HL－1装置中LHCD和等离子体参数的关系

本文研究了在ＨＬ－１托卡马克的不同放电阶段的低混杂波驱动特性。给出了驱动电流及驱动效率和等离子体参数，如电子平均密度ｎｅ、等离子体电流Ｉｐ及纵向磁场的关系。也给出和分析了波驱动和入射波功率的关系。在放电平段，对正反向驱动效率进行了研究和比较。     

Studies of the kinetics of the reduction of chromate by glutathione and related thiols

The reduction of chromate by glutathione, its mono- and diethyl esters, -cysteine, 2-mercapto-propionic acid and mercapto-succinic acid has been studied. The empirical rate law k_obs = ab[Thiol]²/(1 + b[Thiol]) is obeyed by all of these thiols, at neutral pH. No evidence could be obtained for a first-order pathway in glutathione under these conditions. These observations are used to comment on the stability of intermediates potentially important in explaining chromate toxicity.     

Theory of main chain nematic polymers with spacers of varying degree of flexibility

Main chain liquid crystal polymers are modelled as either worms or jointed rods. In reality they are composed of mesogenic units (rods) linked by spacers with varying degrees of flexibility. We present a molecular model to describe non-homogeneous nematic polymers. The model takes account of molecular parameters, such as the lengths of the mesogenic group and the spacer units, and the interactions between them. The spacers are found to have an order differing from the mesogenic units. If the spacer is not very long and thus in effect is inflexible, one end of the spacer can retain to some extent the orientation of the other end, allowing orientational correlation between spacers mediated by the intermediate mesogenic unit. This is important in giving the chain a global rod-like behaviour as the nematic field becomes strong or the temperature low. The nematic order of the two components (mesogens and spacers), the nematic-isotropic transition as well as the latent entropy are examined. Furthermore, the anisotropic conformations of the polymers are investigated, which show either rod-like or random walk behaviour. Comparison of our results with experiment is found to be satisfactory.     

Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer

The laser cladding of Fe-based alloys on a medium carbon steel substrate was performed using a CO₂ laser and Ar shielding gas that was blown into a molten pool. The microstructure and cracking susceptibility of the laser-clad layers were studied in terms of carbon additions. Results show that the small change of the carbon content in the alloy powders can obviously change the microstructure and properties of the layers. When the carbon content is in the range of 0.3–0.4 wt.%, the decrease of the carbon content in alloy powders will increase the hardness and toughness of the layers simultaneously under the same process parameters. As a result, crack-free coatings with high hardness can be obtained. As the carbon content increases from 0.2 wt.% to 0.4 wt.%, the segregation ratio of chromium increases, while the segregation ratios of nickel, manganese, and silicon first decrease and then increase. At the same time, a new designing principle concerning the composition and microstructure has been put forward, and the principal mechanisms of strengthening and toughening of the layers are fine-grain strengthening and low carbon martensitic phase transformation strengthening.     

"全反射"与课堂教学素质化

素质教育的主阵地是课堂教学.如何切实做到物理教学素质化呢?下面结合“全反射”的教学,谈几点看法和做法.1 课堂教学目标构建的多元性 课堂教学强调目标构建的多元性,以完成教学多方位的艰巨任务,这是素质教育的重要教学特征之一.因而在制定具体的物理教学目标时,既要有知识、技能方面的要求,     

Effect of track stiffness on vibration levels in railway tunnels

The paper discusses the difficulties in comparing and drawing conclusions from vibration measurements made in different railway tunnels. A number of new measurements are presented, which have been made and analyzed on a consistent basis. The track stiffness has been determined for each of the measurements. Graphs are presented which indicate the level of rail and tunnel floor vibration likely to occur for different track stiffnesses. The variance in the measurement results also indicates the potential error in using the data to predict vibration levels in new situations.     

带作用的群系的临界结构

在本文中，我们讨论了带作用群的群系的临界结构，给出了处理允许某些作用群的群的问题的一般方法，作为应用，我们特别给出了关于幂零群及ｐ－幂零群的一些结果。     

Kinetics of phenyl radical reactions with propane,n‐butane,n‐hexane,and n‐octane: Reactivity of C6H5 toward the secondary C?H bond of alkanes

The kinetics of C₆H₅ reactions with n‐C_nH_2n+2 (n = 3, 4, 6, 8) have been studied by the pulsed laser photolysis/mass spectrometric method using C₆H₅COCH₃ as the phenyl precursor at temperatures between 494 and 1051 K. The rate constants were determined by kinetic modeling of the absolute yields of C₆H₆ at each temperature. Another major product C₆H₅CH₃ formed by the recombination of C₆H₅ and CH₃ could also be quantitatively modeled using the known rate constant for the reaction. A weighted least‐squares analysis of the four sets of data gave k (C₃H₈) = (1.96 ± 0.15) × 10¹¹ exp[?(1938 ± 56)/T], and k (n‐C₄H₁₀) = (2.65 ± 0.23) × 10¹¹ exp[?(1950 ± 55)/T] k (n‐C₆H₁₄) = (4.56 ± 0.21) × 10¹¹ exp[?(1735 ± 55)/T], and k (n?C₈H₁₈) = (4.31 ± 0.39) × 10¹¹ exp[?(1415 ± 65)T] cm³ mol^?1 s^?1 for the temperature range studied. For the butane and hexane reactions, we have also applied the CRDS technique to extend our temperature range down to 297 K; the results obtained by the decay of C₆H₅ with CRDS agree fully with those determined by absolute product yield measurements with PLP/MS. Weighted least‐squares analyses of these two sets of data gave rise to k (n?C₄H₁₀) = (2.70 ± 0.15) × 10¹¹ exp[?(1880 ± 127)/T] and k (n?C₆H₁₄) = (4.81 ± 0.30) × 10¹¹ exp[?(1780 ± 133)/T] cm³ mol^?1 s^?1 for the temperature range 297‐‐1046 K. From the absolute rate constants for the two larger molecular reactions (C₆H₅ + n‐C₆H₁₄ and n‐C₈H₁₈), we derived the rate constant for H‐abstraction from a secondary C? H bond, k_s?CH = (4.19 ± 0.24) × 10¹⁰ exp[?(1770 ± 48)/T] cm³ mol^?1 s^?1. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 36: 49–56, 2004     

Influence of Turbid Medium Parameters on Back Scattered Intensity and Pulsewidth of Picosecond Pulse

In this paper, we simulate a practical in vivo technique in which is produced influence of turbid medium parameters on backscattered intensity and pulsewidth of picosecond for turbid tissue surface of a semiinfinite medium by a small narrow linewidth laser beams. It is shown that the interaction of the ultra short pulse and the turbid tissue is very used as researching the optical parameters of the turbid medium.     

Analysis of transient wave scattering from an inclusion with an unilateral smoothly contact interface by BEM

Summary A 2D time-domain Boundary Element Method (BEM) is applied to solve the problem of transient scattering of plane waves by an inclusion with a unilateral smooth contact interface. The incident wave is assumed strong enough so that localized separations take place along the interface. The present problem is indeed a nonlinear boundary value problem since the mixed boundary conditions involve unknown intervals (separation and contact regions). In order to determine the unknown intervals, an iterative technique is developed. As an example, we consider the scattering of plane waves by the cross section of a circular cylinder embedded in an infinite solid. Numerical results for the near field solutions are presented. The distortion of the response waves and the variation of the interface states are discussed. The financial support by the China National Natural Science Foundation under Grant No. 19872001 and No. 59878004 is gratefully acknowledged. The second author is also grateful to the support of the National Science Fund for Distinguished Young Scholars under Grant No. 10025211.