Bis induces growth inhibition and differentiation of HL-60 cells via up-regulation of p27

Bis (Bag-3, CAIR), a Bcl-2-interacting protein, promotes the anti-apoptotic activity of Bcl-2 and increased levels of Bis have been observed in several disease models. The involvement of Bcl-2 and some Bcl-2-binding proteins in differentiation has recently been reported. However, the relevance of Bis to cellular differentiation remains unknown. The findings herein show that Bis expression is up-regulated during the differentiation of HL-60 cells. To investigate the effect of Bis expression on differentiation, we established Bis-overexpressing HL-60 cells (HL-60-bis). HL-60-bis cells have a low nuclear: cytoplasmic ratio and indented nucleus in Wright- Giemsa staining, and an increased expression of CD11b in immunofluorescence study, indicating the promotion of differentiation. The overexpression of Bis also resulted in a retarded cell growth rate, accompanied by the accumulation of HL-60 cells at the G0/G1 phase of the cell cycle, which was sustained during the differentiation process. Western blot analysis revealed that the expression of p27, a representative inducer of cell cycle arrest at the G1 phase, was increased 2.5-fold in HL-60-bis cells compared to HL-60-neo cells. These results suggest that the Bis induced growth inhibition of HL-60 cells promotes G0/G1 phase arrest via up-regulation of p27, which seems to be a prerequisite for differentiation. Further studies will be required to define the exact roles of Bis on cellular differentiation more precisely.     

Langmuir monolayers of Co nanoparticles and their patterning by microcontact printing

In this paper, we describe an easy and reliable method for the production of patterned monolayers of Co nanoparticles. A two-dimensional monolayer of Co nanoparticles is fabricated by spreading a nanoparticle solution over an air-water interface and then transferring it to a hydrophobic substrate by using the Langmuir-Blodgett (LB) method. Transmission electron microscopy (TEM) was used to show that, with increasing surface pressure, the Co nanoparticles become well-organized into a Langmuir monolayer with a hexagonal close-packed structure. By controlling the pH of the subphase, it was found that a monolayer of Co nanoparticles with long-range order could be obtained. Further, by transferring the Langmuir monolayer onto a poly(dimethoxysilane) (PDMS) mold, the selective micropatterning of the Co nanoparticles could be achieved on a patterned electronic circuit. The electronic transport properties of the Co nanoparticles showed the ohmic I-V curve.     

Micropatterning of semicrystalline poly(vinylidene fluoride) (PVDF) solutions

Micropatterning of a semicrystalline poly(vinylidene fluoride) (PVDF) solution was performed by a temperature controlled capillary micromolding where the rate of solvent evaporation was controlled by substrate temperature. In order to choose proper solvents for micropatterning, we have investigated the solubility of PVDF in various organic solvents and crystal structures of the PVDF bulk films cast from the solvents. The films prepared from the polar solvents such as dimethylformamide (DMF), dimethyl sulfoxide (DMSO) dominantly showed γ type crystals regardless of preparation temperature, while the films from tetrahydrofuran (THF) exhibit α type crystals and the ones from acetone and methyl ethyl ketone (MEK) show the characteristics of both α- and γ-PVDF. The quality of micropatterns and shapes of the PVDF crystals in the patterns significantly depend on solvent evaporation rates. Micropatterns of PVDF formed in DMF at 120 °C showed the best uniformity in shape. Crystals of the PVDF nucleated at the center regions of microchannels tended to be elongated with the b-axis of γ-PVDF crystals along the channels as the concentration of the solution decreased. In contrast, crystals nucleated at the corner regions of the channels had their b-axis oriented perpendicular to the channels. In line patterns with the width of 2 μm, the corner nucleated crystals were dominant and a resulting bamboo-like crystalline microstructure was observed in which the b-axis of γ-PVDF crystals, fast growth direction, is oriented normal to the microchannels. The crystal structures of the bulk films and the micropatterns were characterized by X-ray diffractometer, Fourier transform infrared spectroscope in Attenuated Total Reflection mode, Polarized Optical and Scanning Electron Microscope.     

Two-phase flow pressure change subject to sudden contraction in small rectangular channels

This study investigates the pressure change and flow pattern subject to the influence of sudden contractions. The air and water mixture flows from small rectangular channels (2 × 4, 2 × 6, 4 × 4 and 4 × 6 mm, respectively) into a 2 mm diameter tube. The total mass flux (G) ranges from 100 to 700 kg/m² s with gas quality (x) being varied from 0.001 to 0.8. In general the contraction pressure change increases with the rise of mass flux, and gas quality but an unique deflection of contraction pressure change pertaining to liquid vena contracta at a very low gas quality is encountered at a very low gas quality in the 4 ± 6 mm test section. For a low gas quality, elongated bubble prevails after the contraction, yet the size of elongated bubbles is reduced when the aspect ratio is increased. Comparisons amid the pressure change data of this study and available literature data with the predictions of existing model/correlations indicate that none of them can accurately predict the data. It is found that the influence of surface tension and outlet tube size, or equivalently the Bond number plays a major role for the departure of various models/correlations. Among the models/correlations being examined, the homogeneous model shows a little better than the others. Hence by taking account the influences of gas quality, Bond number, Weber number and area contraction ratio into the homogeneous model, a modified homogeneous correlation is proposed that considerably improves the predictive ability over existing correlations with a mean deviation of 30% to all the data.     

Palladium-Catalyzed Regioselective Synthesis of 3-Arylindoles from N-Ts-Anilines and Styrenes

A Pd-catalyzed intermolecular oxidative annulation between N-Ts-anilines and styrenes was developed. This method offers a straightforward and robust approach to a wide range of 3-arylindoles using readily available starting materials with good functional-group tolerance and high regioselectivity and efficiency. Further elaboration of the products obtained from this process provided access to highly functionalized and structurally diverse indoles, for example, 3-(indol-3-yl)carbazoles, 1,9-dihydropyrrolo-[2,3-b]carbazoles, and 3′-aryl-3,5′-biindoles.     

Solution-based TiO2-polymer composite dielectric for low operating voltage OTFTs

The cross-linking reaction of a TiO(2)-polymer composite (TPC) dielectric with poly(4-vinyl phenol) (PVP), a TiO(2) precursor, and poly(melamine-co-formaldehyde) is demonstrated: We suggest that the dense chemical structure of TPC is caused by the alkoxyl group of the PVP cross-linker, poly(melamine-co-formaldehyde) methylated/butylated, reacted with the hydroxyl group of the PVP and the ligands of the TiO(2) precursor.     

Integrated chemical process for exothermic wave synthesis of high luminance YAG:Ce phosphors

In this paper, high-luminance yellow-emitting Y₃Al₅O₁₂:Ce³⁺ phosphor (YAG:Ce) microparticles were prepared in a solid flame using a 1.425Y₂O₃+2.5Al₂O₃+0.15CeO₂+k(KClO₃+urea)+mNH₄F precursor mixture (here k is the number of moles of the KClO₃+urea red-ox mixture, and m is the number of moles of NH₄F). The self-sustaining combustion process for the entire reaction sample was provided by the heat generated from the KClO₃+urea mixture. Parametric studies demonstrated that the maximum temperature in the combustion wave varied from 885 to 1200 °C for k=2.0-3.0 mole and m=0-1.5 mole. X-ray analysis results showed that the product obtained in the solid flame consisted of Y₃Al₅O₁₂:Ce³⁺ and KCl phases. Therefore, after dissolving potassium chloride in distillated water, pure-phase YAG:Ce phosphor powder was obtained. The as-prepared YAG:Ce phosphor particles had diameters of 10-25 μm and good dispersity and exhibited luminescence properties comparable to those of YAG:Ce phosphor powders prepared by conventional high-temperature processing.     

Instability of one-dimensional dangling-bond wires on H-passivated C(001), Si(001), and Ge(001) surfaces

We investigate the instability of one-dimensional dangling-bond (DB) wires fabricated on the H-terminated C(001), Si(001), and Ge(001) surfaces by using density-functional theory calculations. The three DB wires are found to show drastically different couplings between charge, spin, and lattice degrees of freedom, resulting in an insulating ground state. The C DB wire has an antiferromagnetic spin coupling between unpaired DB electrons, caused by strong electron–electron interactions, whereas the Ge DB wire has a strong charge-lattice coupling, yielding a Peierls-like lattice distortion. For the Si DB wire, the antiferromagnetic spin ordering and the Peierls instability are highly competing with each other. The physical origin of such disparate features in the three DB wires can be traced to the different degree of localization of 2p, 3p, and 4p DB orbitals.