Alkaline Protease Production from <Emphasis Type="Italic">Brevibacterium luteolum</Emphasis> (MTCC 5982) Under Solid-State Fermentation and Its Application for Sulfide-Free Unhairing of Cowhides

Enzyme-based unhairing in replacement of conventional lime sulfide system has been attempted as an alternative for tackling pollution. The exorbitant cost of enzyme and the need for stringent process control need to be addressed yet. This study developed a mechanism for regulated release of protease from cheaper agro-wastes, which overcomes the necessity for stringent process control along with total cost reduction. The maximum protease activity of 1193.77 U/g was obtained after 96 h of incubation with 15% inoculum of the actinomycete strain Brevibacterium luteolum (MTCC 5982) under solid-state fermentation (SSF). The medium after SSF was used for unhairing without the downstream processing to avoid the cost involved in enzyme extraction. This also helped in the regulated release of enzyme from bran to the process liquor for controlled unhairing and avoided the problem of grain-pitting. Unhairing process parameters were standardized as 20% enzyme offer, 40% Hide-Float ratio at 5 ± 1 rpm, and process pH of 9.0. The cost of production of 1000 kU of the protease was calculated as 0.44 USD. The techno-economic feasibility studies for setting up an SSF enzyme production plant showed a high return on investment of 15.58% with a payback period of 6.4 years.     

TMDIM: an improved algorithm for the structure prediction of transmembrane domains of bitopic dimers

\(\alpha\)-Helical transmembrane proteins are the most important drug targets in rational drug development. However, solving the experimental structures of these proteins remains difficult, therefore computational methods to accurately and efficiently predict the structures are in great demand. We present an improved structure prediction method TMDIM based on Park et al. (Proteins 57:577–585, 2004) for predicting bitopic transmembrane protein dimers. Three major algorithmic improvements are introduction of the packing type classification, the multiple-condition decoy filtering, and the cluster-based candidate selection. In a test of predicting nine known bitopic dimers, approximately 78% of our predictions achieved a successful fit (RMSD <2.0 Å) and 78% of the cases are better predicted than the two other methods compared. Our method provides an alternative for modeling TM bitopic dimers of unknown structures for further computational studies. TMDIM is freely available on the web at https://cbbio.cis.umac.mo/TMDIM. Website is implemented in PHP, MySQL and Apache, with all major browsers supported.     

Effect of heterocyclic ring system on formation of dimeric quinolones under catalyst-free conditions: a green approach

The intermediate-dependent green and efficient synthesis of dimeric quinolones 4a–l and 7a–l by the Knoevenagel condensation followed by Michael-type addition of 4-hydroxy-1-methylquinolin-2(1H)-one 1a, b to indole-3-aldehydes 2a–f and aromatic aldehydes 5a–l in water through the condensed compound 3a–l under catalyst-free conditions is described. This reaction was found to be environmentally friendly, has easy-workup and shorter reaction times giving good yields of the product without the need for its isolation using column chromatography.     

Synthesis of RE Y zeolite for formulation of FCC catalyst and the catalytic performance in cracking of n-hexadecane

Research on Chemical Intermediates - This study presents the synthesis of rare earth-doped Y (RE Y) zeolite, its application in formulation of a fluid catalytic cracking (FCC) catalyst and the...     

Uncatalyzed synthesis of new substituted dihydro-2H-dipyrimido[1,2-a,4,5-d]pyrimidine-2,4(3H)-dione

Research on Chemical Intermediates - A convenient and new method has been developed for the synthesis of highly substituted dihydro-2H-dipyrimido[1,2-a,4,5-d]pyrimidine-2,4(3H)-dione derivatives by...     

Predicting the cell-wall compositions of <Emphasis Type="Italic">Pinus radiata</Emphasis> (radiata pine) wood using ATR and transmission FTIR spectroscopies

Because plant cell walls vary in their polysaccharide compositions and lignin contents, their monosaccharide compositions and lignin contents are often determined, but these analyses are time consuming and laborious. We therefore investigated Fourier transform infrared (FTIR) spectroscopy coupled with partial least squares (PLS) regression analysis as a way of rapidly predicting the monosaccharide compositions and lignin contents of the cell walls of compression wood (CW) and opposite wood (OW) of the gymnosperm Pinus radiata. The effects were investigated of sample moisture content (ambient or dry) and sample particle size (large particles, < 0.422 mm or small particles, < 0.178 mm) of milled wood on attenuated total reflectance (ATR) and transmission FTIR spectra, as well as the PLS-1 models and subsequent predictions. PLS-1 models were built using mixtures of CW and OW as the training set, to provide a linear range of monosaccharide compositions and lignin contents. Models were externally validated by predicting another set of wood mixtures before predicting CW and OW of a separate test set. Most of the monosaccharide amounts in the separate test set were best predicted by ATR spectroscopy of ambient large particles, achieving the lowest standard error values for the monosaccharides arabinose (0.36%), xylose (1.05%), galactose (1.79%), glucose (6.32%), and 4-O-methylglucuronic acid (0.20%). The results show the feasibility of using ATR spectroscopy of ambient large particles for the rapid prediction of monosaccharide compositions and lignin contents of plant cell walls.     

Symmetrical triindole as a central unit in the fluorene-containing polyphenol assembly

A new strategy was proposed for the synthesis of fluorene-containing indole polyphenols, based on the Suzuki–Miyaura reaction of hexabrominated symmetric indole trimer with the monoboryl N,N'-di[9,9'-bis(3',5'-dimethoxybenzyl)fluoren-2'-yl]aniline derivative and subsequent chemical transformations. The prepared compound was applicable for the development of a promising positive resist for electron-beam nanolithography capable of forming patterns with a 12 nm resolution.     

Formation of benzenediols upon electron-beam distillation of lignin mixtures with alkanes

In the process of the electron-beam distillation of lignin, its conversion into benzenediols increases in the presence of alkanes in the irradiated sample. An increase in the yield of benzenediols is accompanied by a decrease in the fractions of guaiacol, creosol, ethylguaiacol, and vinylguaiacol in the tar distilled off. It has been noted that alkanes serve as an additional source of atomic hydrogen and alkyl radicals, which, in turn, play a key role in the formation of benzenediols. In the presence of alkanes in the irradiated sample, guaiacol can be the main precursor of catechols; the proportion of guaiacol in the tar is almost three times below that in the case of distillation of individual lignin. It has been hypothesized that the chain decomposition of lignin can occur with the participation of ?H and ?CH₃ radicals.     

Study on the equilibria of the complex formation of molybdenum(VI) with 3,5-dinitrocatehol and 3-(2-naphthyl)-2,5-diphenyl-2H-tetrazolium chloride

The formation of an ion-associated complex between the anionic chelate of Mo(VI)–3,5-dinitrocatehol (3,5-DNC) and the cation of 3-(2-naphthyl)-2,5-diphenyl-2H-tetrazolium chloride (TV) in the liquid–liquid extraction system Mo(VI)–3,5-DNC–TV–H₂O–CHCl₃ was studied by spectrophotometry. The optimum conditions for the complex formation and extraction of the ion-associated complex were established. The effect of co-existing ions and reagents on the process of complex formation was investigated under optimum extraction conditions. The validity of Beer’s law was checked and some analytical characteristics were calculated. The association process in aqueous phase and the extraction equilibria were investigated and quantitatively characterized. The following key constants of the processes were calculated: association constant, distribution constant, extraction constant and recovery factor. The molar ratio of the reagents was determined by independent methods. Based on this, a reaction scheme, a general formula and a structure of the complex were suggested.