Preparation and characterization of functional group gradient surfaces

Functional group gradient surfaces where the density of functional groups changes gradually along the sample length were prepared. The functional group (? COOH, ? CONH₂, and ? OH group) gradient surfaces were produced by the treatment of low-density PE sheets using a corona with gradually increasing power, followed by the graft copolymerization of acrylic acid and subsequent substitution reaction of carboxylic acid groups to amide or hydroxyl groups. The prepared gradient surfaces were characterized by the measurement of water contact angle, FTIR-ATR, and ESCA. The gradient surfaces prepared can be used to systematically investigate the interactions of biological or other species in terms of the surface functional groups and their density of polymeric materials. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of nanoparticulate MnS within the pores of mesoporous silica

Mesoporous silica was loaded with nanoparticulate MnS via a simple post-synthesis treatment. The mesoporous material that still contained surfactant was passivated to prevent MnS formation at the surface. The surfactant was extracted and a novel manganese ethylxanthate was used to impregnate the pore network. This precursor thermally decomposes to yield MnS particles that are smaller or equal to the pore size. The particles exhibit all three common polymorphs. The passivation treatment is most effective at lower loadings because at the highest loadings (SiO₂:MnS molar ratio of 6:1) large particles (>50 nm) form at the exterior of the mesoporous particles. The integrity of the mesoporous network is maintained through the preparation and high order is maintained. The MnS particles exhibit unexpected ferromagnetism at low temperatures. Strong luminescence of these samples is observed and this suggests that they may have a range of important application areas.     

Correlating second harmonic optical responses of single Ag nanoparticles with morphology

Femtosecond laser excited second harmonic (SH) activity from single Ag nanoparticles is reported. A correlation of SH single-particle measurements with high-resolution imaging of particle morphology by TEM was achieved by creating position markers on an optical and electron transparent substrate (Si3N4 thin film, approximately 100 nm). We compared the SH activity of single Ag nanoparticles (nanospheres versus nanorods) and cluster structures (composed of two or multiple particles, e.g., dimers and trimers). The direct correlation of single-particle structures and SH activity, spectral and power dependence, strongly suggests one-photon resonant driven nonlinear oscillator response mechanism.     

A delicate balance of energetics. Subtleties associated with alpha-ketol-based bridge migration to afford 9-keto-10beta-p-methoxybenzyloxytaxanes

The feasibility of the title reaction has been pursued for the purpose of advancing a concise total synthesis of Taxol. Of the two closely related series examined, the first featured an exo-methylene group at C4. The second consisted of an alpha-epoxide at that site. Strikingly, the olefinic construct proved inert to attempted alpha-ketol rearrangement. In contrast, the oxiranyl derivative isomerized smoothly. The reaction sequence associated with arrival at taxane 18 is short (15 steps from a D-camphor derivative) and notably efficient. The thermodynamic issues that are raised by this investigation have been clarified by an assessment of molecular mechanics-derived (MM3) steric energy calculations.     

Bis induces growth inhibition and differentiation of HL-60 cells via up-regulation of p27

Bis (Bag-3, CAIR), a Bcl-2-interacting protein, promotes the anti-apoptotic activity of Bcl-2 and increased levels of Bis have been observed in several disease models. The involvement of Bcl-2 and some Bcl-2-binding proteins in differentiation has recently been reported. However, the relevance of Bis to cellular differentiation remains unknown. The findings herein show that Bis expression is up-regulated during the differentiation of HL-60 cells. To investigate the effect of Bis expression on differentiation, we established Bis-overexpressing HL-60 cells (HL-60-bis). HL-60-bis cells have a low nuclear: cytoplasmic ratio and indented nucleus in Wright- Giemsa staining, and an increased expression of CD11b in immunofluorescence study, indicating the promotion of differentiation. The overexpression of Bis also resulted in a retarded cell growth rate, accompanied by the accumulation of HL-60 cells at the G0/G1 phase of the cell cycle, which was sustained during the differentiation process. Western blot analysis revealed that the expression of p27, a representative inducer of cell cycle arrest at the G1 phase, was increased 2.5-fold in HL-60-bis cells compared to HL-60-neo cells. These results suggest that the Bis induced growth inhibition of HL-60 cells promotes G0/G1 phase arrest via up-regulation of p27, which seems to be a prerequisite for differentiation. Further studies will be required to define the exact roles of Bis on cellular differentiation more precisely.     

A new route to achiral and chiral 1,2-bis(phosphino)ethanes, 1-arsino-2-phosphinoethanes, and 1,3-bis(phosphino)propanes and the molecular structure and catalytic activity of some rhodium(I) complexes derived thereof

A series of unsymmetrical 1,2-bis(phosphino)ethanes R(2)PCH(2)CH(2)PR'(2) and 1-arsino-2-phosphinoethanes R(2)AsCH(2)CH(2)PR'(2) mainly with bulky substituents R and R' were prepared from the cyclic sulfate by stepwise cleavage of the carbon-oxygen bonds by LiPR(2) and LiPR'(2) or LiAsR(2) and LiPR'(2), respectively. Analogously, racemic mixtures of R(2)PCH(2)CH(Me)PPh(2)(R =iPr, Cy ) as well as the enantiomers (R)-, (R)- and (R)-tBu(2)PCH(2)CH(Me)PPh(2)(R)- were obtained from the corresponding unsymmetrical cyclic sulfates and (S)-. On a similar route, the racemates of the 1,3-bis(phosphino)propanes R(2)PCH(2)CH(2)CH(Me)PPh(2)(R =iPr, tBu ), optically pure (R)- and (S,S)-iPr(2)PCH(Me)CH(2)CH(Me)PPh(2)(S,S)- were prepared. The reaction of [[RhCl([small eta](4)-C(8)H(12))](2)] with chelating ligands L-L, where L-L is R(2)PCH(2)P(men)(2)(R =iPr, Ph; men =(1S,2R,5S)-menthyl), Cy(2)AsCH(2)P(men)(2), or (R)-, (R)-, (R)-, (R)- and (S,S)-, in the presence of AgPF(6), gave the complexes [Rh(eta(4)-C(8)H(12))(L-L)]PF(6) which were used as pre-catalysts in the hydrogenation of the methyl ester of alpha-acetamidocinnamic acid (ACM). Depending on L-L, the solvent, the temperature and the pressure of H(2), optical yields of up to 69% ee were achieved. For two of the rhodium complexes, and, the molecular structures were determined by X-ray crystallography.     

Synthesis of [ethylene-1-(eta(5)-4,5,6,7-tetrahydro-1-indenyl)-2- (eta(5)-4',5',6',7'-tetrahydro-2'-indenyl)]titanium dichloride, the elusive isomer of the Brintzinger-type ansa-titanocenes

We present a short synthesis of 1-(2-indenyl)-2-(3-indenyl)ethane (5) and a method for its conversion to the ansa-metallocene [ethylene(eta5-inden-1-yl)(eta5-inden-2-yl)]titanium dichloride (13). The synthetic strategy applied to prepare bisindene 5 relies on the efficient alkylation of 2-(phenylsulfonyl)indane followed by HMPA-assisted E1cB-elimination of phenylsulfinate. This tandem sequence circumvents the predisposition of indene to undergo C(1)-alkylation and enables access to C(2)-substituted indenes. The key step in the synthesis of the title ansa-titanocene (4) features a previously unreported equilibration step to generate the bis(indenide anion) of 5. Complexation with TiCl4.(THF)2 followed by hydrogenation of the product metallocene furnishes ansa-titanocene 4.     

Generation of 3-pyridyl biaryl systems via palladium-catalyzed Suzuki cross-couplings of aryl halides with 3-pyridylboroxin

The synthesis of 3-pyridyl biaryl systems can be readily achieved by means of palladium-catalyzed Suzuki cross-coupling reactions between aryl halides and 3-pyridylboroxin. A series of cross-couplings were conducted in order to investigate the scope and limitations of this protocol.     

Cavity search: An algorithm for the isolation and display of cavity-like binding regions

Summary A set of algorithms designed to enhance the display of protein binding cavities is presented. These algorithms, collectively entitled CAVITY SEARCH, allow the user to isolate and fully define the extent of a particular cavity. Solid modeling techniques are employed to produce a detailed cast of the active site region, which can then be color-coded to show electrostatic and steric interactions between the protein cavity and a bound ligand.     

Poly(dimethylsiloxane) microchip for precolumn reaction and micellar electrokinetic chromatography of biogenic amines

We have demonstrated that precolumn derivatization and capillary electrophoresis separation on a poly(dimethylsiloxane) (PDMS) microchip can be realized as efficient as those on glass microchips. In an optimized condition of micellar electrokinetic chromatography (MEKC), using 25 mM sodium borate buffer (pH 10.0) with 25 mM sodium dodecyl sulfate (SDS) and 5% v/v methanol, the electroosmotic flow in an oxidized PDMS microchip is stabilized within 3% for days. By employing a fluorometric derivatization with o-phthaldialdehyde (OPA) in an optimally designed reaction chamber, four most important biogenic amines occurring in foods, histamine, tyramine, putrescine, and tryptamine, are quantitatively determined in less than 1 min at the levels applicable to real samples. The migration behaviors of anionic OPA-derivatized biogenic amines under the MEKC conditions are analyzed, and it has been found that under our separation conditions, the electrophoretic mobility of the SDS micelles is significantly greater than those of the anions in the aqueous phase. The channel manifold in a PDMS substrate is fabricated using replica molding against a thick photoresist, SU-8, pattern generated by photolithography. The plate with the microchannel pattern is strongly, irreversibly bonded to another PDMS plate by using a new bonding technique, which employs surface oxidation by corona discharge generated from a cheap, handy source, Tesla coil.