Monitoring of safety features,fissile material accumulation and concentration in nuclear reprocessing by active and passive neutron counting techniques

The application, the advantage and limits of neutron monitoring techniques, such as Hf-monitors, fissile material accumulation and concentration monitors are being discussed. The active neutron counting technique applied to emptied pulsed extraction columns containing Hf-sieve plates allows conclusive answers as to the position of the plates in the columns. Pu-accumulations on Hf-sieve plates in pulsed extraction columns can be estimated within a factor of two, whereby the detection limit is about equal to or less than 1 g Pu/plate. Fissile material concentration changes of 1.1 g/l can be detected in the case of²³⁵U in solution and of 0.4 Pu/l if a²³⁹Pu/²⁴⁰Pu ratio of 4 to 1 is assumed.     

Local-moment and itinerant antiferromagnetism in the heavy-fermion system Ce(Cu1−xNix)2Ge2

Elastic and inelastic neutron-scattering studies on the system Ce(Cu_1?xNi_x)₂Ge₂ are reported. These measurements are complemented by measurements of the magnetic susceptibility, high-field magnetization, heat capacity, thermal expansion, electrical resistivity and thermopower. The results reveal an interesting T-x phase diagram consisting of two different antiferromagnetic phases for x < 0.2 and 0.2 < x < 0.75, respectively, and a heavy-Fermi-liquid regime at higher Ni concentrations. The experimental results are interpreted in terms of an alloying-induced transition from local-moment to itinerant heavy-fermion magnetism. Fingerprints of this latter phase are a strongly reduced ordered moment and a short incommensurate ordering wave vector, in accord with theoretical predictions. A surprisingly good agreement between theory and experiment is found for x > 0.5. Further experimental evidence for different types of antiferromagnetic ordering derives from a line-shape analysis of the quasielastic neutron-scattering intensity, from magnetization and thermopower experiments.     

Semiconductor waveguide directional couplers for coherent receivers

Optical waveguide 3-dB couplers integrated on semicondutors have been studied, designed and fabricated, using both bulk and diluted multi-quantum-well InGaAsP/InP-based materials, grown by MOCVD. The device structure is based on the two-mode interference (TMI) principle and is fully compatible for integration with the optoelectronic and electronic components of a coherent receiver. Bulk material couplers provide an output balanced within 0.05 dB per nanometer and an excess loss of 1.4 dB, compared to a straight guide, while coupling loss to a tapered-lensed single mode fibre is 4 dB.Improved coupling efficiency to single-mode fibres is achieved by use of moderately diluted multi-quantum-well waveguides, which include InGaAsP wells and InP barriers: coupling loss to a tapered-lensed single-mode fibre as low as 0.5 dB and excess loss of 1.8 dB are featured. Couplers fabricated with this waveguide structure have a balance sensitivity of 0.03 to 0.04 dB per nanometer.A moderately diluted multi-quantum-well 3-dB coupler has been permanently pigtailed and butt-coupled to a dual balanced PIN photoreceiver. This hybrid assembly was tested in a coherent transmission system at 155 and 622 Mbits^-1 showing sensitivities, for 10^-9 BER, of about-38.0 dBm and-28.8 dBm, respectively.     

The influence of synthetic conditions on the stability of methotrexate-monoclonal antibody conjugates determined by reversed phase high performance liquid chromatography.

Methotrexate (MTX) has been convalently attached to an IgG-type monoclonal antibody (791T/36) directed to tumour-associated antigen gp72. Conjugates were synthesized by the active ester method using MTX N-succinimidyl ester at various pH values (7.5-10.5). Following purification by gel filtration, high performance liquid chromatography was used to assess the free drug or its derivatives in samples of MTX-791T/36 conjugates previously treated (or not) with hydroxylamine. Quantitative analysis, performed on a reversed phase column (pore size 300 A) with isocratic acetonitrile-sodium acetate buffer (pH 4.8) as mobile phase, indicated no detectable amount of free methotrexate in hydroxylamine-treated conjugates even six months after their preparation. Similar observations were made with conjugates, whose synthesis were performed at pH greater than or equal to 10. In contrast, the presence of increasing amounts of drug/metabolite could be demonstrated in samples produced at lower pH values. Based on these findings, the pH-dependent kinetics of MTX release has been determined and used to design conditions under which stable MTX-791T/36 conjugates could be prepared without hydroxylamine reaction.     

Identification of metabolites of halofantrine, a new candidate anti-malarial drug, by gas chromatography-mass spectrometry.

Two previously unknown metabolites of halofantrine, a candidate anti-malarial drug, have been isolated by thin-layer chromatography from the plasma of dogs administered a single oral dose of 60 mg/kg. Their identifies were investigated after trimethylsilylation by gas chromatography-mass spectrometry under electron-impact and negative-ion chemical ionization conditions. The structural assignment was further confirmed by using a combination of elemental composition analysis of all the isotope peaks at low mass resolution and isotope pattern matching. These two metabolites were formed by modification of the dibutylaminopropyl side-chain of the parent compound involving deamination and oxidation or reduction.     

奇异P-Laplace方程存在正解的充分必要条件

讨论了一维奇异P-Laplace方程{φp（u′））′ f(t,u)=0,t∈（0,1)；u(0=u(1)=0存在C^1[0，1]或C[0，1]正解的一个充分必要条件．用到的方法主要有上下解方法和Schaude，不动点定理．     

CRYSTAL STRUCTURE AND MORPHOLOGY OF NASCENT SAMPLES OF SYMMETRIC AROMATIC POLYESTERS——Ⅱ. POLY(p-PHENYLENE 2,6-NAPHTHALATE)

Confined thin film melt polymerization (CTFMP) of naphthalene chloride/hydroquinone (NCMQ, 1/1, molar)mixtures at polymerization temperatures (T_p) below ca. 300℃ resulted in relatively thick, elongated crystals. Polymerizationof NC/HQ above 300℃ between glass yielded well-formed lamellar crystals ca. 100 A thick. Phase Ⅰ and Ⅱ [001] EDpatterns were obtained for all T_p, the relative amount of phase Ⅰ increasing with T_p. Polymerization of naphthalenedicarboxylic acid/hydroquinione diacetate 1/1 mixtures at high T_p also yielded lamellar crystals that "curled up" off of thesubstrate. When the high temperature CTFMP polymerization was conducted between mica, aggregates of lamellae on-edgedeveloped but epitaxial growth did not occur. Epitaxial growth of lamellae between mica could be obtained, however, byconfined thin film solution polymerization, with both of the latter samples yielding apparently related ED patterns from adifferent unit cell than phase Ⅰ or Ⅱ. Fiber patterns, obtained from sheared samples, indicated considerably greater crystaldisorder than in the nascent crystals. Refinement of the phase Ⅰ unit cell parameters, based on the [001] and [01 1] EDpatterns, with modeling based on Cerius~2, suggests a monoclinic phase Ⅰ unit cell with a = 7.76, b = 5.71, c = 14.99 A, α = γ= 90°, β= 99.7°, ρ = 1.47 g/cm~3, space group P12_1/al.