Grafting of Tetrafluoroethylene onto Polyethylene by Pre-irradiation Technique

Grafting of tetrafluoroethylene onto polyethylene was carried out by a pre-irradiation technique. It was found that grafting proceeds very rapidly at -35°C in the liquid phase of tetrafluoroethylene. Takathene, which was prepared by a radiation process at Takasaki Radiation Chemistry Research Establishment, was found to be most suitable for grafting compared to other polyethylenes. The specific surface is extremely high in the Takathene, and this may be the most important reason for the high grafting speed. On the other hand, IR measurements of the grafted copolymers showed a characteristic absorption band at 1110 cm-1 which may be attributed to the structure of the grafting (branching) position. It was also found that grafted polytetrafluoroethylene can be crystallized during grafting. This is the first case of grafted polymers being in a crystalline state.     

Multidimensional angle sensing method using guided-mode resonance

Optical Review - A waveguide grating on a transparent substrate can serve as an optical notch filter owing to guided-mode resonance. The filtering wavelength is highly sensitive to an incidence...     

Facile Preparation of Organometallic Nanorods from Various Ethynyl-Substituted Molecules

A facile method to prepare one-dimensional (1D) organometallic nanomaterials from various ethynyl-substituted molecules is reported. The reactions of 3-chloro-1-ethynylbenzene, p-tBu-phenylacetylene and 4-ethynylbiphenyl with Cu⁺ ions in acetonitrile yield nanorod-shaped copper acetylides (Cu−C≡C−R) crystals. In the case of linear alkynes, namely, propyne, 1-pentyne and 1-hexyne, it was found that using an aqueous ammonia/ethanol mixed solvent instead of acetonitrile is a better approach to obtain 1D nanostructures. This procedure also enables us to prepare functional 1D nanomaterials. We demonstrate the preparation of a paramagnetic nanorod from the organic radical p-ethynylphenyl nitronyl nitroxide, and fluorescent nanorods from 9-ethynylphenanthrene and 2-ethynyl-9,9′-spirobifluorene.     

Whole-body counter surveys of over 2700 babies and small children in and around Fukushima Prefecture 33 to 49 months after the Fukushima Daiichi NPP accident

BABYSCAN, a whole-body counter (WBC) for small children was developed in 2013, and units have been installed at three hospitals in Fukushima Prefecture. Between December, 2013 and March, 2015, 2707 children between the ages of 0 and 11 have been scanned, and none had detectable levels of radioactive cesium. The minimum detectable activities (MDAs) for ¹³⁷Cs were ≤3.5 Bq kg⁻¹ for ages 0–1, decreasing to ≤2 Bq kg⁻¹ for ages 10–11. Including the ¹³⁴Cs contribution, these translate to a maximum committed effective dose of ∼16 µSv y⁻¹ even for newborn babies, and therefore the internal exposure risks can be considered negligibly small.Analysis of the questionnaire filled out by the parents of the scanned children regarding their families’ food and water consumption revealed that the majority of children residing in the town of Miharu regularly consume local or home-grown rice and vegetables, while in Minamisoma, a majority avoid tap water and produce from Fukushima. The data show, however, no correlation between consumption of locally produced food and water and the children’s body burdens.     

Fabrication and characterization of GaAs quantum well buried in AlGaAs/GaAs heterostructure nanowires

We developed a growth method for forming a GaAs quantum well contained in an AlGaAs/GaAs heterostructure nanowire using selective-area metal organic vapor phase epitaxy. To find the optimum growth condition of AlGaAs nanowires, we changed the growth temperature between 800 and 850 °C and found that best uniformity of the shape and the size was obtained near 800 °C but lateral growth of AlGaAs became larger, which resulted in a wide GaAs quantum well grown on the top (1 1 1)B facet of the AlGaAs nanowire. To form the GaAs quantum well with a reduced lateral size atop the AlGaAs nanowire, a GaAs core nanowire about 100 nm in diameter was grown before the AlGaAs growth, which reduced the lateral size of AlGaAs to roughly half compared with that without the GaAs core. Photoluminescence measurement at 4.2 K indicated spectral peaks of the GaAs quantum wells about 60 meV higher than the acceptor-related recombination emission peak of GaAs near 1.5 eV. The photoluminescence peak energy showed a blue shift of about 15 meV, from 1.546 to 1.560 eV, as the growth time of the GaAs quantum well was decreased from 8 to 3 s. Transmission electron microscopy and energy dispersive X-ray analysis of an AlGaAs/GaAs heterostructure nanowire indicated a GaAs quantum well with a thickness of 5−20 nm buried along the 〈1 1 1〉 direction between the AlGaAs shells, showing a successful fabrication of the GaAs quantum well.     

Synthesis and photocatalytic activity of mesoporous SiO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript>

Mesoporous SiO₂–TiO₂ was synthesized by the sol–gel method using Si(OC₂H₅)₄, Ti(OC₂H₅)₄, and stearyltrimethylammonium chloride. By using acetylacetone as the capping agent of Ti(OC₂H₅)₄, homogeneous SiO₂–TiO₂ composite was obtained. Spherical mesoporous SiO₂–TiO₂ was also synthesized by the sol–gel method using W/O emulsion under microwave irradiation. The specific surface area of these mesoporous SiO₂–TiO₂ materials decreased when the Ti/Si molar ratio was higher than 0.1, which indicated that Ti was homogeneously distributed in mesoporous SiO₂ matrix at Ti/Si ≦ 0.1. The photocatalytic activity of mesoporous SiO₂–TiO₂ materials was investigated by the degradation of methylene-blue in water under UV light irradiation. Mesoporous SiO₂–TiO₂ was effective for the adsorption–decomposition of methylene-blue.     

Magnetorheology of colloidal dispersion containing Fe nanoparticles synthesized by the arc-plasma method

Spherical crystalline Fe nanoparticles, ∼100 nm in diameter, were synthesized under Ar-50% H₂ arc-plasma. These nanoparticles were dispersed in silicone oil after silane treatment on as-grown thin oxide layer (∼2 nm) to make their surfaces hydrophobic. The resulting Fe nanoparticles exhibited a high saturation magnetization of ∼190 emu/g at room temperature. The static magnetorheological behavior was measured for the colloidal dispersion (solid concentration: 15 vol%) at room temperature under magnetic flux densities of 0-0.3 T, using a parallel-plate-type commercial rheometer. The yield stress continuously increased with magnetic flux density, demonstrating the Bingham plastic behavior. Moreover, subjecting the sample to a magnetic flux density of 0.3 T increased the yield stress by ∼10². Additionally, the colloidal dispersion exhibited good stability against sedimentation.     

A direct method for the separation and quantification of bile acid acyl glycosides by high-performance liquid chromatography with an evaporative light scattering detector

A direct method for the separation and quantification of a series of bile acid acyl glycosides using high-performance liquid chromatography coupled to an evaporative light scattering detector (HPLC-ELSD) is described. Complete separation of each of 15 bile acid acyl 24-alpha-glucosides and their 24-beta-anomers and 24-beta-galactosides was achieved by the stepwise gradient elution mode on a C18 column using a mixture of acetonitrile-methanol (8:2, v/v) and 1% aqueous acetic acid as the mobile phase. 24-beta-Galactosides were always eluted faster than the corresponding 24-beta-glucosides, which eluted after the corresponding 24-alpha-anomers. Calibration curves of different 24-beta-galactosides were linear over a range of 0.2-40 nmol of injected amount and the detection limits (S/N > 3) were from 0.08 to 0.1 nmol. The present HPLC-ELSD method may provide an insight into the separation and quantification of the biologically interesting neutral bile acids.     

Pyrimidine dimer formation and oxidative damage in M13 bacteriophage inactivation by ultraviolet C irradiation

The mechanism by which UV-C irradiation inactivates M13 bacteriophage was studied by analyzing the M13 genome using agarose gel electrophoresis and South-Western blotting for pyrimidine dimers. The involvement of singlet oxygen (1O2) was also investigated using azide and deuterium oxide and under deoxygenated conditions. With a decrease in M13 infectivity on irradiation, single-stranded circular genomic DNA (sc-DNA) was converted to Form I and Form II, which had an electrophoretic mobility between that of sc-DNA and linear-form DNA. However, the amount of sc-DNA remaining was not correlated with the survival of M13. The formation of cyclobutane pyrimidine dimers (CPD) and pyrimidine (6-4) pyrimidone photoproducts ((6-4)PP) increased as a function of irradiation dose. The decrease in M13 infectivity was highly correlated with the increase in CPD and (6-4)PP, whereas no change was seen in M13 coat protein on sodium dodecyl sulfate-polyacrylamide gel electrophoresis. 8-Oxo-7,8-dihydro-2'-deoxyguanosine did not form in the M13 genome after UV-C irradiation. Inactivation of M13 was neither enhanced by deuterium oxide nor inhibited by azide. Deoxygenation of the M13 suspension did not affect the inactivation, indicating that 1O2 did not participate in the inactivation of M13 by UV-C irradiation under these conditions. These results indicated that UV-C irradiation induced not only CPD and (6-4)PP formation but also additional tertiary structural change in DNA inside the M13 virions, resulting in primary damage and a loss of infectivity. The indirect effect of UV-C irradiation such as 1O2 production followed by oxidative damage to nucleic acids and proteins might have contributed less, if at all, to the inactivation of M13 than the direct effect of UV-C.