Comparative analysis of blue‐shifted hydrogen bond versus conventional hydrogen bond in methyl radical complexes

Methyl radical complexes H₃C…HCN and H₃C…HNC have been investigated at the UMP2(full)/aug‐cc‐pVTZ level to elucidate the nature of hydrogen bonds. To better understand the intermolecular H‐bond interactions, topological analysis of electron density at bond critical points (BCP) is executed using Bader's atoms‐in‐molecules (AIM) theory. Natural bond orbital (NBO) analysis has also been performed to study the orbital interactions and change of hybridization. Theoretical calculations show that there is no essential difference between the blue‐shift H‐bond and the conventional one. In H₃C…HNC complex, rehybridization is responsible for shortening of the N? H bond. The hyperconjugative interaction between the single electron of the methyl radical and N? H antibonding orbital is up to 7.0 kcal/mol, exceeding 3.0 kcal/mol, the upper limit of hyperconjugative n(Y)→σ*(X–H) interaction to form the blue‐shifted H‐bond according to Alabugin's theory. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

呋喃西林水溶液在光和热作用下的稳定性

The influence of both light and heat on the stability of nitrofurazone aqueous solution was studied. Results show that in either heating experiments or the exposure to light at high temperatures, the degradation rate obeyed zero-order kinetics. The total rate constant ktotal caused by both light and heat can be divided into two parts: ktotal =kdark klight, where kdark and klight are the degradation rate constants caused by heat and light, respectively. The klight can be expressed as klight=Alight*exp(-Ea,light/RT)*E, where E is the illuminance of light, and Alight and Ea,light both are experimental constants. The values of these kinetic parameters were determined based on the experiments in the dark and upon exposure to three different light sources. Results show that the values of Alight and Ea, light varied with the light source. To save time, labor, and drugs, exponential heating experiments were employed and compared with the isothermal experiments. Results indicated that kinetic parameters obtained by exponential heating experiments are comparable to those obtained by isothermal experiments either in the dark or upon exposure to light.     

聚合物 分散液晶体系的相分离结构对温度依赖性的研究

在不同温度下采用紫外光引发相分离法制备了聚合物分散液晶样品．用光学显微镜及扫描电镜研究了样品的相分离结构．采用对样品施加电压观察其微结构轮廓，或测量液晶微粒相变点的简单方法研究了聚合温度对相分离结果的影响．结果表明，在一定温度范围内，随着温度的增高，液晶微粒的平均尺寸趋于减小，而且形成的液晶微粒也逐渐变纯．作者给出了这些测试结果并进行了讨论．     

The molecular structure of chlorothiomethoxymethyl-bis(triphenylphosphine)palladium(II) methylenechloride solvate at −160°C

The precise molecular structure of [PdCl(CH₂SCH₃)(PPh₃)₂] has been determined from three-dimensional X-ray diffraction data collected at ?160°C. The CH₂Cl₂ solvated crystal ([PdCl(CH₂SCH₃)(PPh₃)₂ · CH₂Cl₂]) belongs to the monoclinic system, space group P2₁/n, with four formula units in a cell of dimensions: a 14.973(3), b 15.333(3), c 17.377(3) Å and β 115.77(1)° at ?160°C. The structure was solved by the conventional heavy atom method and refined by the least-squares procedure to R = 0.035 for observed reflections. The geometry around the palladium atom is square-planar. The phosphorus atoms of the two triphenylphosphine ligands are mutually trans. The CH₂SCH₃ group is bonded to the palladium atom only through the PdC σ-bond and the sulfur atom is not bonded to the metal atom (PdC(1) 2.061(3), SC(1) 1.796(3), SC(2) 1.817(5), Pd?S 2.973(1) Å, PdC(1)S 100.64(14)° and C(1)SC(2) 101.28(18)°). The structure is in contrast to that of [PdCl(CH₂SCH₃)(PPh₃)], in which both the carbon and sulfur atoms of the CH₂SCH₃ group are bonded to the palladium atom.     

On-line post-column fluorescence detection for N-terminal tyrosine-containing peptides in high-performance liquid chromatography

A detection system based on on-line post-column fluorescence derivatization is described for the determination of N-terminal tyrosine-containing peptides by reversed-phase high-performance liquid chromatography. The peptides are automatically converted into fluorescent derivatives by reaction with hydroxylamine, cobalt (II) and borate after peptide separation on a reversed-phase column (TSKgel ODS-120T) followed by passage through an ultraviolet absorbance detector. The reaction system permits the fluorescence detection at 435 nm (emission) with excitation at 335 nm for N-terminal tyrosine-containing synthetic peptides in as little as picomole amounts. The facile fluorescence detection of N-terminal tyrosine-containing fragments produced from methionine-enkephalin by enzymatic degradation using a rat brain homogenate was achieved by comparison with the ultraviolet absorption detection at 215 nm.     

掺硼多晶金刚石膜的电化学性能研究

采用EACVD(Electron Assisted Chemical Vapor Deposition)方法制备了掺硼金刚石膜, 并用扫描电镜、拉曼光谱及霍尔效应等测试方法对其表面形貌、生长特性、载流子浓度以及导电性能进行了分析. 测试结果表明, 掺硼金刚石膜是由微米级晶粒组成的多晶膜, 其载流子浓度为4.88×1020 cm-3, 电阻率为0.03 Ω·cm, 是高品质金刚石膜. 用该金刚石膜制作电化学电极, 利用循环伏安法分别测量了金刚石膜电极在氯化钾空白底液、亚铁氰化钾溶液和左旋半胱氨酸溶液中的循环伏安曲线, 发现该金刚石膜电极在水溶液中具有宽的电化学窗口(约为3.7 V)和接近零的背景电流, 在生物制剂的检测中具有很高的灵敏度和良好的稳定性, 是一种理想的电化学电极材料.     

TixNy团簇结构的密度泛函研究

采用杂化密度泛函方法(B3LYP)和有效核势基组预测了Ti_xN_y (x≤3, y≤2)团簇的结构及稳定性, 并分析了可能存在构型的电子结构. 结果表明Ti₂N中体系的自旋多重度由Ti原子决定. Ti₃N中随着N的配位数增加, N的负电荷增加, 平均每个Ti向N提供约0.3个电子. 从Ti₂N₂可能稳定构型分析, 成键数目越多, 能量上越有利, 且Ti—N键的数目的增加, 将削弱N—N间的成键.     

Study on the Binding Effect between Cordycepin and Calf Thymus DNA by Circular Dichroism

DNA works as hereditary material and plays vital role in life science. The study of the binding of small molecules complex to DNA has been the focus of intense investigation, owning to their stereo and sequence specific interaction with the double helix1-…     

Synthesis and characterization of well-defined poly(methyl methacrylate)/CaCO3/SiO2 three-component composite particles via reverse atom transfer radical polymerization

The attempt to prepare structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, via reverse atom transfer radical polymerization (ATRP), using 2-2′-azo-bis-isobutyronitrile as initiator and Cu(II) bromide as catalyst was reported. CaCO₃/SiO₂ two-component composite particles were first obtained through sol–gel method, and their morphology and surface element information were determined by transmission electron microscopy and X-ray photoelectron spectroscopy, respectively. The results indicate that the CaCO₃ was encapsulated by the obtained SiO₂. After being modified by silane coupling agent, the CaCO₃/SiO₂ composite particles copolymerized with methyl methacrylate (MMA) under standard reverse ATRP conditions to produce PMMA/CaCO₃/SiO₂ three-component composite particles. In the case concerned, first-order kinetic plots and linear increase of molecular weight (Mn) vs conversion and narrow molecular weight distribution for the graft polymer samples were observed. Furthermore, the gel permeation chromatography results illustrated that both the free PMMA chains from the solvent and the graft PMMA chains from the surface of CaCO₃/SiO₂ two-component composite particles were growing at the same rate. Characterizations of the PMMA-grafted CaCO₃/SiO₂ composite particles were done by Fourier transform infrared and thermogravimetric analysis. The results showed that the surface of the modified inorganic particles was grafted by the MMA and that the grafting percentage was about 8.7%.