Synthesis and application of ortho-palladated complex of (4-phenylbenzoylmethylene)triphenylphosphorane as a highly active catalyst in the Suzuki cross-coupling reaction

The ortho-metallated complex [Pd(μ-Cl){κ₂(C,C)-[C₆H₄(PPh₂CHC(O)C₆H₄-Ph-4)}]₂ (2a) was prepared by refluxing of Pd(OAc)₂ and {(Ph)₃PCHCOC₆H₄-Ph-4} (PhBPPY) of in CH₂Cl₂ followed by addition of an excess of KCl in MeOH Complex (2a) reacts with triphenylphosphine to give the mononuclear derivative [Pd(Cl)(PhC₆H₄COCHPPh₂C₆H₄)(PPh₃)] (3a) whose crystal structure has been determined by single crystal X-ray diffraction. The Suzuki reactions of aryl bromides and chlorides of varying electron density using complex (3a) as an efficient catalyst were performed, giving the cross-coupling products in good to excellent yields.     

Pulsed Current Electrochemical Synthesis of Nickel Nanoclusters and Application as Catalyst for Hydrogen and Oxygen Revolution

The main objective of this research is to prepare nickel nanoparticles with more porous structure by the pulsed current electrochemical method. A nickel optimized nanopowder was synthesized by using nickel chloride (0.005 M) as precursor, silver nitrate as a nucleation agent (at 0.5% mole of nickel salt in the starting solution), polyvinyl pyrrolidone (PVP) as structure director (with PVP/Ni = 1.7 g/g), ammonia (2 M), and hydrazine as reduction agent (with Hydrazine/Ni = 16 g/g) by pulsed current of 58 mA cm⁻² with a frequency of 12 Hz. The morphology and particle size of each synthesized sample was studied by scanning electron microscopy (SEM). The obtained results showed that temperature has no considerable effect on the morphology and particle size of nickel nanopowder. The nickel nanopowder synthesized in optimum conditions has excellent uniform and a more porous structure including nanoclusters with a particle size of approximately 10–20 nm. The obtained results indicate that the pulsed current electrochemical method can be used as a confident and controllable method for the preparation of nickel nanoparticles. Optimized nickel nanoclusters were used as catalyst for hydrogen and oxygen revolutions. Cyclic Voltammetry results showed that the synthesized nanoclusters can facilitate hydrogen reduction and increase hydrogen and oxygen revolution rates.     

高效可回收催化剂In(OTf)_3用于无溶剂条件下Pechmann缩合反应(英文)

In(OTf)3 plays the role of a Lewis acid catalyst in the Pechmann condensation of phenols with β-ketoesters under solvent-free conditions to give coumarin derivatives. This novel and inexpensive method has advantages such as short reaction time, excellent product yields, and avoids the use of organic solvents in agreement with green chemistry principles. Catalyst loadings can be as low as 1 mol% to give high yields of the corresponding coumarins at 80 °C. The catalyst can be recovered after the reaction, and reused with only a slight decrease in the yield.     

Improved microwave-assisted catalyst-free synthesis of 9-aryl-5,9-dihydropyrimido[4,5-d][1,2,4]triazolo[1,5-a]pyrimidine-6,8(4H,7H)-dione derivatives

A green regioselective synthesis of some new and known 9-aryl-5,9-dihydropyrimido[4,5-d][1,2,4]triazolo[1,5-a]pyrimidine-6,8(4H,7H)-diones has been described via the microwave-assisted one-pot reaction of 3-amino-1H-1,2,4-triazoles, aromatic aldehydes and barbituric acids under solvent- and catalyst-free conditions. This operationally simple procedure is less laborious and provides a better scope than previously reported procedures.     

Glassy carbon electrode modified by new Copper(I) oxide nanocomposite for glucose detection: An electroanalysis study

The Glucose amount of human blood is very vital because in higher levels than allowed value the corporal biological system was hampered. Therefore, in this study, the Cu₂O was deposited on the reduced Graphene oxide (RGO) by polydopamin (PDA) as linker. The new RGO‐PDA‐Cu₂O nanocomposite was deposited on the glassy carbon electrode (GCE) surface after its characterization by UV–Visible, fourier transform infrared (FT‐IR), X‐ray diffraction (XRD), Energy‐dispersive X‐ray (EDX), transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM) techniques. The electroanalysis of the new electrode was investigated by the cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) methods. The obtained detection limit of glucose (Glu) showed that the deposited GCE by RGO‐PDA‐Cu₂O nanocomposite has a high potential for its diagnosis. In addition, this electrode was applied to the Glu detection as biosensor in real samples in order to utilize in commercial applications.     

Experimental investigation and modeling of thermal conductivity of CuO–water/EG nanofluid by FFBP-ANN and multiple regressions

The purpose of this study is to predict the thermal conductivity of copper oxide (CuO) nanofluid by using feed forward backpropagation artificial neural network (FFBP-ANN). Thermal conductivity of CuO nanofluid is measured experimentally using transient hot-wire technique in temperature range of 20–60 °C and in volume fractions of 0.00125, 0.0025, 0.005 and 0.01% for neural network training and modeling. In addition, in order to evaluate accuracy of modeling in predicting the coefficient of nanofluid thermal conductivity, indices of root-mean-square error, coefficient of determination (R ²) and mean absolute percentage error have been used. FFBP-ANN with two input parameters (volume fraction and nanofluid temperature) and one output parameter (nanofluid thermal conductivity) in addition to two hidden layers and one outer layer which purelin, logsig and tansig functions are used was considered as the most optimum structure for modeling with neuron number of 4–10–1. In this study, among common methods of theoretical modeling of nanofluid thermal conductivity, theoretical method of Maxwell and also multivariate linear regression model was used for explaining the importance of modeling and predicting the results using neural network. According to this research, the results of indices and predictions show high accuracy and certainty of ANN modeling in comparison with empirical results and theoretical models.     

Accelerated Heck reaction using ortho‐palladated complex with controlled microwave heating

Palladium‐catalyzed Heck couplings utilizing [Pd{C₆H₂(CH₂CH₂NH₂)‐(OMe)₂,3,4} (µ‐Br)]₂ palladacycle catalyst and microwave irradiation lead to formation of different coupling products. This complex is an active and efficient catalyst for the Heck reaction of aryl iodides, bromides and even less reactive chlorides. The cross‐coupled products were produced in excellent yields. The reaction time was reduced from hours to minutes and full conversion was achieved under microwave irradiation. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of Iron Nanoclusters by Pulsed Current Method

The main objective of this research is to prepare iron nanoclusters with more porous structure by the pulsed current electrochemical method. In this method, there are some effective parameters including; pulse amplitude (current amount), pulse frequency, iron salt concentration, sulfuric acid concentration and synthesis temperature, which were optimized by the “one at a time method”. An iron optimized nanopowder was synthesized by using iron sulfate (0.005 M) as precursor and silver nitrate as a nucleation agent (at 0.5% mole of iron sulfate in the starting solution) by pulsed current of 20 mA cm⁻² with a frequency of 14 Hz. The relative gravimetrical density was used as an optimizing parameter for iron nanoparticles synthesis. The morphology and particle size of each synthesized sample was studied by SEM, TEM and XRD. The iron nanopowder synthesized in the optimum conditions has excellent uniform and a more porous structure including nanoclusters with a particle size of approximately 20–40 nm. The obtained results indicate that the pulsed current electrochemical method can be used as a confident and controllable method for the preparation of iron nanoparticles. XRD, EDX and ICP-AES results showed that the iron nanoclusters can be synthesized with high purity by the proposed method.     

Synthesis of quinoxaline derivatives via condensation of aryl-1,2-diamines with 1,2-Diketones using (NH4)6Mo7O24.4H2O as an efficient, mild and reusable catalyst

Ammonium heptamolybdate tetrahydrate [(NH₄)₆Mo₇O₂₄.4H₂O] efficiently catalyzes the condensation of aryl-1,2-diamines with 1,2-diketones in EtOH/H₂O as a green media at room temperature to afford quinoxaline derivatives as biologically interesting compounds. Ease of recycling of the catalyst is one of the most advantages of the proposed method.