Cross-section measurement for Ni（n,x）^58（m＋g）Co, Ni（n, x）^60mCo, Ni（n,x）^61Co and Ni（n,x）^62mCo reactions induced by neutrons around 14 MeV

The cross sections of Ni(n,x)~(58(m g))Co,Ni(n,x)~(60m)Co,Ni(n,x)~(61)Co and Ni(n,x)~(62m)Co reactions induced by neutrons around 14 MeV were measured in this work and calculated by a previously developed formula in this work.The neutron flux was determined using the monitor reaction ~(27)Al(n,α)~(24)Na and the neutron energies were measured with the method of cross-section ratios for ~(90)Zr(n,2n)~(89)Zr to ~(93)Nb(n,2n)~(92m)Nb reactions.     

全内反射型大模式面积光子晶体光纤设计

利用平面波展开法对全内反射型光子晶体光纤的模场分布进行了理论分析和数值模拟,发现通过改变光纤包层结构能够改变模场分布和色散特性,并且利用其特有的"无截止单模"特性,设计了大模式面积光子晶体光纤     

Optimized Second Harmonic Generation of Femtosecond Pulse by Phase-Blanking Effect in Aperiodically Optical Superlattice

In order to minimize the effect of the unconsidered frequency components on the generated compression pulse, the phasing-blanking effect is taken into account of designing the one~dimensionai aperiodic domain reversal structure. Hierarchic genetic algorithm for the design of a domain reversal grating to modulate the spectrum and phase of the generated SH pulse simultaneously are presented. Our simulation shows that the quality of an output pulse is fairly improved.     

BEPCII Injector Linac Upgrade and Beam Instabilities

The upgrade project of the Beijing Electron Positron Collider （BEPCII） and its injector linac is working well. The linac upgrade aims at a higher injection rate of 5OmA/min into the storage ring, which requires an injected beam with low emittance, low energy spread and high beam orbit and energy stabilities. This goal is finally reached recently by upgrading the linac components and by dealing with rich and practical beam physics, which are described in this study.     

晶界内耗研究的新进展

由不同取向差的纯Al双晶的内耗实验观察到，不同类型晶界的弛豫参量有明屁差别。用耦合模型对内耗数据的分析表明，小角度晶界内耗的基本机制是位错攀移，而大角度晶界内耗的基本机制是晶界扩散。在此基础上，对多晶中晶界内耗的一些特征也作了解释。     

宽带膜厚实时监控过程中膜层折射率的确定方法

为了准确计算出镀膜过程中每层膜的折射率，介绍了实时监控过程中确定膜层折射率的2种方法：一种是由实测的透射比光谱直接反算出膜层的折射率；另一种是用最小二乘法的优化算法实时拟合折射率。试验结果表明：在线反算适合单点监控，所得折射率误差小于2%。然而在实际镀膜过程中,由于宽带内膜层参数误差较大,一般大于25%。为此，采用最小二乘法拟合，即在整个宽光谱范围内采集每个波长点的信息，所得结果误差很小，一般都在2％～5%之间,有时可达到10%,在很大程度上提高了实际镀膜时膜厚监控的精度。     

多光子电离下醇类团簇中的反应

应用Nd:YAG(Spectra-Physics LAB-170)脉冲激光器输出的355nm紫外激光实现了对甲醇、乙醇及正丙醇的多光子电离,对每一种样品通过质谱技术都观测到了两个质子化团簇离子系列:(R..3OH)nH 和(R1,2,3OH)n(H2O)H (R1,2,3代表CH2、CH2CH2及CH2CH3CH2),结合在HF/STO-3G和B3LYP/6-31G 水平上的从头计算对其反应通道做了分析,发现其产生经过了团簇内部的质子转移反应及离子-分子反应,且质子主要来自于羟基上的氢离子.并结合从头算分析了(R1,2,3OH)nH 的结构,给出了幻数团簇(R1,2,3OH)3H 的构型.同时对(R1,2,3)n(H2O)H 系列只在n值较大时出现做了相应的解释.     

532nm丙酮和丁酮多光子电离解离研究

利用激光质谱法,通过分析丙酮和丁酮的多光子电离飞行时间质谱,对其532nm多光子电离机制进行了研究. 结果发现丙酮相干吸收若干光子跃迁到高能超激发态,再继续吸收光子产生各种碎片离子,而丁酮先解离后电离. 两质谱中都有质荷比为4、6、8的离子,原则上是高价离子,但在相似条件下未见相关报道,因此对离子出险原因及确认尚待进一步研究. 实验中丁酮发生异构现象,其异构体电离解离出较强的C2H3O+(m/e=43).丙酮没有相关离子产生.     

卫星干涉多光谱图像压缩新算法

根据卫星干涉多光谱图像的成像特性,提出一种基于分类权值率失真优化截取和自适应编码深度控制的部分SPIHT光谱图像压缩算法.首先根据干涉区域类型和编码平面的重要性,对各棵零树各个编码过程赋予不同的重要性权值,然后采用部分SPIHT算法对每棵零树独立编码,编码时根据比特平面层中重要系数的统计概率自适应地进行3种编码模式的选择,同时依据重要性权值和深度控制因子自适应地控制每棵零树的编码深度,最后在编码深度内,根据不同干涉区域的零树对恢复光谱的失真贡献,采用分类权值率失真方法对码流进行优化截取,使码流分配与失真达成最优.实验结果表明,本算法比传统算法更好地保护了光谱信息.     

He+H2+→HeH++H反应的从头算势能面

运用多参考组态相互作用(MRCI)方法及aug-cc-pv5z基组构造了HeH+2体系基态(12A′)从头算势能面.采用多体展开法共拟合了8840个能量点,拟合误差为0.0677 Kcal/mol.基于新势能面,采用准经典轨线方法计算了碰撞能在0～2 eV范围内的积分反应截面,计算结果与实验结果符合较好.