Design and analysis of a BLPC vocoder-based adaptive feedback cancellation with probe noise

The band-limited linear predictive coding (BLPC) vocoder-based adaptive feedback cancellation (AFC) removes the high-frequency bias, while the low frequency bias persists between the desired input signal and the loudspeaker signal in the estimate of the feedback path. In this paper, we present a BLPC vocoder-based adaptive feedback canceller with probe noise with an objective of reducing the low-frequency bias in digital hearing-aids. A step-wise mathematical analysis of the proposed feedback canceller is presented employing the recursive least square and normalized least mean square adaptive algorithms. It is observed that the optimal solution of the feedback path is unbiased for an unshaped probe noise, but is biased for a shaped probe signal; the bias term does not consist of correlation between the desired input and the loudspeaker output. The identifiability conditions are analysed and it is shown that a delay, greater than or equal to the length of the adaptive filter, must be introduced in the forward path to achieve an unbiased feedback path estimate. Algorithm analysis and computer simulations presented in this paper justify the reason for selecting the proposed design over the existing BLPC vocoder-based feedback cancellation algorithm.     

Steric-controlled excimer formation in naphthalene analogues of chalcone

Naphthalene analogues of chalcone (typical vinylarenes) are well known for their intramolecular charge transfer (CT) process. The all four possible isomers NC1, NC2, NC3 and NC4 were observed to give structure-less broad CT bands, whereas, excimer formation at higher concentration was reported only for NC4 [Res. Chem. Intermed. 25 (1999) 903]. However, conventional GMMX calculation data reveals that the naphthalene portion of all the isomers are planar, hence, excimer emission is expected from all of them, i.e., if NC4 can form an excimer, then the rests are also capable of doing it. In this paper we have actually succeeded in resolving the excimer peaks for all these four isomers by optimization of concentration, though the extent of excimer formation was observed to be the maximum for NC4. These differential tendencies of excimer formation can be explained by the change in extent of intermolecular stacking interaction of the naphthalene moieties. Variation occurs here due to steric perturbation arising from the specific orientation of the near resident non-planar aroyl component with respect to the naphthalene moiety.     

Ion Interactions with a New Ditopic Naphthalimide‐Based Receptor: A Photophysical,NMR and Theoretical (DFT) Study

A new multi‐component chemosensor system comprising a naphthalimide moiety as fluorophore is designed and developed to investigate receptor–analyte binding interactions in the presence of metal and non‐metal ions. A dimethylamino moiety is utilized as receptor for metal ions and a thiourea receptor, having acidic protons, for binding anions. The system is characterized by conventional analytical methods. The absorption and fluorescence spectra of the system consist of a broad band typical for an intramolecular charge transfer (ICT). The effects of various metal‐ion additives on the spectral behavior of the present sensor system are examined in acetonitrile. It is found that among the metal ions studied, alkali/alkaline earth‐metal ions and transition‐metal ions modulate the absorption and fluorescence spectra of the system. As an additional feature, the anion signaling behavior of the system in acetonitrile is studied. A decrease in fluorescence efficiency of the system is observed upon addition of fluoride and acetate anions. Fluorescence quenching is most effective in the case of fluoride ions. This is attributed to the enhancement of the photoinduced electron transfer from the anion receptor to the fluorophore moiety. Hydrogen‐bond interactions between the acidic NH protons of the thiourea moiety and the F^? anions are primarily attributed to the fluoride‐selective signaling behavior. Interestingly, a negative cooperativity for the binding event is observed when the interactions of the system are studied in the presence of both Zn²⁺ and F^? ions. NMR spectroscopy and theoretical calculations are also carried out to better understand the receptor–analyte binding.     

Photosensitization of nanoparticulate TiO2 using a Re(I)-polypyridyl complex: studies on interfacial electron transfer in the ultrafast time domain

We have synthesized a new photoactive rhenium(i)-complex having a pendant catechol functionality [Re(CO)(3)Cl(L)] (1) (L is 4-[2-(4'-methyl-2,2'-bipyridinyl-4-yl)vinyl]benzene-1,2-diol) for studying the dynamics of the interfacial electron transfer between nanoparticulate TiO(2) and the photoexcited states of this Re(i)-complex using femtosecond transient absorption spectroscopy. Our steady state absorption studies revealed that complex 1 can bind strongly to TiO(2) surfaces through the catechol functionality with the formation of a charge transfer (CT) complex, which has been confirmed by the appearance of a new red-shifted CT band. The longer wavelength absorption band for 1, bound to TiO(2) through the proposed catecholate functionality, could also be explained based on the DFT calculations. Dynamics of the interfacial electron transfer between 1 and TiO(2) nanoparticles was investigated by studying kinetics at various wavelengths in the visible and near infrared regions. Electron injection into the conduction band of the nanoparticulate TiO(2) was confirmed by detection of the conduction band electron in TiO(2) ([e(-)](TiO(2)(CB))) and the cation radical of the adsorbed dye (1˙(+)) in real time as monitored by transient absorption spectroscopy. A single exponential and pulse-width limited (<100 fs) electron injection was observed. Back electron transfer dynamics was determined by monitoring the decay kinetics of 1˙(+) and .     

A 3D mammalian cell separator biochip

The dissimilar cytoskeletal architecture in diverse cell types induces a difference in their deformability that presents a viable approach to separate cells in a non-invasive manner. We report on the design and fabrication of a robust and scalable device capable of separating a heterogeneous population of cells with variable degree of deformability into enriched populations with deformability above a certain threshold. The three dimensional device was fabricated in fused silica by femtosecond laser direct writing combined with selective chemical etching. The separator device was evaluated using promyelocytic HL60 cells. Using flow rates as large as 167 μL min(-1), throughputs of up to 2800 cells min(-1) were achieved at the device output. A fluorescence-activated cell sorting (FACS) viability analysis on the cells revealed 81% of the population maintain cellular integrity after passage through the device.     

Synthesis of zinc oxide porous structures by anodization with water as an electrolyte

We report a simple, reliable and one-step method of synthesizing ZnO porous structures at room temperature by anodization of zinc (Zn) sheet with water as an electrolyte and graphite as a counter electrode. We observed that the de-ionized (DI) water used in the experiment is slightly acidic (pH=5.8), which is due to the dissolution of carbon dioxide from the atmosphere forming carbonic acid. Porous ZnO is characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy and photoluminescence (PL) studies. The current-transient measurement is carried out using a Gamry Instruments Reference 3000 and the thickness of the deposited films is measured using a Dektak surface profilometer. The PL, Raman and X-ray photoelectron spectroscopy are used to confirm the presence of ZnO phase. We have demonstrated that the hybrid structures of ZnO and poly (3,4-ethylenedioxythiophene):poly (styrene sulfonate) (PEDOT:PSS) exhibit good rectifying characteristics. The evaluated barrier height and the ideality factor are 0.45 eV and 3.6, respectively.     

The striking influence of SWNT-COOH on self-assembled gelation

A miniscule amount of f-SWNTs remarkably improved (~17-fold) the gelation efficiency of amphiphilic molecules by triggering the formation of interconnecting self-assembled fibrillar networks (SAFIN) in supramolecular gelation.     

Synthesis of a 2,2'-bipyridyl functionalized oligovinylene-phenylene using Heck and Horner-Wadsworth-Emmons reactions and X-ray crystal structure of E-(4-(4-bromostyryl)phenyl)(methyl)sulfane

The synthesis of a new 2,2'-bipyridyl functionalized oligovinylenephenylene (OVP-5) containing a methyl protected thiol using Heck coupling and the Horner-Wadsworth-Emmons reaction and is described. A key step involving a diisopropylcarbodiimide promoted dehydration of a stable β-hydroxyphosphonate intermediate was identified. The structure of precursor E-(4-(4-bromostyryl)phenyl)(methyl)sulfane was determined using X-ray crystallography.     

Electrochemical coupling of mono and dihalopyridines catalyzed by nickel complex in undivided cell

One step nickel-catalyzed electroreductive homocoupling among 2-bromopicolines and 2-bromopyridine has been investigated by our group in an undivided cell and using zinc or iron as sacrificial anode. In this work, it was developed mono and dihalopyridines coupling to obtain possible products from heterocoupling. A series of reactions were carried out in order to develop a synthetic method for the preparation of unsymmetrical 2,2′-bipyridines and 2,2′:6′,2″-terpyridines. Statistical yields (50%) were observed for 2-bromopyridines/2-bromo-6-methylpyridine heterocoupling. In a preliminary study devoted to terpyridines preparation, good results were obtained for 2,6-dihalopyridines homocoupling, affording 2,6-dichloro-2,2′-bipyridine (46%) and 2,6-dibromo-2,2′-bipyridine (56%), at controlled reaction time. At major reaction time, it was observed that the direct electroreduction of the 2,6′-dihalo-2,2′-bipyridines intermediates and 2,6″-dihalo-2,2′:6′,2″-terpyridines products on the cathode surface. A reasonable isolated product yield of 6,6″-dimethyl-2,2′:6′,2″-terpyridine (10%) was only observed in the reaction between 2,6-dichloropyridine and 2-bromo-6-methylpyridine (1:2).