Lanthanide/zinc centered photoactive hybrids with functional sulfonamide linkage: Coordination bonding assembly,characterization and photophysical properties

In this paper, two novel kinds of organic–inorganic monomer, SUA-APEMS and SUA-APS, have been achieved by modifying 5-sulfosalicylic acid (SUA) with 3-aminopropyl-methyl-diethoxylsilane (APEMS) and 3-aminopropyl trimethoxysilane (APS). These two organic–inorganic monomers were used as multi-functional bridged components, which can coordinate to metal ions (Tb³⁺/Eu³⁺/Zn²⁺) with carbonyl groups, strongly absorb ultraviolet and effectively transfer energy to metal ions through their triplet excited state, as well as involve in the sol–gel process with inorganic host precursor tetraethoxysilane (TEOS), resulting two series of molecular hybrid materials (named as SUA-APEMS/APS-RE) with double chemical bond (RE(Zn)–O coordination bond and Si–O covalent bond). The effective intra-molecular energy transfer process gives rise to the characteristic emission of metal ions and the chemical bond make the hybrid materials owning better properties.     

Step‐Mediated Anisotropic Adsorption and Condensation of tert‐Butylamine on Cu(111)

Scanning tunneling microscopy (STM) combined with density functional theory (DFT) calculations were applied in studying the anisotropic adsorption and condensation of tert‐butylamine (t‐BA) molecules in the vicinity of the steps on the Cu(111) surface. The preferential adsorption at the upper step edges and uneven distribution of t‐BA in the vicinity of the steps illustrate the asymmetric electronic structure of the surface steps. Our observation demonstrates that the adsorption and diffusion of a polar molecule would be significantly mediated by steps on metal surfaces due to the molecule–step interaction and the intermolecular interactions.     

Silver Coated Platinum Core–Shell Nanostructures on Etched Si Nanowires: Atomic Layer Deposition (ALD) Processing and Application in SERS

A new method to prepare plasmonically active noble metal nanostructures on large surface area silicon nanowires (SiNWs) mediated by atomic layer deposition (ALD) technology has successfully been demonstrated for applications of surface‐enhanced Raman spectroscopy (SERS)‐based sensing. As host material for the plasmonically active nanostructures we use dense single‐crystalline SiNWs with diameters of less than 100 nm as obtained by a wet chemical etching method based on silver nitrate and hydrofluoric acid solutions. The SERS active metal nanoparticles/islands are made from silver (Ag) shells as deposited by autometallography on the core nanoislands made from platinum (Pt) that can easily be deposited by ALD in the form of nanoislands covering the SiNW surfaces in a controlled way. The density of the plasmonically inactive Pt islands as well as the thickness of noble metal Ag shell are two key factors determining the magnitude of the SERS signal enhancement and sensitivity of detection. The optimized Ag coated Pt islands on SiNWs exhibit great potential for ultrasensitive molecular sensing in terms of high SERS signal enhancement ability, good stability and reproducibility. The plasmonic activity of the core‐shell Pt//Ag system that will be experimentally realized in this paper as an example was demonstrated in numerical finite element simulations as well as experimentally in Raman measurements of SERS activity of a highly diluted model dye molecule. The morphology and structure of the core‐shell Pt//Ag nanoparticles on SiNW surfaces were investigated by scanning‐ and transmission electron microscopy. Optimized core–shell nanoparticle geometries for maximum Raman signal enhancement is discussed essentially based on the finite element modeling.     

Efficient isolation and purification of five products from microbial biotransformation of cinobufagin by high‐speed counter‐current chromatography

An efficient separation method of using high‐speed counter‐current chromatography was successfully established to directly purify cytotoxic transformed products of cinobufagin by Cordyceps militaris. The two‐phase solvent system composed of n‐hexane–ethyl acetate–methanol–water (4:6:3:4, v/v) was used in high‐speed counter‐current chromatography. A total of 9 mg of 4β,12α‐dihydroxyl‐cinobufagin ( 1 ), 15 mg of 12β‐hydroxyl‐cinobufagin ( 2 ), 8 mg of 5β‐hydroxyl‐cinobufagin ( 3 ), 12 mg of deacetylcinobufagin ( 4 ) and 6 mg of 3‐keto‐cinobufagin ( 5 ) were obtained in a one‐step separation from 400 mg of the crude extract with purity of 98.7, 97.2, 90.6, 99.1 and 99.4%, respectively, as determined by HPLC. Their chemical structures were identified on the basis of ¹H‐NMR and ¹³C‐NMR technology. All products ( 1 – 5 ) showed the potent activities against human carcinoma cervicis (Hela) and malignant melanoma (A375) cells in vitro.     

Characterization of gold nanorods in vivo by integrated analytical techniques: their uptake, retention, and chemical forms

Integrated analytical techniques were used to study the tissue distribution and structural information of gold nanorods (Au NRs) in Sprague-Dawley rats through tail intravenous injection. Before in vivo experiments were conducted, careful characterization of Au NRs was performed. The zeta potential proved that adsorption of bovine serum albumin on Au NRs turned the surface charges from positive to negative as in an in vitro simulation. The biodistribution of Au NRs was investigated quantitatively by inductively coupled plasma mass spectrometry at different time points after injection. As target tissues, both liver and spleen were chosen to further demonstrate the intracellular localization of Au NRs by the combination of transmission electron microscopy and energy-dispersive X-ray spectroscopy. Moreover, synchrotron-radiation-based X-ray absorption spectroscopy was employed and it was observed that long-term retention of Au NRs in liver and spleen did not induce obvious changes in the oxidation states of gold. Therefore, the present systematic method can provide important information about the fates of Au NRs in vivo and can also be extended to study the biological effects of other metallic nanomaterials in the future.      

Quantitative coherence analysis with an X-ray Talbot–Lau interferometer

Differential phase-contrast (DPC) X-ray imaging has been performed in the Talbot–Lau configuration, in which the X-ray source was a combination of an absorption grating and a laboratory X-ray generator. We report here quantitative analysis of partial coherence effects on the X-ray Talbot–Lau interferometer. Based on the visibility of the self-image, the well-known geometry condition is reproduced. It is shown that effects of partial coherence are determined by the opening ratio of the source grating, and that the effects are independent of the Talbot order and the type of the phase grating, a condition quite different from those in a Talbot interferometer. A possible explanation is discussed from the point of view of the effective spatial coherence length. Taking into account the available X-ray flux and experimental fluctuations, we present the optimum opening ratio. Furthermore, we mention that our results can also be successfully used to discuss the properties of a multiline X-ray source.     

Adsorptive desulfurization on a heteroatoms Y zeolite prepared by secondary synthesis

Gallium atoms have been introduced into the framework of Y zeolite by treating the zeolite with an aqueous solution of ammonium hexafluoro gallate.Desulfurization of various model fuels containing about 500 μg/g sulfur has been studied over the synthesized Y zeolite(GaAlY).The sulfur adsorption capacity is 7.0,17.4,14.5,16.9,6.9 and 5.8 mg(S)/g adsorbent for thiophene,tetrahydrothiophene(THT),4,6-dimethyldibenzothiophene(4,6-DMDBT),dibenzophiophene(DBT),benzothiophene(BT) and 4-methyldibenzothiophene(4-MDBT...     

An ice‐like water hexamer with symmetry in the hydrogen‐bonded structure of 2,3,5,6‐tetrafluoro‐1,4‐bis(imidazol‐1‐ylmethyl)benzene dihydrate

An ice‐like hexameric water cluster, stabilized by the flexible bis‐imidazolyl compound 2,3,5,6‐tetrafluoro‐1,4‐bis(imidazol‐1‐ylmethyl)benzene (Fbix), is found in the trigonal R crystal structure of the title compound, C₁₄H₁₀F₄N₄·2H₂O or Fbix·2H₂O. The Fbix molecule lies about an inversion centre with one water molecule in the asymmetric unit in a general position. A cyclic chair‐like hexameric water cluster with symmetry is generated with a hydrogen‐bonded O...O distance within the hexamer of 2.786 (3) Å. The Fbix molecule adopts a trans conformation, where the imidazole ring makes a dihedral angle of 70.24 (11)° with the central tetrafluorinated aromatic ring. Each water hexamer is connected by six Fbix molecules through intermolecular O—H...N hydrogen bonds [N...O = 2.868 (3) Å] to yield a three‐dimensional supramolecular network with primitive cubic (pcu) topology. Large voids in each single pcu network lead to fourfold interpenetrated aggregates of Fbix·2H₂O.     

Ni/MH电池过充电过程热效应分析

论文采用二维热模型分析了圆柱型Ni/MH电池在过充电过程中的热效应.实验提供了更为精准的数据以建立精确的热模型.利用石英频率微量热仪对电池的热容量以及电池在不同电流过充电时的发热量和散热速率进行了测量,继而将散热速率曲线拟合成线性函数和三段不同的指数函数.线性阶段之后的散热过程符合数学微分表达式,这些表达式有助于理解过渡阶段和过充电阶段散热速率的变化规律.热传导方程中产热速率采用理论计算值.最后使用FEM模拟了电池在1C,3C,5C充电过程每一阶段末时刻的电池内部温度场分布,结果相对准确.