Flow injection analysis for calcium in serum,water and waste waters by spectrophotometry and by ion-selective electrode

The Flow Injection technique is shown to provide fast, reliable and sensitive methods for the determination of calcium in various aqueous as well as serum samples; spectrophotometric or potentiometric detection can be used. At sampling rates of 100–110 samples per hour, with 30-μl sample injections, high reproducibility of measurement and low reagent consumption are achieved in both methods. In the spectrophotometric method, the analytical readout is available within 12 s after sample injection at a total reagent consumption of 0.75 ml per analysis. The potentiometric measurement of the calcium activity in serum is placed on a reliable basis by alternating measurements of serum samples and aqueous standards without incurring any non-reproducible changes in potential between aqueous and serum solutions. This permits the simultaneous determination of pH and pCa, the analytical readout being available within XXX s of sample injection. The good agreement between the results obtained with the Flow Injection method and those attained by atomic absorption and EDTA titrations as well as pCa stat-measurements show that the new methods are potentially suitable for routine analysis.     

Application of a micro carbon rod atomizer as Br-spezific gas-chromatographic detector

Summary A micro carbon rod atomizer has been employed for specific and quantitative bromine determinations. This Br-specific gas-chromatographic detector works by help of InBr-bands and measurement at 372.7 nm. The performance of this flame band emission detector (FBD) is demonstrated by calibration curves and the detection limits of 2 examples (ethyl bromide, ethylene dibromide), the latter being 5 and 36 ng of bromine, respectively. The reproducibility has been found to be 4.3%. An example of this detector in comparison with a thermoconductivity detector (TCD) is presented.

---

Verwendung einer Mikro-Graphitküvette als Br-spezifischer Detektor für die Gas-Chromatographie

Zusammenfassung Eine Mikro-Graphit-Küvette wird für spezifische quantitative Brombestimmungen nach der Indium-Methode bei 372,7 nm benützt und in Verbindung mit einem Gas-Chromatographen als Br-spezifischer Detektor eingesetzt. Die Leistungsfähigkeit dieses Detektors wird an 2 Beispielen (Äthylbromid, Dibromäthan) mit Hilfe von Eichkurven, Bestimmung von Nachweisgrenzen u. ä. demonstriert. Die Nachweisgrenzen liegen bei 5 bzw. 36 ng Brom für die 2 genannten Substanzen. Die Reproduzierbarkeit der Messungen liegt bei 4,3%. Ein Beispiel für die Registrierung eines Gemisches verschiedener Substanzen, gemessen mit dem GC + Flammen-Banden-emissions-Detektor (FBD) und zum Vergleich mit einem Wärmeleitfähigkeitsdetektor (TCD), wird dargestellt.

This research work was supported by financial help of the Bundesminister für Forschung und Technologie in Bonn (GFR).     

Anionic polymerization of 1,2-butylene oxide

Anionic polymerizations of 1,2-butylene oxide were carried out in vacuum-sealed dilatometers in the range of 30–60°C. Potassium terbutoxide and dimsyl sodium were used as initiators; dimethyl sulfoxide (DMSO) and mixtures of DMSO with tetrahydrofuran were solvents. The polymer products were analyzed by gel permeation chromatography and infrared spectroscopy. The object of the investigation was to obtain information on the mechanism of the reaction and to elucidate some of its kinetic aspects. It has been shown that the polymerizations occur by two different processes, depending on the choice of experimental conditions. One of the processes involves free ions and ion-pairs, the other, ion-pairs alone. In the first case, where dimethyl sulfoxide is used as solvent, the order of the reaction with respect to the initiator concentration far exceeds unity (～1.8), while in the second case, involving mixed solvents, the order of the reaction, for all practical purposes, is one.     

IR-spektroskopische Untersuchungen wäßriger Lösungen mit Hilfe der ATR-Technik

The ATR-method is qualified for measuring aqueous solutions if the multiplereflection technique is used in such a way that strong water absorptions do not cover a large part of the information on the spectrum. The single-reflection technique is mainly suitable for solutions of 2-molar and higher concentrations. Organic acids, phenols, amides, saccharides and anorganic compounds had been measured. A practical example proved that there is the possibility of also taking quantitative measurements with the ATR-method.     

Mass-spectrometer investigation of 3, 6-dialkyl-2, 5-diketopiperazines

Analysis of mass-spectra of various 2, 5-diketopiperazines gives the basic fragmentation rules for their molecular ions, and the effects of nature and positions of substituents on the process.Mass-spectrometry Laboratory of the Institute of the Chemistry of Natural Compounds.Antibiotics Chemistry Laboratory of the Institute of the Chemistry of Natural Compounds.     

Eine einfache Theorie des mechanischen Relaxationsverhaltens der amorphen Polymeren

Zusammenfassung In der Arbeit wird eine einfache Theorie der mechanischen Relaxation der amorphen Polymeren entwickelt. Als kinetische Grundeinheit des Relaxationsvorgangs tritt ein ausN Monomereinheiten bestehendes Segment auf. Unter Einwirkung mechanischer Kräfte erfolgt eine Orientierung des Segments. Au\erdem werden durch die mechanischen Kräfte Umlagerungen der Monomereinheiten hervorgerufen, die eine Längenänderung des Segments bedingen. Davon ist die Segmentorientierung im wesentlichen nur vom freien Volumen abhängig, während die Umlagerungen als ein Diffusionsproze\ in einem äu\eren Potentialfeld betrachtet werden, das durch die benachbarten Monomereinheiten der gleichen Kette und der anderen Ketten gebildet wird.Die Theorie liefert für dieYoungsche Nachgiebigkeit; zwei Relaxationsgebiete, wobei im einzelnen Aussagen über die Temperaturabhängigkeit der Relaxations-frequenz, der Intensität und des Breitenparameters der Relaxationsgebiete erfolgen.     

Ein neues statistisches Segmentmodell zur Deutung der dielektrischen Eigenschaften hochpolymerer Lösungen

Zusammenfassung Es wird ein neues statistisches Segmentmodell angegeben, das zur Deutung der dielektrischen Eigenschaften der Lösungen von Kettenmolekülen mit seitständigen Dipolgruppen herangezogen werden soll.Es wird zunächst die exakte Lösung für das Relaxationsspektrum angegeben. Anschlie\end wird eine Näherungslösung abgeleitet, die einen Vergleich mit den Me\ergebnissen vonBrouckère und Mitarb. gestattet. Dabei zeigt sich eine gute übereinstimmung zwischen Experiment und Theorie.     

Rapid extraction of copper(II) with 2-thenoyltrifluoroacetone direct colorimetric determination in the organic phase

Summary The chelating agent, 2-thenoyltrifluoroacetone has been employed for rapid extraction and colorimetric determination of milligram amounts of copper(II) in one operation. At pH 2.4–6.0 copper(II) is extracted quantitatively from an aqueous solution by TTA-benzene in a single extraction. The green-coloured copper(II)-TTA chelate solution in benzene obeysBeer's law at 430 m over the range of 16–180g copper per millilitre. The coloured system is stable for 143 hours. It can tolerate silver, mercury(II), bismuth (<5 mg) and small amounts (<100 mg) of citrate and tartrate, whereas cobalt(II), nickel(II), iron(III), aluminium(III), cerium(IV), thorium and zirconium seriously interfere. The proposed method is reproducible to within ±1.4%.     

Synthesis and Structure of Triphenylbismuth Bis(Fluorobenzoates)

The reaction between triphenylbismuth, hydrogen peroxide, and 3,4,5-trifluorobenzoic or pentafluorobenzoic acid (molar ratio 1 : 1 : 2, respectively) in ether gave triphenylbismuth bis(3,4,5-trifluorobenzoate) (I) and triphenylbismuth bis(pentafluorobenzoate) (II) in 74 and 89% yields, respectively. The structures of compounds I and II were established by X-ray diffraction. The Bi atoms have a distorted trigonal-bipyramidal coordination with acylate groups in the axial positions. The OBiO angles are 170.2(2)° and 171.5(2)° in I and II, respectively. The Bi–C(Ph)_eq bond lengths vary in the range of 2.187(6)–2.204(5) Å, the Bi–O(acyl) lengths are 2.256(5) Å in I, and 2.281(5) and 2.318(5) Å in II. In the crystals I and II, the Bi and carbonyl O atoms are involved in intramolecular interactions (Bi···O(=C) 2.926(5)–3.176(5) Å), which increase the equatorial CBiC angles on the side of these contacts to 136.2(3)° and 138.6(2)° in I and II, respectively.     

Discontinuous-flow potentiometric determination of chloride in a large-volume wall-jet cell using an ion-selective electrode based on a silver chloride film chemically deposited on a silver iodide support

A robust and sensitive chloride ion-selective electrode can be prepared by modifying the surface of an iodide-selective electrode using the chemical reaction with mercuric chloride in an oxidizing medium containing excess chloride. A thin film of silver chloride is thus formed ensuring a rapid and reproducible response to chloride. The analytical parameters of this electrode are similar to those of commercial silver chloride ion-selective electrodes, but its electrical impedance and signal noise are substantially lower and the response somewhat faster. Its sensitivity toward surfactants is somewhat suppressed. The electrode was used for discontinuous flow potentiometric (DFP) determinations in a large-volume wall-jet cell in which the electrode surface can be continuously reactivated by a cleaning solution contained in the cell. The method was applied to determination of chloride in ground waters from an industrial waste dumping site. The limit of determination is low 9 mug Cl(-)/l (2.6 x 10(-7)M), the precision good (the relative standard deviation varies from 0.6 to 3.0% for chloride contents from 2.90 to 0.15 mg/l, respectively) and the method correlates satisfactorily with the results of an indirect AAS determination of chloride. The sample throughput is high-90 measurements can be carried out per hour, corresponding to 30-40 determinations per hour.