Effect of LiClO4 on the radical polymerization of Di-2-[2-(2-methoxyethoxy)ethoxy]ethyl itaconate

The effect of LiClO₄ on the polymerization of di-2-[2-(2-methoxyethoxy)ethoxy]ethyl itaconate (DMEI) with dimethyl 2,2′-azobisisobutyrate (MAIB) was investigated in methyl ethyl ketone (MEK) kinetically and by ESR. The polymerization rate (R_p) at 50°C, where the concentrations of DMEI and MAIB were 1.00 and 5.00 × 10⁻² mol/L, increased with increasing [LiClO₄]. Marked acceleration was observed at higher [LiClO₄]s than 1.0 mol/L. The molecular weight of resulting polymer (ca. 10,000) was relatively insensitive to [LiClO₄], indicating occurrence of chain transfer. IR analysis of mixtures of LiClO₄/DMEI and LiClO₄/poly(DMEI) indicated complexation of LiClO₄ with DMEI and its polymer. The rate constants of propagation (k_p) and termination (k_t) were determined by ESR. k_p (1.7–10.5 L/mol s at 50°C) increased with [LiClO₄]. k_t (5.2–1.0 × 10⁴ L/mol s at 50°C) showed remarkable decrease at higher [LiClO₄]s than 1.0 mol/L. R_p of polymerization of equimolar complex of LiClO₄/DMEI with MAIB at 50°C in MEK was expressed by R_p = k[MAIB]^0.5[DMEI]^2.4. k_p increased and k_t decreased with [DMEI]. The activation energies of overall polymerization, propagation and termination were estimated to be 34.5, 8.0, and 59.4 kJ/mol. Copolymerization of DMEI with styrene was also profoundly affected by the presence of LiClO₄. Such large effects of LiClO₄ on the homo- and copolymerization of DMEI are explicable in term of association of LiClO₄-complexed DMEI monomers. © 1997 John Wiley & Sons, Inc.     

Non-Toxic Dimeric Peptides Derived from the Bothropstoxin-I Are Potent SARS-CoV-2 and Papain-like Protease Inhibitors

The COVID-19 outbreak has rapidly spread on a global scale, affecting the economy and public health systems throughout the world. In recent years, peptide-based therapeutics have been widely studied and developed to treat infectious diseases, including viral infections. Herein, the antiviral effects of the lysine linked dimer des-Cys¹¹, Lys¹²,Lys¹³-(pBthTX-I)₂K ((pBthTX-I)₂K)) and derivatives against SARS-CoV-2 are reported. The lead peptide (pBthTX-I)₂K and derivatives showed attractive inhibitory activities against SARS-CoV-2 (EC₅₀ = 28–65 µM) and mostly low cytotoxic effect (CC₅₀ > 100 µM). To shed light on the mechanism of action underlying the peptides’ antiviral activity, the Main Protease (M^pro) and Papain-Like protease (PL^pro) inhibitory activities of the peptides were assessed. The synthetic peptides showed PL^pro inhibition potencies (IC₅₀s = 1.0–3.5 µM) and binding affinities (K_d = 0.9–7 µM) at the low micromolar range but poor inhibitory activity against M^pro (IC₅₀ > 10 µM). The modeled binding mode of a representative peptide of the series indicated that the compound blocked the entry of the PL^pro substrate toward the protease catalytic cleft. Our findings indicated that non-toxic dimeric peptides derived from the Bothropstoxin-I have attractive cellular and enzymatic inhibitory activities, thereby suggesting that they are promising prototypes for the discovery and development of new drugs against SARS-CoV-2 infection.     

In situ FTIR studies of primary intermediates of photocatalytic reactions on nanocrystalline TiO2 films in contact with aqueous solutions

Multiple internal reflection infrared spectroscopy was applied to in situ investigations of surface intermediates of photocatalytic reactions on nanocrystalline TiO(2) films in contact with aqueous solutions. UV irradiation in the presence of dissolved O(2) caused the appearance of new bands peaked at 943, 838, and 1250-1120 cm(-)(1) together with intensity changes in other bands. Investigations of influences of the solution pH, the presence or absence of hole and electron scavengers, and isotopic H(2)O --> D(2)O exchange on the spectral changes have revealed that the primary step of photocatalytic O(2) reduction is the formation of the surface peroxo species, Ti(O(2)), giving the 943 cm(-)(1) band, probably with the surface superoxo species, TiOO., as a precursor, in neutral and acidic solutions. The surface peroxo species is then transformed to the surface hydroperoxo, TiOOH, giving the 838 and 1250-1120 cm(-)(1) bands, by protonation in the dark. This is, to our knowledge, the first direct in situ spectroscopic detection of primary intermediates for the photocatalytic O(2) reduction in aqueous solutions. On the basis of the assignment, a possible reaction scheme for various processes of the photocatalytic O(2) reduction is proposed, which is in harmony with other spectral changes induced by the UV irradiation.     

A synthesis of chiral 1,1,3-trisubstituted 1,2,3,4-tetrahydro-beta-carbolines by the Pictet-Spengler reaction of tryptophan and ketones: conversion of (1R,3S)-diastereomers into their (1S,3S)-counterparts by scission of the C(1)-N(2) bond

The Pictet-Spengler cyclization of the imines (3) prepared by the condensation of L-tryptophan methyl ester (1) and aryl methyl ketones (2), using titanium(IV) isopropoxide as an iminating reagent, quantitatively proceeded, when treated with trifluoroacetic acid (TFA) or formic acid, to provide two diastereomers, that is (1S,3S)-1-aryl-3-isopropoxycarbonyl-1-methyl-1,2,3,4-tetrahydro-beta-carbolines (4) and their (1R,3S)-diastereomers (5), of which the diastereomer ratios varied from 1 to 5 depending on the reaction conditions. The (1R,3S)-diastereomers (5) are thermodynamically more stable than their (1S,3S)-congeners (4), as shown by equilibration experiments in TFA. The conversion of 4 to 5 (also 5 to 4) should occur under acidic conditions by cleavage of the C(1)-N(2) bond with complete retention of configuration at the C-3 chiral center. The low diastereo-selectivity observed in the Pictet-Spengler reaction of 1 and 2 is concluded to be a stereochemical outcome under conditions of kinetic control (lower temperature, shorter reaction time), while the high diastereo selectivity with preferential formation of the more stable isomer (5) is the result of thermodynamically controlled experiments (higher temperature, longer reaction time).     

Development of rectangular column structured titanium oxide photocatalysts anchored on silica sheets by a wet process

Commercially available powdered photocatalysts such as P-25 are known to show high photocatalytic performance. However, in practical use, their anchoring onto a substrate without any binders is still very difficult. The purpose of this study is to design and develop high-performance photocatalysts that can be anchored onto a substrate, and to this end we have prepared a titanium oxide photocatalyst using a wet process. The results of this study led to the successful development of rectangular column structured titanium oxide crystals which could be anchored onto silica sheets. The rectangular columnar crystal was 100- 500 nm wide and 1000- 5000 nm long. Moreover, investigations on the complete oxidation reaction of acetaldehyde into CO₂ and H₂O showed a high performance equivalent to that of the most efficient marketed powdered photocatalysts.     

(−)-Daucic acid: Proof of -lyxo configuration, synthesis of its -ribo, -xylo, -arabino and -lyxo analogs, and biosynthetic implications

The dimethyl esters of the 2,6-anhydro-3-deoxy-hept-2-enaric acids with -xylo, -lyxo, -arabino, -lyxo- and -ribo-configuration were synthesized from -galactose and -mannose, respectively, and further characterized by their di-O-acetyl and di-O-benzoyl derivatives. Comparison of their physical data with those of Daucus carota derived products revealed (−)-daucic acid to have -lyxo-configuration 46 rather than the previously assigned -xylo stereochemistry 1. Dimethyl daucate 43 could be converted by acid-induced ring contraction and dehydration into naturally occurring (+)-osbeckic acid 47, thereby proving its (S)-configuration. Configurational identity in the pyranoid rings of (−)-daucic acid and KDO, together with available biosynthetic evidence on chelidonic acid 4, a leaf closing factor, suggests a joint, KDO 8-P-based pathway for their biosynthesis in plants.     

Crystalline orientation of the InN films prepared by atmospheric pressure halide chemical vapor deposition

The structural analysis of the hexagonal InN film prepared on a Si(100) substrate by the AP-HCVD technique using InCl₃ and NH₃ as starting materials were carried out by the X-ray pole figure analysis. The deposited films consist of the hexagonal InN pillar crystals. It was found that the pillar crystals, which have random rotation around the 100 axis, were grown at an angle of 70–90° to the substrate.     

Characterization of p-aminobenzamidine-based sorbent and its use for high-performance affinity chromatography of trypsin-like proteases

An affinity sorbent, hydrophilic polymer-based carrier of different pore size (Toyopearl) with immobilized p-aminobenzamidine (ABA), has been prepared. Its basic properties and some applications for protein purification were studied. ABA, which is a synthetic inhibitor for trypsin-like proteases, was covalently immobilized to Toyopearl by reductive amination. The ligand density and binding capacity for porcine trypsin varied depending on the pore size of Toyopearl. The maximum binding capacity of the immobilized p-aminobenzamidine Toyopearl (ABA-Toyopearl) for trypsin was more than 40 mg/ml gel. ABA-Toyopearl thus obtained was very stable below pH 8 and was successfully used for high-performance affinity chromatography of trypsin-like proteases such as trypsin, thrombin, tissue-type plasminogen activator or urokinase in a single step at 25 degrees C.     

Effect of lipid composition on phospholipase A2-catalyzed membrane leakage in immobilized liposomes: sensitization for polychlorinated biphenyls detection with antibody affinity column tandem with fluorescent liposome column

Phospholipase A(2) (PLA(2))-catalyzed membrane leakage can be detected by immobilized liposomes containing a self-quenching fluorescent dye, calcein, on an open column using off-line analysis with a fluorescent spectrophotometer. The calcein release was found to be affected by the pH value, incubation time, and liposome compositions. The fluorescent signal from the negatively charged liposomes hydrolyzed by PLA(2) was 5 times higher than that from neutral liposomes. We utilized this enzymatic reaction to amplify signal to detect polychlorinated biphenyls (PCBs). To achieve this goal, we conjugated an analogue of PCB, 3,4-dichloroaniline, to PLA(2). The competitive immunoreaction between the 3,4-dichloroaniline-PLA(2) conjugate and PCB samples on the anti-PCB antibody column caused the release of the bound PLA(2) conjugates in proportion to the PCB concentration. The released PLA(2) conjugates was then passed through the tandem fluorescent liposome column causing release of fluorescent dye from the liposomes. Therefore, the signal of immunocompetitive assay was amplified on the fluorescent liposome column. The tandem column system achieves a high sensitivity by detecting the PCB concentration as low as 0.5 ng/mL in less than 20 min. It has great potential in detecting other pollutants, and has been used for sensitive immunoassays.     

Synthesis of disubstituted cucurbit[6]uril and its rotaxane derivative

Synthesis of diphenyl cucurbit[6]uril (CB[6]) has been achieved via co-oligomerization of diphenyl glycoluril and unsubstituted glycoluril. The unsymmetrically substituted CB[6], Ph(2)CB[6], was further converted to a rotaxane incorporating bis(dinitrophenyl)spermine. [reaction: see text]