加窗傅里叶滤波和相干增强扩散在条纹去噪中的比较分析

光学干涉测量具有非接触、高精度和全场测量的优点,能对形变、折射率、位移等信息进行测量。噪声滤除是光学干涉测量产生的条纹图像处理的一个关键问题。加窗傅里叶滤波(Windowed Fourier Filtering,WFF)与自适应加窗傅里叶滤波(Adaptive Windowed Fourier Filtering,AWFF)是有效的频域去噪算法。相干增强扩散(Coherence Enhancing Diffusion,CED)则是基于偏微分方程的空域去噪算法。针对条纹去噪问题,比较了WFF、AWFF和CED在不同密度和不同噪声类型的条纹图上的表现,分析了它们的适用条纹类型。     

Syntheses and properties of organosoluble polyimides based on 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐4, 7‐methanohexahydroindan

A series of organosoluble aromatic polyimides (PIs) was synthesized from 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐4,7‐methanohexahydroindan (3) and commercial available aromatic dianhydrides such as 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (ODPA), 4,4′‐sulfonyl diphthalic anhydride (SDPA), or 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropanic dianhydride (6FDA). PIs (III_c–f), which were synthesized by direct polymerization in m‐cresol, had inherent viscosities of 0.83–1.05 dL/g. These polymers could easily be dissolved in N,N′‐dimethylacetamide (DMAc), N‐methyl‐2‐pyrrolidone (NMP), N,N‐dimethylformamide (DMF), pyridine, m‐cresol, and dichloromethane. Whereas copolymerization was proceeded with equivalent molar ratios of pyromellitic dianhydride (PMDA)/6FDA, 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA)/6FDA, or BTDA/SDPA, or ½ for PMDA/SDPA, copolyimides (co‐PIs), derived from 3 and mixed dianhydrides, were soluble in NMP. All the soluble PIs could form transparent, flexible, and tough films, and they showed amorphous characteristics. These films had tensile strengths of 88–111 MPa, elongations at break of 5–10% and initial moduli of 2.01–2.67 GPa. The glass transition temperatures of these polymers were in the range of 252–311°C. Except for III_e, the 10% weight loss temperatures (T_d) of PIs were above 500°C, and the amount of carbonized residues of the PIs at 800°C in nitrogen atmosphere were above 50%. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1681–1691, 1999     

Hyperbranched polyethyleneimine architecture onto poly(allylamine) by simple synthetic approach and the chelating characters

In resemblance to the ethoxylation of alkylamine or polymeric amines to introduce the nonionic hydrophiles by incorporation of ethylene oxide groups to make surfactants, ethyleneimine (EI) groups were introduced into poly(allylamine) by a simple in situ reaction of this polymer with 2‐chloroethylamine hydrochloride. The resultant polymers were allylic and chain‐pendant with hyperbranched polyethyleneimine. The EI number (n) of the polymers was determined by ¹H NMR. The percentages of primary, secondary, and tertiary amine present were estimated by potentiometric titration. The chelating abilities of the polymers that were applied growth conditions once (G₁, n ≈ 2) and twice (G₂, n ≈ 6) were also examined by potentiometric titration and ultraviolet–visible spectoscopy in the presence of metal ions (Cu⁺²). Continuous‐variation analysis revealed that each repeat unit of G₁ and G₂ behaves as a multident chelate and forms a stable complex with Cu⁺² ions utilizing an average of three EI dents per ion. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3018–3023, 2001     

Structural and Electronic Effects of Carbon‐Supported PtxPd1−x Nanoparticles on the Electrocatalytic Activity of the Oxygen‐Reduction Reaction and on Methanol Tolerance

We report a systematic investigation on the structural and electronic effects of carbon‐supported Pt_xPd_1?x bimetallic nanoparticles on the oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) in acid electrolyte. Pt_xPd_1?x/C nanocatalysts with various Pt/Pd atomic ratios (x=0.25, 0.5, and 0.75) were synthesized by using a borohydride‐reduction method. Rotating‐disk electrode measurements revealed that the Pt₃Pd₁/C nanocatalyst has a synergistic effect on the ORR, showing 50 % enhancement, and an antagonistic effect on the MOR, showing 90 % reduction, relative to JM 20 Pt/C on a mass basis. The extent of alloying and Pt d‐band vacancies of the Pt_xPd_1?x/C nanocatalysts were explored by extended X‐ray absorption fine‐structure spectroscopy (EXAFS) and X‐ray absorption near‐edge structure spectroscopy (XANES). The structure–activity relationship indicates that ORR activity and methanol tolerance of the nanocatalysts strongly depend on their extent of alloying and d‐band vacancies. The optimal composition for enhanced ORR activity is Pt₃Pd₁/C, with high extent of alloying and low Pt d‐band vacancies, owing to favorable O? O scission and inhibited formation of oxygenated intermediates. MOR activity also shows structure dependence. For example, Pt₁Pd₃/C with Pt_rich?corePd_rich?shell structure possesses lower MOR activity than the Pt₃Pd₁/C nanocatalyst with random alloy structure. Herein, extent of alloying and d‐band vacancies reveal new insights into the synergistic and antagonistic effects of the Pt_xPd_1?x/C nanocatalysts on surface reactivity.     

XANES Spectroscopic Studies of the Phase Transition in Gd2Zr2O7

The structural phase transition from fluorite to pyrochlore and the strength of the coordination bond of Zr–O in Gd₂Zr₂O₇ were investigated by XANES spectra of both O and Zr K‐edge. The energy difference of the O K‐edge absorption spectra at 532 and 536 eV was assigned to the crystal field splitting energy of the 4d orbital (ΔE_4d, t_2g and e_g) of the Zr ion. Also, in the samples prepared at higher temperatures, the 536 eV peak moves slightly to higher energy, whereas the absorption energy of 532 eV peak does not shift. A correlation between ΔE_4d and the strength of interaction between Zr (4d) and O (2p) orbitals has been found. Furthermore, two Zr K‐edge absorptions at 18020 and 18030 eV of Gd₂Zr₂O₇ have been observed; the splitting energy (ΔE), peak intensity ratio (I₁₈₀₃₀/I₁₈₀₂₀), and FWHM of the first derivative of the absorption curve depend on the preparation temperatures. The effect of crystal symmetry and Zr‐O bonding character on the XANES spectral profile was discussed.     

Structure and Electronic Configuration of an Iron(II) Complex in a LIESST State: A Pump and Probe Method

Switchable molecules : The electronic configurations of the Fe center in trans‐[Fe(tzpy)₂(NCS)₂] in low‐spin, high‐spin, and LIESST states (LIESST=light‐induced excited spin‐state trapping) were confirmed by K‐ and L‐edge X‐ray absorption and magnetic measurements. The molecular structures at 40 K before and after irradiation are superimposed in the picture, which demonstrates a single‐crystal‐to‐single‐crystal transition by irradiation.

     

Chemical Dealloying Mechanism of Bimetallic Pt–Co Nanoparticles and Enhancement of Catalytic Activity toward Oxygen Reduction

The chemical dealloying mechanism of bimetallic Pt–Co nanoparticles (NPs) and enhancement of their electrocatalytic activity towards the oxygen reduction reaction (ORR) have been investigated on a fundamental level by the combination of X‐ray absorption spectroscopy (XAS) and aberration‐corrected scanning transmission electron microscopy (STEM). Structural parameters, such as coordination numbers, alloy extent, and the unfilled d states of Pt atoms, are derived from the XAS spectra, together with the compositional variation analyzed by line‐scanning energy‐dispersive X‐ray spectroscopy (EDX) on an atomic scale, to gain new insights into the dealloying process of bimetallic Pt–Co NPs. The XAS results on acid‐treated Pt–Co/C NPs reveal that the Co–Co bonding in the bimetallic NPs dissolves first and the remaining morphology gradually transforms to a Pt‐skin structure. From cyclic voltammetry and mass activity measurements, Pt–Co alloy NPs with a Pt‐skin structure significantly enhance the catalytic performance towards the ORR. Further, it is observed that such an imperfect Pt‐skin surface feature will collapse due to the penetration of electrolyte into layers underneath and cause further dissolution of Co and the loss of Pt. The electrocatalytic activity decreases accordingly, if the dealloying process lasts for 4 h. The findings not only demonstrate the importance of appropriate treatment of bimetallic catalysts, but also can be referred to other Pt bimetallic alloys with transition metals.     

Atmospheric‐pressure spin plasma jets processing of polymethylmethacrylate surface using experimental design methodology

Atmospheric‐pressure spin plasma jets (APSPJs) have been developed to induce surface modifications on polymethylmethacrylate (PMMA). In this study, an experimental design methodology was used to investigate the influence of process parameters [such as radio frequency (RF) power, processing gap, and number of treatment cycles] on the characteristics of PMMA surface treated by APSPJs. It was observed from the atomic force microscope (AFM) and scanning electron microscope (SEM) results that the surface morphology of PMMA treated by direct plasma is much rougher than that treated by remote plasma. The direct plasma used in APSPJs processing created a substantial amount of nanostructure grains. Moreover, the measured XPS results showed that the O/C ratios of the PMMA surface were substantially increased and subsequently water contact angle decreased on direct plasma treatment. This decrease is due to an increase of oxygen‐containing functional groups on the PMMA surface by the APSPJs processing. From the statistical analysis, the RF power and the processing gap were found to play a major role in enhancing the hydrophilic properties of PMMA surface. In contrast, the number of treatment cycles played only a secondary role in this case. Finally, in this study the APSPJs processing was demonstrated to be an effective method for surface modification of PMMA by controlling processing parameters during the treatment process. Copyright © 2009 John Wiley & Sons, Ltd.     

Transition Metal Oxides for the Oxygen Reduction Reaction: Influence of the Oxidation States of the Metal and its Position on the Periodic Table

Electrocatalysts have been developed to meet the needs and requirements of renewable energy applications. Metal oxides have been well explored and are promising for this purpose, however, many reports focus on only one or a few metal oxides at once. Herein, thirty metal oxides, which were either commercially available or synthesized by a simple and scalable method, were screened for comparison with regards to their electrocatalytic activity towards the oxygen reduction reaction (ORR). We show that although manganese, iron, cobalt, and nickel oxides generally displayed the ability to enhance the kinetics of oxygen reduction under alkaline conditions compared with bare glassy carbon, there is no significant correlation between the position of a metal on the periodic table and the electrocatalytic performance of its respective metal oxides. Moreover, it was also observed that mixed valent (+2, +3) oxides performed the poorest, compared with their respective pure metal oxides. These findings may be of paramount importance in the field of renewable energy.