A Surface Mounting Embedded Optical Transceiver with Bi-Directional Data Rate of Eight Channels × 10 Gbps

Abstract

The bi-directional data rate is investigated of an eight-channel × 10-Gbps optical transceiver with a size of 15 mm × 15 mm × 6 mm and ball grid array package form that was designed and fabricated. A passive optical coupling method is designed based on a coupling lens array, which is transformed to substrate through a carrier. This electrical performance is characterized through a 3D full wave simulation and shows great advantages compared with traditional pluggable optical transceivers. Experimental eye diagram measurement in loop-back mode via a 2-m-long multi-mode fiber array shows an eye width of 51.984 ps at a bit-error rate order of 10^?12, which proves the transceiver's ability for 10.3125-Gbps data transmission.     

Improving the resolution and the uniformity of AFM tip induced oxide patterns with pulsed voltages

Oxide line patterns were fabricated on the surface of titanium (Ti) film using atomic force microscopy (AFM) tip induced local oxidation technique. The growth behavior of the oxide under static voltages was studied. It was found the lateral growth of the oxide experienced two stages and the growth rate at the initial stage was very high. Pulsed voltages were employed and their effects on the controlling of the oxidation dynamics were examined. The results indicated that the high lateral and vertical growth rates of oxide at the initial stage could be suppressed with pulsed voltages. A minimum line width of 8 nm and highly uniform patterns were obtained with optimized voltage pulses. These results indicated that applying pulsed voltage is an effective method for improving both the resolution and the uniformity of the fabricated structures with scanning probe microscopy (SPM) tip induced local oxidation technique.     

Effect of Mn doping on the microstructures and photoluminescence properties of CBD derived ZnO nanorods

Mn-doped ZnO nanorods were synthesized from aqueous solutions of zinc nitrate hexahydrate, manganese nitrate and methenamine by the chemical solution deposition method (CBD). Their microstructures, morphologies and optical properties were studied in detail. X-ray diffraction (XRD) results illustrated that all the diffraction peaks can be indexed to ZnO with the hexagonal wurtzite structure. Scanning electron microscope (SEM) results showed that the average diameter of Mn-doped ZnO nanorods was larger than that of the undoped one. Photoluminescence (PL) spectra indicated that manganese doping suppressed the emission intensity and caused the blue shift of UV emission position compared with the undoped ZnO nanorods. In the Raman spectrum of Mn-doped ZnO nanorods, an additional mode at about 525 cm⁻¹ appeared which was significantly enhanced and broadened with the increase of Mn doping concentration.     

Facile controlled synthesis of micro/nanostructure MCrO4 (M = Ba, Pb) by using Gemini surfactant C12-PEG-C12 as a soft template

Gemini surfactants, double sodium α-sulfonic polyethylene glycol laurate (abbreviated C₁₂-PEG-C₁₂), were prepared and applied as soft templates in the controlled synthesis of BaCrO₄ and PbCrO₄ micro/nanocrystals. The template effects were investigated by adjusting the length of the spacer, using PEG400 and PEG4000, of the Gemini surfactant. The results indicated that the size and morphology of BaCrO₄ and PbCrO₄ micro/nanocrystals varied with the change in spacer length of C₁₂-PEG-C₁₂, suggesting that the different lengths of the polyethylene glycol group spacers in the Gemini surfactants played a key role in determining the size and shape of the MCrO₄ micro/nanoparticles. The dynamic process of the formation of the novel morphology BaCrO₄ crystals showed that the morphology grew from a round-bar polyhedron, to regular polyhedron, to approximate octahedron to a uniform pistachio nut shape. The growth mechanism of the BaCrO₄ micro/nanocrystals was explained that C₁₂-PEG-C₁₂ had a greater interfacial adsorption and would effectively control the shape evolution during the crystal growth, while PbCrO₄ could be explained that the Gemini surfactants can undergo liquid-crystalline phase transitions with long channels providing a soft template effect and derived the nanorods formation. Room temperature fluorescence spectra were studied and these showed that the pistachio-shaped BaCrO₄ microcrystals and PbCrO₄ nanorods possess photoactive luminescence properties with emission peaks at 470 and 549 nm, respectively.     

Solvothermal synthesis and characterization of CdSe nanocrystals with controllable phase and morphology

Zinc blende (ZB) CdSe hollow nanospheres were solvothermally synthesized from the reaction of Cd(NO₃)₂·4H₂O with a homogeneously secondary Se source, which was first prepared by dissolving Se powder in the mixture of ethanol and oleic acid at 205 °C. As Se power directly reacted with Cd(NO₃)₂·4H₂O in the above mixed solvents, wurtzite (W) CdSe solid nanoparticles were produced. Time-dependent experiments suggested that the formation of CdSe hollow nanospheres was attributed to an inside-out Ostwald ripening process. The influences of reaction time, temperature and ethanol/oleic acid volume ratio on the morphology, phase and size of the hollow nanospheres were also studied. Infrared (IR) spectroscopy investigations revealed that oleic acid with long alkene chains behaved as a reducing agent to reduce Se powder to Se²⁻ in the synthesis. Photoluminescence (PL) measurements showed that the ZB CdSe hollow nanospheres presented an obvious blue-shifted emission by 42 nm, and the W CdSe solid nanoparticles exhibited a band gap emission of bulk counterpart.     

Soliton control in optical lattices with periodic modulation of nonlinearity coefficient

We address the dynamics of solitons in the optical lattices with periodic modulation of the nonlinearity coefficient. Based on the quasi-particle approach, the properties of fundamental soliton localized in optical lattices are theoretically analyzed and shown its potential application for controllable soliton switching. Moreover, the phenomena of multi-soliton splitting and the single-soliton constituent trapping in the optical lattices are illustrated and discussed.     

Defect-Induced intrinsic magnetism in wide-gap III nitrides

Cation-vacancy induced intrinsic magnetism in GaN and BN is investigated by employing density-functional theory based electronic structure methods. The strong localization of defect states favors spontaneous spin polarization and local moment formation. A neutral cation vacancy in GaN or BN leads to the formation of a net moment of 3 muB with a spin-polarization energy of about 0.5 eV at the low density limit. The extended tails of defect wave functions, on the other hand, mediate surprisingly long-range magnetic interactions between the defect-induced moments. This duality of defect states suggests the existence of defect-induced or mediated collective magnetism in these otherwise nonmagnetic sp systems.     

一批金元时期古玻璃的EDXRF探针无损分析

利用EDXRF探针无损分析技术,分析了河南禹县阳翟遗址出土的一批金元时期的玻璃样品,以研究这批古玻璃的工艺技术特点.分析显示,所有蓝色玻璃样品的呈色剂均为CuO,而非CoO.从化学组成来看,这批古玻璃的种类较为复杂,主要包括钾钙玻璃、钠钙玻璃和铅钾钙玻璃等.     

碳纳米纤维负载Co3S4复合材料的合成及其在染料敏化太阳电池对电极的应用

采用水热法合成四硫化三钴（Co₃S₄）催化材料,并利用球磨和喷涂技术将其制备成对电极,结合新型无碘电解液Co²⁺/Co³⁺用于染料敏化太阳电池（dye-sensitized solar cells,简称DSCs）来研究其光电性能。测试结果显示,基于Co₃S₄对电极,DSCs的能量转化效率（power conversion efficiency,简称PCE）只有6.06%,远远低于Pt对电极（8.05%）。为了提高Co₃S₄的催化能力,采用静电纺丝技术制备碳纳米纤维（electrospun carbon nanofibers,简称ECs）,结合水热法制备出不同负载量的碳纳米纤维负载四硫化三钴（Co₃S₄/ECs）复合催化材料用于对电极,结果表明,Co₃S₄/ECs的PCE最高可达（8.22±0.08）%,优于Pt对电极。