Sensitive colorimetric assays for α-glucosidase activity and inhibitor screening based on unmodified gold nanoparticles

A colorimetric sensor has been developed in this work to sensitively detect α-glucosidase activity and screen α-glucosidase inhibitors (AGIs) utilizing unmodified gold nanoparticles (AuNPs). The sensing strategy is based on triple-catalytic reaction triggered by α-glucosidase. In the presence of α-glucosidase, aggregation of AuNPs is prohibited due to the oxidation of cysteine to cystine in the system. However, with addition of AGIs, cysteine induced aggregation of AuNPs occurs. Thus, a new method for α-glucosidase activity detection and AGIs screening is developed by measuring the UV–vis absorption or visually distinguishing. A well linear relation is presented in a range of 0.0025–0.05 U mL⁻¹. The detection limit is found to be 0.001 U mL⁻¹ for α-glucosidase assay, which is one order of magnitude lower than other reports. The IC₅₀ values of four kinds of inhibitors observed with this method are in accordance with other reports. The using of unmodified AuNPs in this work avoids the complicated and time-consuming modification procedure. This simple and efficient colorimetric method can also be extended to other enzymes assays.     

A synthetic route to highly substituted 1,2,3,4-tetrahydroisoquinolines via Yb(OTf)3 -catalyzed diastereoselective ring opening of bridged oxazolidines: asymmetric synthesis of 2-azapodophyllotoxin

We herein report a robust and efficient synthetic route to highly functionalized enantiopure 1,2,3,4-tetrahydroisoquinolines (THIQs) from Garner aldehyde. We utilized the inherent chirality of Garner aldehyde through 1,2- and 1,3-/1,4-asymmetric inductions iteratively to obtain 1,2,3,4-tetrasubstitued THIQs using rigid and isolable bridged oxazolidines without any external chiral sources. All possible stereoisomers of bridged oxazoliodines were efficiently synthesized from L- and D-Garner aldehydes and transformed into fully functionalized THIQs via diastereoselective ring opening with various nucleophiles in the presence of Yb(OTf)(3). This methodology furnished four out of eight possible diastereomers of 1,2,3,4-tetrasubstituted THIQs despite the electronic nature of substituents on the aryl rings. Finally, the enantioselective synthesis of 2-azapodophyllotoxin was achieved with an overall yield of 35.4% (eight steps) from D-Garner aldehyde using this synthetic route.     

Highly dispersed palladium(II) in a defective metal-organic framework: application to C-H activation and functionalization

High reversibility during crystallization leads to relatively defect-free crystals through repair of nonperiodic inclusions, including those derived from impurities. Microporous coordination polymers (MCPs) can achieve a high level of crystallinity through a related mechanism whereby coordination defects are repaired, leading to single crystals. In this work, we discovered and exploited the fact that this process is far from perfect for MCPs and that a minority ligand that is coordinatively identical to but distinct in shape from the majority linker can be inserted into the framework, resulting in defects. The reaction of Zn(II) with 1,4-benzenedicarboxylic acid (H(2)BDC) in the presence of small amounts of 1,3,5-tris(4-carboxyphenyl)benzene (H(3)BTB) leads to a new crystalline material, MOF-5(O(h)), that is nearly identical to MOF-5 but has an octahedral morphology and a number of defect sites that are uniquely functionalized with dangling carboxylates. The reaction with Pd(OAc)(2) impregnates the metal ions, creating a heterogeneous catalyst with ultrahigh surface area. The Pd(II)-catalyzed phenylation of naphthalene within Pd-impregnated MOF-5(O(h)) demonstrates the potential utility of an MCP framework for modulating the reactivity and selectivity of such transformations. Furthermore, this novel synthetic approach can be applied to different MCPs and will provide scaffolds functionalized with catalytically active metal species.     

Determination of melamine in milk powder using gas chromatography-high-resolution isotope dilution mass spectrometry

A GC-high-resolution isotope dilution MS (IDMS) method for the quantification of melamine in milk powder is described. The developed technique is compared to the LC-IDMS/MS technique, typically used for the determination of melamine in various matrices. The accuracy of the GC-high-resolution IDMS method was demonstrated when a small degree of equivalence was obtained in a regional comparative study involving the determination of melamine in milk powder.     

Improved inhomogeneous Strichartz estimates for the Schrödinger equation

We study inhomogeneous Strichartz estimates for the Schrödinger equation for dimension n?3. Using a frequency localization, we obtain some improved range of Strichartz estimates for the solution of inhomogeneous Schrödinger equation except dimension n=3.     

One-pot synthesis of Cu1.94S-CdS and Cu1.94S-Zn(x)Cd(1-x)S nanodisk heterostructures

Nanodisk heterostructures consisting of monoclinic Cu(1.94)S and wurtzite CdS have been colloidally synthesized for the first time. Initially, hexagonal-shaped nanodisks of Cu(1.94)S were produced upon thermolysis of a copper complex in a solvent mixture of HDA and TOA at 250 °C. Rapid addition of Cd precursor to the reaction mixture resulted in the partial conversion of Cu(1.94)S into CdS, yielding Cu(1.94)S-CdS nanoheterostructures. The original morphology of the Cu(1.94)S nanodisks was conserved during the transformation. When Zn precursor was added together with the Cd precursor, Cu(1.94)S-Zn(x)Cd(1-x)S nanodisks were generated. These two-component nanostructures are potentially useful in the fabrication of heterojunction solar cells.     

Graft copolymer directed synthesis of micron-thick organized mesoporous TiO2 films for solid-state dye-sensitized solar cells

Micron thick, well-organized mesoporous TiO(2) films with high porosity and good connectivity were synthesized by templating an amphiphilic graft copolymer for solid-state dye-sensitized solar cells.     

Kinetics of nanoconfined benzyl methacrylate radical polymerization

The effect of nanoconfinement on the kinetics of benzyl methacrylate radical polymerization is investigated using differential scanning calorimetry. Controlled pore glass (CPG), ordered mesoporous carbons, and mesoporous silica are used as confinement media with pore sizes from 2 to 8 nm. The initial polymerization rate in CPG and mesoporous silica increases relative to the bulk and increases linearly with reciprocal pore size; whereas, the rate in the carbon mesopores decreases linearly with reciprocal pore size; the changes are consistent with the rate being related to the ratio of the pore surface area to pore volume. Induction times are longer for nanoconfined polymerizations, and in the case of CPG and carbon mesopores, autoacceleration occurs earlier, presumably due to the limited diffusivity and lower termination rates for the confined polymer chains. The molecular weight of the polymer synthesized in the nanopores is generally higher than that obtained in the bulk except at the lowest temperatures investigated. The equilibrium conversion under nanoconfinement decreases with decreasing temperature and with confinement size, exhibiting what appears to be a floor temperature at low temperatures.     

Small and high-density GeSiC dots stacked on buried Ge hut-clusters in Si

Self-assembled GeSiC dots stacked on a Ge hut-cluster layer buried in Si have been investigated. The critical thickness for formation of GeSiC dots is reduced owing to the strain fields from the buried hut-clusters. By utilizing the stacked structure, the dot size is decreased and the uniformity is improved. The highest density of the GeSiC dots with stacked structures is 7.4×10¹⁰ cm⁻², which is six times larger than that of single GeSiC dots. The formation of the self-assembled GeSiC dots is strongly influenced by being stacked with buried Ge dots as well as C incorporation.