Plutonium Activity Ratios in Plankton: New Evidence of Hold-Up Time in Irish Sea Sediments

The determination of activity ratios for radioisotopes of different half-lives can be used to estimate transit times from a point source to locations further away. For conservative elements, this time is approximately equivalent to the net hydrological transport. However, for non-conservative elements such as plutonium, the additional influence of biogeochemical processes decreases the net transport time. In this study, ²⁴¹Pu and ^239,240Pu concentrations in Irish Sea plankton samples, collected in May 1994, were determined and the ²⁴¹Pu/^239,240Pu ratios calculated. Plutonium-239,240 was measured using a standard method by ion exchange chromatography and alpha counting, and ²⁴¹Pu was determined by liquid scintillation counting using the disk-supported technique. The latter showed some methodological problems, which are briefly discussed. The ²⁴¹Pu/^239,240Pu ratios gave an estimate of the "transit time" from Sellafield to the different sampling points. In fact, this time represents the age of plutonium in plankton, i.e., the time lag between release from Sellafield and detection at the different sampling stations. The mean plutonium age was 17±2 years (n = 10) and 18.6±0.8 years (n = 13) in phytoplankton and zooplankton, respectively. The spatial distribution was reasonably homogeneous over the Irish Sea. The assimilation-elimination processes of plutonium in plankton are rather rapid. Therefore, it may be assumed that, in this time scale, the plutonium concentrations were in equilibrium with surrounding waters. Thus, it is concluded that plutonium was rather old because resuspension-sedimentation processes had occurred that delayed its transport within the Irish Sea. Therefore, the age of plutonium in plankton represented the hold-up time of plutonium in the sediments from the Irish Sea.     

Umpolung of the allylpalladium reactivity: mechanism and regioselectivity of the electrophilic attack on bis-allylpalladium complexes formed in palladium-catalyzed transformations

The structure and reactivity of various bis-allylpalladium complexes occurring as catalytic intermediates in important synthetic transformations have been studied by applying density functional theory at the B3PW91(DZ + P) level. It was found that n1,n3 coordinated bis-allylpalladium complexes are readily formed from the corresponding n3,n3 complexes, especially in the presence of pi-acceptor phosphine ligands. The theoretical calculations indicate dsigma-->pi type hyperconjugative interactions occurring in the n1-coordinated allyl moiety of the n3,n3 coordinated complexes. These hyperconjugative interactions influence the structure of the complexes and dramatically increase the reactivity of the double bond in the n1-moiety. The DFT results indicate a remarkably low activation barrier for the electrophilic attack on the n1-allyl functionality. In bridged n1,n3 complexes, the electrophilic attack occurs with a very high regioselectivity, which can be explained on the basis of d-pi type hyperconjugative interactions.     

Palladium-induced cyclizations for the synthesis of cis-2,5-disubstituted-3-methylenetetrahydrofurans: studies of the C7-C22 core of amphidinolide K

[formula: see text] The diastereoselective synthesis of cis-2,5-disubstituted-3-methylenetetrahydrofurans via Pd(0)-catalyzed cyclization of 2-methylene-1,4-diols is described. Investigations into the scope of the reaction and its application toward the synthesis of amphidinolide K is reported.     

Differential scanning calorimetry of semiconducting As-Se glasses containing Sb

The compositional dependence of the glass transition temperature (T _g), and the temperature of the maximum rate of crystallization (T _p) of As-Se glasses containing Sb has been measured using non-isothermal DSC. The variation of these characteristic temperatures is found useful in interpreting the structural changes in As-Sb-Se glasses. The role of Sb in these glasses and its effect on the crystallization characteristics is analyzed.     

Zur Umsetzung des 3,4,5,6-Tetrahydro-6-hydroxy-4,4,6-trimethyl-1,3-thiazin-2-thions mit sekundären Aminen

Tetrahydro-6-hydroxy-trimethyl-1,3-thiazine-2-thione (1) reacts with secondary amines via the dialkylammonium-3-oxoalkyldithiocarbamate3, either via isothiocyanates6 to 4-dialkylaminodihydro-2(1H)-pyridinethiones7 or to dialkylammonium dithiocarbamates (13), depending on the amine used and the reaction conditions. Subsequently, 6-dialkylaminotetrahydro-1,3-thiazine-2-thiones11 or tetrahydro-6-mercapto-1,3-thiazine-2-thione10 are formed. On being heated to reflux,11 reacts to pyridinethione7 and 4-dialkylaminodihydrothiopyranthione19. With secondary amines only13 is formed from tetrahydro-6-hydroxytetramethyl-1,3-thiazine-2-thione20. The reaction of dihydrotrimethyl-1,3-thiazine-2-thione21 with secondary amines leads to N,N-dialkylthioureas16 or dialkylammonium thiocyanates17 and with dialkylformamides 4-dialkylaminodihydropyridinethiones7 are formed. Dihydrotetramethyl-1,3-thiazine-2-thione24 reacts neither with secondary amines nor with dialkylformamides.     

Koordinationschemie von Dinitroresorcin mit Kupfer-, Kobalt-, Nickel-, Eisen- und Zinksalzen

The reactions of the bidentate dinitrosoresorcinol (DNR) with copper, cobalt, nickel, iron and zinc salts were investigated. This ligand was found to react with these metal salts in aqueous media where hydrogen ion was confirmed to be liberated except in case of iron. The solid complexes were prepared in alcoholic media. Chemical analyses, magnetic and spectral data were compatible to determine the structure of these complexes and their mode of chelation.

---

---

Mit 2 Abbildungen     

Microstructure determination of poly-(1,3-pentadiene) by a combination of infrared, 60-MHz NMR, 300-MHz NMR,and X-ray diffraction spectroscopy

A quantitative procedure has been developed for characterizing the complete microstructure of polymers of 1,3-pentadiene, including the tacticity of any crystalline component. This can be accomplished by a combination of infrared spectroscopy, X-ray crystallinity, and 300-MHz NMR spectroscopy. A series of high structural purity polymers were synthesized with a series of previously unreported mixed microstructures. These samples were characterized by using the three techniques mentioned, including the previously unreported 300-MHz NMR data. With those results a 60-MHz NMR/IR method of spectroscopy was developed to determine the composition of poly(1,3-pentadiene)s in terms of percent cis-1,2-, cis-1,4-, trans-1,4-, and 3,4-pentadiene units.     

Die Anwendung des Derivatographen zur Gleichzeitigen Dilatometrischen und Differential-Thermischen Analyse von Gläsern

Simultaneous DTA and dilatometric measurements were made and the derivatives of the dilatometric curves were taken for three glasses by means of a derivatograph. Glass blocks were used as test pieces with a boring for the thermoelement. A maximum was observed in the rate of length change, which can be explained by overheating phenomena. A comparison with DTA curves of glass powders published by Yamamoto showed that the break points in the DTA curves of glass blocks do not coincide with the Tg points, but under identical conditions they can serve for the rapid characterization of the transformation range.     

Studies in the furan series

A study was made of certain transformations of the bicyclic compounds of the fur an series synthesized from 3,4-bis(chloromethyl)furan, N-butyl-4H, 6H-furo [3,4-c]pyrrole and 4H,6H-thieno[3,4-c]furan. On the basis of the same dichloride, 3,4-dimethyl furan and furan-3,4-dialdehyde were synthesized.For part XLVI, see [10].