Dielectric properties of KDP-type ferroelectric crystals in the presence of external electric field

Considering external electric field as well as third- and fourth-order phonon anharmonic interaction terms in the pseudospin-lattice coupled mode (PLCM) model Hamiltonian for KDP-type ferroelectrics, expressions for field-dependent shift, width, renormalized soft mode frequency, Curie temperature, dielectric constant and dielectric loss are evaluated. For the calculation, method of statistical double-time temperature-dependent Green’s function has been used. By fitting model values of physical quantities, temperature and electric field dependences of soft mode frequency, dielectric constant and loss have been calculated which compare well with experimental results of Baumgartner [8] and Choi and Lockwood [9]. Both dielectric constant and loss decrease with electric field.     

Catalysis by Ir(III), Rh(III) and Pd(II) metal ions in the oxidation of organic compounds with H2O2

Catalytic activities of three transition metals, as iridium (III) chloride, rhodium (III) chloride and palladium (II) chloride, were compared in the oxidation of six aromatic aldehydes (benzaldehyde, p‐chloro benzaldehyde, p‐nitro benzaldehyde, m‐nitro benzaldehyde, p‐methoxy benzaldehyde and cinnamaldehyde), two hydrocarbons (viz. (anthracene and phenanthrene)) and one aromatic and one cyclic alcohol (cyclohexanol and benzyl alcohol) by 50% H₂O₂. The presence of traces (substrate: catalyst ratio equal to 1:62500 to 1:1961) of the chlorides of iridium(III), rhodium(III) and palladium(II) catalyze these oxidations, resulting in good to excellent yields. It was observed that in most of the cases palladium(II) chloride is the most efficient catalyst. Conditions for the highest and most economical yields were obtained. Deviation from the optimum conditions decreases the yields. Oxidation in aromatic aldehydes is selective at the aldehydeic group only and other groups remain unaffected. This new, simple and economical method, which is environmentally safe, also requires less time. Reactive species of catalysts, existing in the reaction mixture are also discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Thermal effects on parallel resonance energy of whistler mode wave

In this short communication, we have evaluated the effect of thermal velocity of the plasma particles on the energy of resonantly interacting energetic electrons with the propagating whistler mode waves as a function of wave frequency and L-value for the normal and disturbed magnetospheric conditions. During the disturbed conditions when the magnetosphere is depleted in electron density, the resonance energy of the electron enhances by an order of magnitude at higher latitudes, whereas the effect is small at low latitudes. An attempt is made to explain the enhanced wave activity observed during magnetic storm periods.     

HPTLC Determination of Swertiamarin and Amarogentin in Swertia Species from the Western Himalayas

JPC – Journal of Planar Chromatography – Modern TLC - A high-performance thin-layer chromatographic (HPTLC) method has been established for simple and rapid quantification of two...     

On the stability of the output characteristics of a grazing incidence grating dye laser transversely pumped by a copper vapor laser

The output characteristics of a high repetition rate pulsed dye laser has both short-term fluctuations and long-term drift. In high power high repetition rate lasers flow induced variations dominate over those due to other factors. In this paper it is shown by dye laser measurements that bandwidth fluctuations can be traced to the effective changes of the resonator dispersion due to fluctuations in the penetration depth of the pump beam in the dye medium. Short-term wavelength fluctuations can be traced to instantaneous deflection of the dye laser axis by the refractive index changes due to absorption of the pump beam. The fluctuations in both the bandwidth and the wavelength decreases with increasing flow rates within a laminar region. A copper vapor laser operating at 5.6 kHz repetition rate pumped the Rhodamine 6G dye laser used. The wavelength fluctuation of ±0.0035, 0.0030, 0.0004 nm and the bandwidth fluctuation of ±710, 132, 45 MHz over approx. 60 minutes were observed at 1.2, 3.7, 5.5 lpm flow rates respectively.     

Study of photon-induced L3 vacancy alignment for elements La to U

Alignment of photon-induced L₃ vacancies is studied in rare earth and highZ elements at energies of experimental interest, near thresholds to 60 keV, under nonrelativistic dipole approximation. Numerical calculations of the matrix element are undertaken to produce theoretical data for comparison with the experimental findings. The A₂ values being s>0.1 at photoelectron energies <20 keV are certainly higher than 5–8% uncertainties quoted in experimental results. Present findings are from a very basic model, hydrogen-like and can further be treated as reference to observe the impact of screening, relativistic, multipole and retardation corrections to the model     

N = 4 Supersymmetric (Dyonic) Hypermultiplets in String Theory

In four-dimensional N = 4 supersymmetric gauge theory, we obtain an exact metric on the moduli space of quantum vacua and analyze the spectra of BPS states in weak as well as in strong coupling regions. Identifying the hypermultiplet of the dyonic state as a string stretched between D₃-brane probe and a 7-brane, we demonstrate that the two hypermultiplets, which become massless at two singularities in supersymmetric theory, correspond to open strings beginning on the D₃-brane and ending on the respective 7-brane.     

Design and fabrication of fluid controlled dynamic optical lens system

A novel small fluid controlled optical lens system that is capable of displaying dynamic variation of its focal length and field-of-view (FOV) is designed and fabricated. In this active lens system, appropriate volume of the optical fluid can be pumped into or out of the lens chamber to provide double-convex (DCX) or double-concave (DCV) lens effect. Simple optical imaging experiments were performed using different sets of glass lenses with fixed focal lengths to determine the optimum lens configuration required for designing a dynamic optical lens system. The experimental results obtained from the glass lenses demonstrate that a combination of a single DCX lens with three DCV lenses provides a wider FOV. The flexible membranes for fluid controlled lenses were fabricated using polydimethylsiloxane polymer material, which has good optical transparency and elasticity. A simple fluid injection system is used to vary the radius of curvature of the lenses, and thereby to change the focal length. A dynamic optical lens system with a combination of one DCX and multiple variable focal length DCV lenses as designed here can image an object with a wide range of focal length and FOV. With this fluid controlled optical system, the FOV and focal length could be continuously varied and a maximum FOV of 118.3° could be achieved. The smallest f-number (f_/#) for this fluid controlled single lens system was found to be 1.3, which corresponds to the numerical aperture value of 0.35.