedical sciences. However, their full potential as investigative and diagnostic tools in this important area is only now being realized.     

Influence of the pyridine methyl substituent position on the chemical changes of the NCS groups in the thermal decomposition of coordination compounds of the type Cu(NCS)2L2

The influence of the position of the CH₃ group in picoline and lutidine ligands on the degree of chemical change of the NCS groups in coordination compounds of the type Cu(NCS)₂L₂ (whereL=2-, 3- and 4-picoline, and 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-lutidine) is dealt with. The most marked effect of the CH₃ group is found to be exerted in position 4. This effect of the methyl group on the degree of chemical change points to the mutual influence of the ligands in coordination compounds of Cu(II).

---

Zusammenfassung Der Artikel befaßt sich mit dem Einfluß der Lage der CH₃ Gruppe in Pikolinen und Lutidinen als Liganden auf den Grad der chemischen Änderungen der Gruppen NSC in Koordinationsverbindungen des Typs Cu(NCS)₂L₂ (L=2-, 3- und 4-Pikoline, 2,3-, 2,4-, 2,5-, 2,6-, 3,4- und 3,5-Lutidine). Der ausgeprägteste Effekt der CH₃ Gruppe wurde in der Position 4 beobachtet. Dieser Einfluß der Methylgruppe auf das Ausmaß der chemischen Änderungen deutet auch auf die gegenseitige Wirkung der Liganden in Koordinationsverbindungen von Cu(II).

---

Résumé L'article a trait à l'influence de la position du groupe CH₂ dans les picolines et lutidines, en tant que ligands, sur le degré des changements chimiques des groupes SCN dans les composés de coordination du type Cu(SCN)₂L₂ (L=2-, 3 et 4-picoline, 2,3-, 2,4-,2,5-, 2,6-, 3,4- et 3,6-lutidine). L'effet le plus prononcé du groupe CH₃ s'observe en position 4. Cette influence du groupe méthyle sur le degré des changements chimiques indique aussi l'influence mutuelle des ligands dans les composés de coordination du Cu(II).

---

- , , NCS Cu(NCS)₂,L₂, L=2-, 3- 4- , 2.3-, 2.4-, 2.5-, 2.6-, 3.4- 3.5-. , 4. Cu(II).

     

Effect of carbon black on the thermal properties and flammability of cis-1,4-polyisoprene vulcanizates

The effect of carbon black with various particle sizes and specific surfaces on the thermal properties of the sulphur vulcanizates ofcis-1,4-polyisoprene was studied by means of thermal analysis. It was found that the addition of carbon black does not change the nature of the thermal processes in isoprene rubber vulcanizates essentially, but it distincly affects the positions of the peaks recorded in the DTA curves. The specific surface of carbon black affects the temperature of the first exothermic process and the temperature and rate of destruction of cross-linked polyisoprene. The presence of carbon black brings about a reduction in the flammability ofcis-1,4-polyisoprene vulcanizates. The specific surface of carbon black influences the value of the oxygen index OI.

---

Zusammenfassung Mittels Thermoanalyse wurde der Einfluß von Ruß mit unterschiedlicher Partikelgröße und unterschiedlicher spezifischer Oberfläche auf die thermischen Eigenschaften von Schwefelvulkanisaten von cis-1,4-Polyisopren untersucht. Es wurde festgestellt, daß die Zugabe von Ruß die thermischen Vorgänge in Isoprengummivulkanisaten nicht wesentlich verändert, daß jedoch die Lage der in den DTA-Kurven aufgezeichneten Peaks eindeutig beeinflußt wird. Die spezifische Oberfläche von Ruß beeinflußt die Temperatur des ersten exothermen Vorganges sowie Temperatur und Geschwindigkeit von Abbau des vernetzten Polyisoprenes. Die Gegenwart von Ruß führt eine Verminderung der Entflammbarkeit voncis-1,4-Polyisopren-Vulkanisaten herbei. Die spezifische Oberfläche von Ruß beeinflußt den Wert der Sauerstoffzahl.