The Effect of Boundary Conditions on Gas-phase Synthesised Silver Nanoparticles

We have prepared spherical non-agglomerated silver nanoparticles by an evaporation–condensation–dilution/cooling technique. Silver was evaporated from a crucible in a tubular flow reactor. A porous tube diluter was used to quench the carrier gas at the outlet of the reactor to enhance the formation of small particles and to suppress agglomeration and other particle growth mechanisms. The number size distribution of the prepared particles was measured with a differential mobility analyser–condensation nucleus counter combination and the size and the shape of the particles were analysed with transmission electron microscope. The system was modelled using a sectional aerosol dynamics computer code to estimate the importance of different aerosol processes. In all conditions the particles obtained were non-agglomerated and spherical. The mean particle diameter varied from 4 to 10-nm depending on boundary conditions. From the modelling studies it can be concluded that the nucleation rate is the most important parameter controlling the final particle size.     

On a recursive method for the estimation of unknown parameters of partially observed chaotic systems

We investigate a recently proposed method for on-line parameter estimation and synchronization in chaotic systems. This novel technique has been shown effective to estimate a single unknown parameter of a primary chaotic system with known functional form that is only partially observed through a scalar time series. It works by periodically updating the parameter of interest in a secondary system, with the same functional form as the primary one but no explicit coupling between their dynamic variables, in order to minimize a suitably defined cost function. In this paper, we review the basics of the method, and investigate its robustness and new extensions. In particular, we study the performance of the novel technique in the presence of noise (either observational, i.e., an additive contamination of the observed time series, or dynamical, i.e., a random perturbation of the system dynamics) and when there is a mismatch between the primary and secondary systems. Numerical results, including comparisons with other techniques, are presented. Finally, we investigate the extension of the original method to perform the estimation of two unknown parameters and illustrate its effectiveness by means of computer simulations.     

HPTLC Determination of Swertiamarin and Amarogentin in Swertia Species from the Western Himalayas

JPC – Journal of Planar Chromatography – Modern TLC - A high-performance thin-layer chromatographic (HPTLC) method has been established for simple and rapid quantification of two...     

Generalized fractional programming duality: A parametric approach

Using a parametric approach, duality is presented for a minimax fractional programming problem that involves several ratios in the objective function.The first author is thankful to Natural Science and Engineering Research Council of Canada for financial support through Grant A-5319, and the authors are thankful to the anonymous referees for useful suggestions.     

Intra- and intermolecular trapping of cyclopentapyrazine carbenes derived from 1,2-dialkynylimidazoles

The thermolysis of 1,2-dialkynylimidazoles in benzene solution affords high yields of 7-phenyl-5H-cyclopentapyrazines, which presumably form by solvent trapping of cyclopentapyrazine carbene intermediates. In cases where dialkynylimidazole contains side chains that can participate in intramolecular carbene C-H insertion or olefin addition, these processes compete with solvent addition to afford novel tri- and tetracyclic pyrazines, which can be obtained in good yield when the thermolysis is carried out in hexafluorobenzene.     

Low-frequency Raman scattering in a polycrystalline C60 film: The role of orientational disorder

Low-frequency Raman scattering in the orientationally disordered phase of a polycrystalline C₆₀ film is investigated. By analogy with disordered media (glasses), the low-frequency Raman spectra are interpreted in terms of light scattering by localized vibrational states.     

Simulation of a turbulent premixed open V-shaped flame using contour advection with surgery

Despite its capability of high spatial resolution, simulation of turbulent flows with traditional Lagrangian (front tracking) scheme is often discouraged by numerical instability caused by clustering of marker nodes and topological changes of fronts. Contour advection surgery (CAS), being a robust front tracking scheme, can limit the growth of front complexity during simulation without jeopardizing accuracy or efficiency. This allows it to open up an advantage over traditional front-tracking schemes. It has already been demonstrated that CAS, with incorporation of the reaction sheet model, can accurately simulate the propagation and advection of a turbulent premixed V-shaped flame. In this study, it is further tested with 10 values of vortex circulation. A range of upstream turbulence levels of 1.8–19.8% was obtained. Results indicate that upstream turbulence increase the average flame length, flame zone area and the overall burning rate. Flame surface density Σ was also estimated. Maximum values of Σ obtained lie in the range 0.1–1.4 mm⁻¹. Skewness towards the burnt region was observed in all profiles of Σ. Similar to results from laboratory experiments, it was found that Σ values decreases with upstream turbulence. From this study, the ability of CAS to cope with intense turbulence is demonstrated and a better quantitative understanding on the scheme has also been acquired.     

Au deposits on graphite: On the nature of high temperature desorption peaks in CO thermal desorption spectra

Due to the discovery of Au as a catalyst for low temperature CO oxidation, the adsorption of CO on Au surfaces has attracted a lot of attention recently. On stepped and rough single crystal surfaces as well as on deposited particles two characteristic desorption states above 100 K have been observed via TPD. We have studied Au deposits on graphite in order to elucidate the nature of these desorption peaks in more detail. For this purpose, Au was deposited at 100 K and 300 K on HOPG as a weakly interacting support. In analogy to other supports, we obtain two desorption states (∼140 K and ∼170 K) whose relative intensities depend strongly on the deposition temperature with the high temperature peak being much more pronounced for the 100 K deposits. After annealing to 600 K, both states drastically lose intensity. XP spectra, on the other hand, show virtually no decrease of the Au 4f intensity as would be expected for desorption or significant changes of the particle morphologies. We conclude that both desorption peaks are defect-related and connected with under-coordinated Au atoms that are lost for the most part upon annealing. These sites could be located at the perimeter of dendritic islands or on small, defect-rich particles in addition to larger particles not adsorbing CO at 100 K. Preliminary STM results are in favour of the second interpretation.     

Bulk Sn1−xMnxO2 magnetic semiconductors without room-temperature ferromagnetism

Polycrystalline Sn_1−xMn_xO₂ (0≤x≤0.05) diluted magnetic semiconductors were prepared by solid-state reaction method and their structural and magnetic properties had been investigated systematically. The three Mn-doped samples (x=0.01, 0.03, 0.05) undergo paramagnetic to ferromagnetic phase transitions upon cooling, but their Curie temperatures are far lower than room temperature. The magnetization cannot be attributed to any identified impurity phase. It is also found that the magnetization increases with increasing Mn doping, while the ratio of the Mn ions contributing to ferromagnetic ordering to the total Mn ions decreases.