Synthesis of polymers by use of divalent metal salts of monohydroxyethyl phthalate: Metal-containing isocyanurate-type crosslinked polyurethanes

Divalent metal salts (I) of monohydroxyethyl phthalate have catalytic activity for polymerization of isocyanate groups. The synthesis of novel metal-containing isocyanurate-type crosslinked polyurethanes were investigated by the crosslinking reaction of I in DMF with diisocyanates or urethane prepolymers, that is, diisocyanate adducts of polyethylene glycol. 2,4-Toluene diisocyanate and diphenylmethane diisocyanate were used as diisocyanates, and DMF was the solvent. The crosslinking reactions were followed by determining the gelation time. Gelation time decreased with increasing temperature. The Ca salt was more effective than the Mg salt in the crosslinking reaction. The yields of resulting metal-containing three-dimensional polymers decreased with increasing metal content in the feed. The Ca salt was more easily introduced into the network polymers than the Mg salt was. Decomposition temperatures decreased on introducing metals into the network polymers. Some physical properties of the metal-containing network polymers are also discussed.     

Determination of electrochemical kinetic parameters by square-wave polarography: Polarographic reduction of Zn(II) in 1 M KCl,KBr, and KNCS solutions

A new method of determining electrochemical kinetic parameters by square-wave polarography was presented, in which the faradaic current at θ/2, θ being the half-period of superimposed square-wave voltage, was used for the analysis. The method gave the following kinetic parameters for the electrode reaction, Zn(II) + 2e(Hg), in aqueous solutions at 25° C: k_c^θ=0.0052 cm s^?1 and α_c=0.36 in 1 M KCl, k_c^θ=0.011 cm s^?1 and α_c=0.30 in 1 M KBr, and k_c^θ=0.020 cm s^?1 and α_c=0.52 in 1 M KNCS. Induced adsorption of Zn(II) on the dropping mercury electrode was suggested in solutions containing thiocyanate ions.     

Application of samarium diiodide (SmI2)-induced reduction of gamma-acetoxy-alpha,beta-enoates with alpha-specific kinetic electrophilic trapping for the synthesis of amino acid derivatives

Gamma-acetoxy-alpha,beta-enoates were easily reduced by samarium diiodide (SmI2) in THF to generate samarium dienolates which were kinetically trapped with ease at their alpha-positions by electrophiles (proton, aldehydes or ketones) to yield (E)-alkene dipeptide isosteres or gamma-amino acid derivatives in high chemical yields.     

SmI2-mediated reduction of gamma,gamma-difluoro-alpha,beta-enoates with application to the synthesis of functionalized (Z)-fluoroalkene-type dipeptide isosteres

A samarium diiodide (SmI(2))-mediated reduction of gamma,gamma-difluoro-alpha,beta-enoates (15, 29, and 34) was successfully applied to the synthesis of (Z)-fluoroalkene dipeptide isosteres (23, 30, and 35), which have served as potential dipeptide mimetics. Reduction of the gamma,gamma-difluoro-alpha,beta-enoates by SmI(2) proceeded via successive two-electron transfers to form dienolate species which upon kinetically controlled trapping with t-BuOH yielded Xaa-Gly-type fluoroalkene isosteres exemplified by 23, 30, and 35. Replacement of the t-BuOH kinetic trapping agent with aldehydes or ketones provided access to alpha-substituted fluoroalkene isosteres (43 and 45) through aldol reactions of Sm-dienolates with the carbonyl compounds. Of particular note, the use of the SmI(2)-HCHO reagent system with chiral enoate 34 provided D-Phe-psi[(Z)-CF[double bond]CH]-D/L-Ser isosteres (45), which could be converted to enantiomerically pure isosteres (49-52) that bore a variety of side chain functionalities at the alpha-position. This was achieved by a sequence of manipulations consisting of beta-lactone formation followed by chromatographic separation and ring-opening with soft nucleophiles. Included in the present work is the first utilization of a Rh-catalyzed Reformatsky reaction of chiral imines for the stereoselective preparation of alpha,alpha-difluoro-beta-amino acid derivatives (28 and 33). The appropriate choice of reagents (carbonyl compounds for kinetic trapping or ring-opening nucleophiles and imines for Reformatsky reactions) allows the presented methodology to yield various fluoroalkene isosteres possessing a wide range of side chain functionalities.     

Radiation-induced copolymerizations of perfluorovinyl acetic acid and its methyl ester with α-olefin

Homopolymerizations and copolymerizations of perfluorovinyl acetic acid (FVA) and its methyl ester (MFVA) were carried out by γ radiation at a temperature of 25°C, a dose rate of 1 × 10⁶ rad/hr, and FVA/α-olefin and MFVA/α-olefin ratios of 10/90-90/10 in the monomer mixture. FVA and MFVA gave small quantities of brown and greasy low-molecular-weight homopolymers. The polymerization rates of both FVA and MFVA were extremely small, as shown by the maximum G value of monomer consumption of 12. FVA and MFVA reacted with α-olefin to form waxlike copolymers. The copolymerization rates of both FVA and MFVA with α-olefin were remarkably larger than those of the homopolymerizations, particularly with ethylene. The polymer compositions of FVA/ethylene or MFVA/ethylene was nearly 1/2 over a wide range of the monomer compositions. The Mayo–Lewis method gave negative r₁ (FVA) and r₁ (MFVA). The polymer composition curves could be well interpreted by introducing the penultimate model.     

A large thermal hysteresis loop produced by a charge-transfer phase transition in a rubidium manganese hexacyanoferrate

In a rubidium manganese hexacyanoferrate, RbMn[Fe(CN)(6)], the magnetic susceptibility (chi(M)) decreased at 225 K (=T(1/2)decreasing) and abruptly increased at 300 K (=T(1/2)increasing) in the cooling and warming processes, respectively. X-ray photoelectron spectroscopy and infrared spectroscopy indicated that the high-temperature (HT) and low-temperature (LT) phases were composed of Mn(II)-NC-Fe(III) and Mn(III)-NC-Fe(II), respectively. A structural change from cubic (F43m, a = 10.533 A) to tetragonal (I4m2, a = b = 7.090 A, c = 10.520 A) accompanied the phase transition, and, on the basis of these results, the HT and LT phases were assigned to Mn(II)(t(2g)(3)e(g)(2), (6)A(1g); S = (5)/(2))-NC-Fe(III) (t(2g)(5), (2)T(2g); S = (1)/(2)) and Mn(III)(e(g)(2)b(2g)(1)a(1g)(1), (5)B(1g); S = 2)-NC-Fe(II) (b(2g)(2)e(g)(4), (1)A(1g); S = 0), respectively. This phenomenon is caused by a metal-to-metal charge transfer from Mn(II) to Fe(III) and a Jahn-Teller distortion of the produced Mn(III) ion. The reaction mechanism is discussed, considering the entropy difference between the HT and LT phases.     

Thermodynamically stable vesicle formation from glycolipid biosurfactant sponge phase

Thermodynamically stable vesicle (L(alpha1)) formation from glycolipid biosurfactant sponge phase (L(3)) and its mechanism were investigated using a "natural" biocompatible mannosyl-erythritol lipid-A (MEL-A)/L-alpha-dilauroylphosphatidylcholine (DLPC) mixture by varying the composition. The trapping efficiency for calcein and turbidity measurements clearly indicated the existence of three regions: while the trapping efficiencies of the mixed MEL-A/DLPC assemblies at the compositions with X(DLPC)< or =0.1 or X(DLPC)> or =0.8 were almost zero, the mixed assemblies at the compositions with 0.1 or =0.8 were multilamellar vesicles (L(alpha)) with diameter from 2 to 10 microm. Meanwhile, dynamic light scattering (DLS) measurement revealed that the average size of the vesicles at the composition of X(DLPC)=0.3 was 633.2 nm, which is remarkably small compared to other compositions. Moreover, the mixed vesicle solution at the composition of X(DLPC)=0.3 was slightly bluish and turbid and kept its dispersion stability at 25 degrees C for more than 3 months, indicating the formation of a thermodynamically stable vesicle (L(alpha1)). These results exhibited the formation of a thermodynamically stable vesicle (L(alpha1)) with a high dispersibility from the MEL-A/DLPC mixture. The asymmetric distribution of MEL-A and DLPC in the two vesicle monolayers caused by the difference in geometrical structures is very likely to have changed their self-assembled structure from a sponge phase (L(3)) to a thermodynamically stable vesicle (L(alpha1)).     

Directed evolution experiments reveal mutations at cycloartenol synthase residue His477 that dramatically alter catalysis

[reaction: see text] Cycloartenol synthase cyclizes and rearranges oxidosqualene to the protosteryl cation and then specifically deprotonates from C-19. To identify mutants that deprotonate differently, randomly generated mutant cycloartenol synthases were selected in a yeast lanosterol synthase mutant. A novel His477Asn mutant was uncovered that produces 88% lanosterol and 12% parkeol. The His477Gln mutant produces 73% parkeol, 22% lanosterol, and 5% Delta(7)-lanosterol. These are the most accurate lanosterol synthase and parkeol synthase that have been generated by mutagenesis.     

Steric bulk at position 454 in Saccharomyces cerevisiae lanosterol synthase influences B-ring formation but not deprotonation

[reaction: see text] Lanosterol synthase converts oxidosqualene to the tetracyclic sterol precursor lanosterol. The mutation experiments described here show that an active-site valine residue in lanosterol synthase contributes to cyclization control through steric effects. Mutating to smaller alanine or glycine residues allows formation of the monocyclic achilleol A, whereas the leucine and isoleucine mutants make exclusively lanosterol. The phenylalanine mutant is inactive.