航空发动机尾气静电带电机理分析与试验研究

航空发动机工作时燃烧室内发生复杂的物理化学变化,生成大量带电粒子,导致发动机尾气静电带电;理论分析了发动机喷流尾气中带电粒子产生演化过程和带电影响因素,讨论对比了多种测试原理与传感器方案,确立了非接触式静电感应测试方案,研制了共轴喇叭状静电传感器和静电监测系统,开发了自动测试软件并对某型航空发动机进行了机载尾气静电带电试验研究,验证了测试平台的有效性,成功获得了大量喷流尾气静电信号;研究结果表明:航空发动机正常工作时喷流尾气中带电粒子总体显正极性,平均体电荷密度约为0.077 nC/m³,发动机等效充电电流为2.26 nA。     

新型L-氨基酸尾式卟啉及其锌(Ⅱ)配合物的合成与光谱性质

用L-氨基酸和5-[邻-(2-溴乙氧基)苯基]-10,15,20-三苯基卟啉为原料合成了三种新型L-氨基酸尾式卟啉及其锌(Ⅱ)配合物,通过元素分析、红外光谱、紫外光谱、化学分析和质谱等对其进行了结构表征。测试并研究了它们在4 000～400 cm-1范围内的傅里叶变换红外光谱,对主要谱带进行了经验归属。     

软x射线近贴显微技术

软x射线近贴显微技术不但可使活的生物样品成象,分辨率高于光学显微镜,而且人为的样品准备程序在该技术中都可避免。本文描述了用高功率激光打靶产生的等离子体作为软x射线源而进行的近贴显微研究,并得到了分辨率好于1μm的结果。     

微合金化元素对Fe—A1界面结合的第一性原理研究

利用第一性原理中的DFT理论研究了Fe／A1界面的能量学和电子结构，讨论了替位型掺杂的元素Zn、Mn、Ni在Fe／A1界面处的作用．结果表明：元素Zn、Mn、Ni都会优先替换界面处的Fe原子，使得界面结合能增加，体系更稳定，有利于界面的结合；跨界面的Fe原子与Al原子之间的电荷布居、键长以及差分电荷密度图的计算表明：掺杂后有利于跨界面的Fe-Al间成键，从而加强了Al层与Fe基体的结合，且结合强度由强到弱依次为：掺Zn〉掺Mn〉掺Ni；与实验比较吻合．最后对掺杂Zn的增韧机理加以解释．     

Analysis of the lateral displacement and optical path difference in wide-field-of-view polarization interference imaging spectrometer

The mechanism of beam splitting and principle of wide-field-of-view compensation of modified Savart polariscope in the wide-field-of-view polarization interference imaging spectrometer (WPIIS) are analyzed and discussed. Formulas for the lateral displacement and optical path difference (OPD) produced by the modified Savart polariscope are derived by ray-tracing method. The theoretical and practical guidance is thereby provided for the study, design, modulation, experiment and engineering of the polarization interference imaging spectrometers and other birefringent Fourier-transform spectrometers based on Savart polariscopes.     

Design of Enhanced Catalysts by Coupling of Noble Metals (Au,Ag) with Semiconductor SnO2 for Catalytic Reduction of 4‐Nitrophenol

The reduction of 4‐nitrophenol (Nip) into 4‐aminophenol (Amp) by NaBH₄, which is catalyzed by both binary and ternary yolk–shell noble‐metal/SnO₂ heterostructures, is reported. The binary heterostructures contain individual Au or Ag nanoparticles (NPs) and the ternary heterostructures contain both Au and Ag NPs. The Au@SnO₂ yolk–shell NPs are synthesized via a silica seeds‐mediated hydrothermal method. Subsequently, the Au@SnO₂@Ag and Au@SnO₂@Au yolk–shell–shell (YSS) NPs are synthesized, whereby SnO₂ is located between the Au and Ag NPs. The morphology, composition, and optical properties of the as‐prepared samples are analyzed. For the binary heterostructures, the rate of the reduction reaction increases with decreasing particle size. The catalytic results demonstrate the synergistic effect of Au and Ag in the ternary metal–semiconductor heterostructures, which is beneficial to the catalytic reduction of Nip into Amp. Both the binary and ternary heterostructures exhibit significantly better catalytic performances than the corresponding bare Au and Ag NPs. It is envisaged that the current synthesized strategy will promote further interest in the field of bimetal NP‐based catalysis.     

铽－甲基吲哚乙酰丙酮三元配合物发光过程研究

测定和分析了ＲＥ．Ｌ１．Ｌ２（ＲＥ＝Ｔｂ（Ⅲ）、Ｇｄ（Ⅲ），Ｌ１＝３Ｍ（３甲基吲哚－１－乙酰基丙酮），Ｌ２＝ＴＰＰＯ、Ｐｈｅｎ、Ｄｉｐｙ）三元配合物的荧光光谱、磷光光谱、磷光寿命及变温荧光光谱等．讨论了Ｔｂ（Ⅲ）与配体之间的能级匹配和Ｌ１与Ｌ２的三重态之间传能的问题，说明了影响这些三元配合物荧光效率的主要因素及其发光过程．     

Development of a portable and fast wire tension measurement system for MWPC construction

In a multi-wire proportional chamber detector(MWPC), the anode and signal wires must maintain suitable tension, which is very important for the detector's stable and accurate performance. As a result, wire tension control and measurement is essential in MWPC construction. A high pressure3 He MWPC detector is to be used as the thermal neutron detector of the multi-functional reflectometer at China Spallation Neutron Source, and in the construction of the detector, we have developed a wire tension measurement system. This system is accurate,portable and time-saving. With it, the wire tension on an anode wire plane has been tested. The measurement results show that the wire tension control techniques used in detector manufacture are reliable.     

无光滤波六倍频微波信号产生的系统设计

基于两个级联偏振调制器,提出了一种高频谱纯度、稳定的六倍频微波信号产生方法。该方法通过适当调整偏振片的偏振方向、射频驱动信号电压和相位,实现无光滤波器条件下、任何波段六倍频微波信号的产生。利用Optisystem平台搭建的仿真系统,以S波段4 GHz信号为例,验证了该设计系统产生的六倍频信号质量,并分析了非理想射频驱动电压和相位对六倍频信号质量的影响,结果表明：该设计系统能产生最大光边带抑制比、射频无杂散抑制比分别为21.3,15.2 dB的六倍频微波信号;且非理想驱动电压和相位差的偏离应控制在理想值5%的范围之内。     

菌紫质薄膜光致折射率变化的理论计算和实验测量

基因改性细菌视紫红质BR-D96N由于M态寿命的延长而具有显著的光致变色特性.根据Kramers-Kronig变换关系,样品吸收光谱的变化会引起样品折射率的变化.本文首先从实验上测量了BR-D96N薄膜样品在光激发前后的吸收光谱,然后根据Kramers-Kronig变换关系,理论计算了对应此光致变色光谱变化的光致折射率变化光谱.实验上为了直接测量样品的光致折射率变化,采用Michelson干涉方法测量BR-D96N薄膜在不同探测波长下的光致折射率变化量,并与理论计算曲线进行了比较.