Controlled deposition of calcium carbonate particles on porous membranes by using alternating current system

The deposition of calcium carbonate particles in the absence of additives was performed through the application of an alternating current. Solutions of calcium chloride and sodium carbonate were filled in glass cells, and a porous polymer membrane was interposed between the glass cells. An alternating current with a sine waveform (frequency: 10 Hz) was applied by using a platinum electrode. In this process, the reciprocal migration of calcium and carbonate ions toward the interface of the pores on the membrane takes place. Moreover, ion mixing occurs to a small extent at the interface of the pores. An alternating current was applied for 30 min during which the ion mixing continued. When observed using a scanning electron microscope, a majority of the formed calcium carbonate particles was found to exhibit a spheroidal vaterite crystal structure. This crystal structure was confirmed to be vaterite after characterization by X-ray diffraction. In the absence of an alternating current, only calcite was formed on the porous polymer membrane. Taking this result into account, it was concluded that the alternating current could induce reciprocal ion migration through the pores of the membrane, and vaterite deposition can be achieved. This is one of the methods employed for the calcium carbonate formation on the porous membrane by using an alternating current system.     

Reaction of N-methyl-5-tributylstannyl-4-fluoro-1H-pyrazole and its application to N-methyl-chromeno[2,3-d]pyrazol-9-one synthesis

N-Methylation by sequential treatment of 5-tributylstannyl-4-fluoro-1H-pyrazole 1 with LDA and iodomethane regioselectively afforded the compound 2a in high yield. The addition reaction of 5-lithiated-4-fluoro-1H-pyrazole generated from 2a with a wide range of electrophiles allowed a facile introduction of different substituents at position 5 in good yields. The adduct 3d was efficiently converted to N-methyl-chromeno[2,3-d]pyrazol-9-one 9 in 3 steps.     

In situ and real-time visualisation of oxygen distribution in DMFC using a porphyrin dye compound

A luminescent porphyrin dye film has been coated onto a transparent separator on the cathode side of a direct methanol fuel cell (DMFC) to visualise clearly oxygen distribution under operating conditions by analysing emission from the dye.     

Establishing ultimate biointerfaces covered with phosphorylcholine groups

The phospholipid molecule is a typical component of the cell membrane. In particular, the phosphorylcholine polar group is an electrically neutral head group. 2-Methacryloyloxyethyl phosphorylcholine (MPC) comprising a phosphorylcholine group side chain was designed with the cell membrane as an inspiration. Versatile polymers comprising MPC could be synthesized, and their specific biofunctions were evaluated. Establishing an ultimate biointerface with multiple functions is important from the viewpoint of biomaterials science. Nonspecific protein adsorption is essential for achieving versatile biomedical applications. Simultaneously, bioconjugation and retention of its biofunction are crucial for a high-performance biointerface. In this review article, a tunable biointerface comprising MPCs was introduced. In particular, the use of nanoparticles and polymer brushes as biointerfaces was described along with the perspective versatility of their biological applications.     

Highly efficient total synthesis of the marine natural products (+)-avarone, (+)-avarol, (-)-neoavarone, (-)-neoavarol and (+)-aureol

Biologically important and structurally unique marine natural products avarone (1), avarol (2), neoavarone (3), neoavarol (4) and aureol (5), were efficiently synthesized in a unified manner starting from (+)-5-methyl-Wieland-Miescher ketone 10. The synthesis involved the following crucial steps: i) Sequential BF(3)Et(2)O-induced rearrangement/cyclization reaction of 2 and 4 to produce 5 with complete stereoselectivity in high yield (2 --> 5 and 4 --> 5); ii) strategic salcomine oxidation of the phenolic compounds 6 and 8 to derive the corresponding quinones 1 and 3 (6 --> 1 and 8 --> 3); and iii) Birch reductive alkylation of 10 with bromide 11 to construct the requisite carbon framework 12 (10 + 11 --> 12). An in vitro cytotoxicity assay of compounds 1-5 against human histiocytic lymphoma cells U937 determined the order of cytotoxic potency (3 > 1 > 5 > 2 > 4) and some novel aspects of structure-activity relationships.     

Accessibility and size of <Emphasis Type="Italic">Valonia</Emphasis> cellulose microfibril studied by combined deuteration/rehydrogenation and FTIR technique

We report an FTIR method to measure the accessibility and the size of cellulose microfibrils from the cell wall of Valonia ventricosa. This method is similar to the conventional deuteration technique for measuring the accessibility of cellulosic materials; however, the difference in our method is that the hydroxyl groups O2H, O3H, and O6H in the crystalline region were initially completely deuterated. The sample was then rehydrogenated by soaking in water at 25 °C, so that the OD groups on the surface were rehydrogenated. The ratio of OH to OD absorbance was used to calculate the number of surface vs. core cellulose chains in a microfibril. The obtained experimental ratio of 0.934 was consistent with the value calculated for a previously published 33 × 38 chain Valonia model (Sugiyama et al. 1984). The rehydrogenation process was further investigated by immersing the sample in water at elevated temperatures. At temperatures above 120 °C, rehydrogenation was more efficient, and the efficiency plots vs. rehydrogenation temperature showed two inflection. These points may correspond to the temperature where the cleavage of inter-chain hydrogen bonds and/or crystalline-phase transition would have been occurred.     

Quality of twelve clarithromycin dry syrup formulations-bitterness, grittiness and uniformity of drug loading

The objective of the study was to evaluate the bitterness, grittiness and uniformity of drug loading as measures of the quality of 12 formulations of clarithromycin dry syrup (CAMDS), comprising one branded and 11 generic products. Some of the generic CAMDS formulations were more bitter than the branded product while others had similar bitterness when tested as aqueous suspensions. Only one generic product was less bitter than the branded product when tested as a suspension in acidic sports drink. The usual dissolution test described in JP XV could not be used to evaluate the bitterness of the products. A brief dissolution test using only 12.5 ml of water was used to evaluate the bitterness of the products in aqueous suspensions. There were considerable variances in the grittiness of the various products, which were independent of particle size. Changes in grittiness level seemed to be correlated with changes in the intensity of bitterness due to the disintegration of the formulation. Finally, there was less variation in the uniformity of drug loading for the branded product than for the generic products. These data may be useful when selecting which CAMDS formulation to prescribe.     

Intramolecular cyclization of beta,beta-difluorostyrenes bearing an iminomethyl or a diazenyl group at the ortho position: synthesis of 3-fluorinated isoquinoline and cinnoline derivatives

o-Formyl-substituted beta,beta-difluorostyrenes readily react with NH(2)OH.HCl or NH(4)OAc to afford 3-fluoroisoquinoline derivatives in good yield via (i) the formation of the corresponding oximes or imines and (ii) subsequent intramolecular replacement of a vinylic fluorine by the sp(2) nitrogen of the iminomethyl group (HON=CH- or HN=CH-). Beta,beta-Difluorostyrenes bearing an o-diazenyl group (HN=N-), generated by reduction of the corresponding diazonium ions, undergo a similar substitution to afford 3-fluorinated cinnolines.     

Reinvestigation of the stereochemistry of kulokekahilide-2

An attempt to carry out a total synthesis of kulokekahilide-2 (1) by macrolactonization of a seco acid prepared from a suitably protected hexapeptide and a dioxy acid moiety unexpectedly resulted in the formation of the 43-epimer (1a) of the cytotoxic depsipeptide, for which structure 1b has previously been proposed. A second attempt involving macrolactamization of the corresponding amino acid gave the target product, 1b, but the spectral data of the product did not match those of natural 1. Furthermore, neither 1a nor 1b showed any cytotoxicity, from which it is concluded that the structure of natural 1 is incorrect and should be re-examined.