Biomolecules-carbon nanotubes doped conducting polymer nanocomposites and their sensor application

A simple method for preparing bio-functionalized soluble single-walled carbon nanotubes (SWNTs) is described. Different proteins such as bovine serum albumin (BSA), cytochrome c and horseradish peroxidase (HRP) were used to solubilize low functionality SWNTs in water aided by sonication. The unbound proteins were removed by column chromatography and the SWNT-protein conjugate was used as the sole anionic dopant in electropolymerization of polypyrrole from polymerization solution at pH above the isoelectric point of the protein to provide a negative charge. The morphology of the polypyrrole with SWNT-protein dopant was found to be three-dimensional and fibrous with wide open interlocking pores in contrast to smooth and cauliflower-like for chloride doped polypyrrole. Enhanced sensor performance was demonstrated for hydrogen peroxide detection on polypyrrole/SWCNT-HRP nanocomposites modified electrode. Such nanocomposites can be potentially applied for other biosensor and bio-fuel cell applications.     

A Tandem In Situ Peptide Cyclization through Trifluoroacetic Acid Cleavage

We present a new approach for peptide cyclization during solid phase synthesis under highly acidic conditions. Our approach involves simultaneous in situ deprotection, cyclization and trifluoroacetic acid (TFA) cleavage of the peptide, which is achieved by forming an amide bond between a lysine side chain and a succinic acid linker at the peptide N‐terminus. The reaction proceeds via a highly active succinimide intermediate, which was isolated and characterized. The structure of a model cyclic peptide was solved by NMR spectroscopy. Theoretical calculations support the proposed mechanism of cyclization. Our new methodology is applicable for the formation of macrocycles in solid‐phase synthesis of peptides and organic molecules.     

Coherence characteristics of light-emitting diodes

We report the measurement of coherence characteristics of light-emitting diodes (LEDs). Experiments were performed using red and green color LEDs directly illuminating the Young's double slit kept in the far-zone. Fourier transform fringe analysis technique was used for the measurement of the visibility of interference fringes from which the modulus of degree of spectral coherence was determined. Low degree of spectral coherence, typically 0.4 for red and 0.2 for green LED with double-slit separation of 400 μm was observed. A variable slit was then kept in front of the LEDs and the double slit was illuminated with the light coming out of the slit. Experiments were performed with various slit sizes and the visibility of the interference fringes was observed. It was found that visibility of the interference fringes changes drastically in presence of variable slit kept in front of LEDs and a high degree of spectral coherence, typically 0.85 for red and 0.8 for green LED with double-slit separation of 400 μm and rectangular slit opening of 500 μm was observed. The experimental results are compared with the theoretical counterparts. Coherence lengths of both the LEDs were also determined and it was obtained 5.8±2 and 24±4 μm for green and red LEDs, respectively.     

Shape evolution in odd-A 137 Pm

The odd mass nucleus ¹³⁷Pm has been studied to high spins through the ¹⁰⁹Ag(³²S, 2p2n)¹³⁷Pm reaction at an incident beam energy of 150 MeV. The de-exciting ??-rays were detected using an array of 18 Compton suppressed clover detectors. The level scheme of ¹³⁷Pm has been extended up to $J^\pi = \tfrac{{43}} {2}^ -$ and excitation energy of E _x ? 6 MeV with the observation of 42 new gamma transitions. The linear polarization (IPDCO) measurements for the ??-ray transitions have been done for the first time. The spin and parity assignments for most of the reported levels have been made using these results and the coincidence angular anisotropy (R_DCO) measurements. The nuclear shape evolution is discussed in the light of Total Routhian Surface (TRS) and Cranked Shell Model (CSM) calculations.     

Implementation of anti-reflection coating to enhance light out-coupling in organic light-emitting devices

We report significant enhancement of light out-coupling in organic light-emitting devices (OLEDs) by means of anti-reflection coating of magnesium fluoride (MgF₂) on the backside of glass substrate. OLEDs were fabricated by employing the green electrophosphorescent material fac tris-(2-phenylpyridine) iridium [Ir(ppy)₃] doped in 4,4′,8-N,N-8-dicarbazole-biphenyl (CBP) and 0.4 wt% tetrafluorotetracyano-quinodimethane (F4-TCNQ)-doped naphthylphenylbiphenyl diamine (α-NPD) as hole transport layer (HTL). Single-layer MgF₂ with the thickness of λ/4 was then vacuum deposited on the backside of glass substrate of OLED. About two-fold enhancement in luminance with anti-reflection coating of MgF₂ has been observed.     

Evidence of Dynamical Fluctuation of Target Residues in Relativistic Nuclear Interaction at 14.5 AGeV

An analysis of data of target fragments of ²⁸Si-AgBr (at 14.5 AGeV) reveals the existence of emission asymmetry in the azimuthal plane, which is found to depend on the number of target fragments. The comparison with the data of ³²S-AgBr (at 200 AGeV) and ¹⁶O-AgBr (at 60 AGeV) interactions indicates that emission asymmetry depends on the projectile mass and energy.