Zinc Porphyrins with a Pyridine‐Ring‐Anchoring Group for Dye‐Sensitized Solar Cells

Anchoring groups are extremely important in controlling the performance of dye‐sensitized solar cells (DSCs). The design and characterization of sensitizers with new anchoring groups, in particular non‐carboxylic acid groups, has become a recent focus of DSC research. Herein, new donor? π? acceptor zinc? porphyrin dyes with a pyridine ring as an anchoring group have been designed and synthesized for applications in DSCs. Photophysical and electrochemical investigations demonstrated that the pyridine ring worked effectively as an anchoring group for the porphyrin sensitizers. DSCs that were based on these new porphyrins showed an overall power‐conversion efficiency of about 4.0 % under full sunlight (AM 1.5G, 100 mW cm^?2).     

A new three‐dimensional silver(I) coordination framework with a diamondoid topology constructed from 2‐(pyridin‐4‐yl)‐1H‐imidazole‐4,5‐dicarboxylic acid

The title compound, poly[[μ₄‐5‐carboxy‐4‐carboxylato‐2‐(pyridin‐4‐yl)‐1H‐imidazol‐1‐ido]disilver(I)], [Ag₂(C₁₀H₅N₃O₄)]_n, was synthesized by reacting silver nitrate with 2‐(pyridin‐4‐yl)‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃PyIDC) under hydrothermal conditions. The asymmetric unit contains two crystallographically independent Ag^I cations and one unique HPyIDC²⁻ anion. Both Ag^I cations are three‐coordinated in distorted T‐shaped coordination geometries. One Ag^I cation is coordinated by one N and two O atoms from two HPyIDC²⁻ anions, while the other is bonded to one O and two N atoms from two HPyIDC²⁻ anions. It is interesting to note that the HPyIDC²⁻ group acts as a μ₄‐bridging ligand to link the Ag^I cations into a three‐dimensional framework, which can be simplified as a diamondoid topology. The thermal stability and photoluminescent properties of the title compound have also been studied.     

Development of a rapid method for the simultaneous separation and determination of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol and its N- and O-glucuronides in human urine by liquid chromatography–tandem mass spectrometry

Determination of the tobacco-specific nitrosamine metabolite 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL) and its N- and O-glucuronides (NNAL-N-Gluc and NNAL-O-Gluc) is important for toxicology analysis of tobacco smoke induced carcinogenicity and the understanding of detoxification mechanisms of the carcinogenic nitrosamine in humans. But previously reported indirect measurement methods involving enzymolysis and base treatment steps were tedious and time-consuming. In this work, a direct measurement method for simultaneous determination of urinary NNAL, NNAL-N-Gluc and NNAL-O-Gluc by liquid chromatography–tandem mass spectrometry (LC–MS/MS) in a single run was developed for the first time without the need to perform enzymatic or base hydrolysis. Urine samples were purified using dichloromethane and further extracted by solid-phase extraction. Then they were analyzed by LC–MS/MS operated in electrospray positive ionization mode. Chromatographic separation was achieved on a Phenomenex Kinetex PFP column within 6 min. The proposed method was validated and the results demonstrated that the method can produce satisfactory recoveries and reproducibility for the analytes. The applicability of this newly developed method was investigated for the simultaneous analysis of the three metabolites in smokers’ urine and the obtained results were comparable to those detected using the conventional enzymolysis method.     

Construction of microscale structures in enclosed microfluidic networks by using a magnetic beads based method

A large number of microscale structures have been used to elaborate flowing control or complex biological and chemical reaction on microfluidic chips. However, it is still inconvenient to fabricate microstructures with different heights (or depths) on the same substrate. These kinds of microstructures can be fabricated by using the photolithography and wet-etching method step by step, but involves time-consuming design and fabrication process, as well as complicated alignment of different masters. In addition, few existing methods can be used to perform fabrication within enclosed microfluidic networks. It is also difficult to change or remove existing microstructures within these networks. In this study, a magnetic-beads-based approach is presented to build microstructures in enclosed microfluidic networks. Electromagnetic field generated by microfabricated conducting wires (coils) is used to manipulate and trap magnetic beads on the bottom surface of a microchannel. These trapped beads are accumulated to form a microscale pile with desired shape, which can adjust liquid flow, dock cells, modify surface, and do some other things as those fabricated microstructures. Once the electromagnetic field is changed, trapped beads may form new shapes or be removed by a liquid flow. Besides being used in microfabrication, this magnetic-beads-based method can be used for novel microfluidic manipulation. It has been validated by forming microscale dam structure for cell docking and modified surface for cell patterning, as well as guiding the growth of neurons.     

Resonant-Mie-scattering of aggregates of phosphomolybdate and papaverine for measuring activities and screening inhibitors of cyclic nucleotide phosphodiesterase isozymes

A resonant-light-scattering (RLS) method was proposed to quantify phosphate for screening inhibitors of isozymes of cyclic nucleotide phosphodiesterase (PDE). In acidified mixtures of phosphate, papaverine and molybdate, there were aggregates exhibiting micrometre sizes, no absorbance peaks over 360 nm but strong RLS peaks at 392 nm; Mie scattering thus accounted for the RLS signals. When papaverine was added before molybdate to acidified samples of phosphate, RLS signals at 392 nm were stable from 5 to 25 min since the addition of molybdate; after optimization, phosphate from 0.40 to 3.60 μM was quantifiable. This RLS method tolerated 60 mg L⁻¹ proteins besides common PDE inhibitors and dimethyl sulfoxide in acidified samples of phosphate; the integration of this RLS method with the coupled action of a phosphomonoesterase on PDE product was thus rational to measure PDE activities without the removal of proteins in samples. By quantifying activities of a truncated mutant of human PDE4B2 via this RLS method, Michaelis–Menten constant, inhibition constants of rolipram, papaverine and theophylline varied over three magnitudes and were consistent with those estimated by an improved malachite green assay of phosphate, respectively. Hence, this novel RLS method was promising for screening inhibitors of PDE isozymes.     

Study of Chiral Ionic Liquid as Stationary Phases for GC

Due to the synthetic flexibility and special enantioselectivity, chiral ionic liquids (CILs) have heightened interest and an increasing number of CILs has been designed and utilized. In this work, CIL named l-1-butyl-3-(2-propionic-1-ether) imidazolium bromide ([BAlaIM]Br) derived from natural amino acids was synthesized, with chiral center at cation moiety. Chiral stationary phases for gas chromatography were then prepared by mixing the CIL with polymeric ionic liquid ([PSOMIM][NTf₂], homemade) at different ratios (4:1, 2:1, and 1:1). The column efficiency was measured to be about 3,200 plates m^?1 (8 m × 0.25 mm i.d.) when the content of [BAlaIM]Br was 50 % (mass percent) in the mixed stationary phase. All columns were coated via the static coating method using 0.30 % (w/v) of stationary phases dissolved in methanol. The results showed that the CIL contributed to the selectivity of stationary phase toward positional isomers dichlorobenzenes, methylnaphthalenes and pinenes, etc. Meanwhile, [BAlaIM]Br showed better selectivity for enantiomers such as carvones, citronellals, limonenes and camphors. The interactions between chiral selector and enantiomers were also discussed.     

Development of a Sensitive Method for the Determination of 4‐(Methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanol in Human Urine Using Solid‐phase Extraction Combined with Ultrasound‐assisted Dispersive Liquid–liquid Microextraction and LC‐MS/MS Detection

An efficient and sensitive analytical method based on molecularly imprinted solid‐phase extraction (MISPE) and reverse‐phase ultrasound‐assisted dispersive liquid–liquid microextraction (USA‐DLLME) coupled with LC–MS/MS detection was developed and validated for the analysis of urinary 4‐(methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanol (NNAL), a tobacco‐specific nitrosamine metabolite. The extraction performances of NNAL on three different solid‐phase extraction (SPE) sorbents including the hydrophilic‐lipophilic balanced sorbent HLB, the mixed mode cationic MCX sorbent and the molecularly imprinted polymers (MIP) sorbent were evaluated. Experimental results showed that the analyte was well retained with the highest extraction recovery and the optimum purification effect on MIP. Under the optimized conditions of MIP and USA‐DLLME, an enrichment factor of 23 was obtained. Good linearity relationship was obtained in the range of 5‐1200 pg/mL with a correlation coefficient of 0.9953. The limit of detection (LOD) was 0.35 pg/mL. The recoveries at three spiked levels ranged between 88.5% and 93.7%. Intra‐ and inter‐day relative standard deviations varied from 3.6% to 7.4% and from 5.4% to 9.7%, respectively. The developed method combing the advantages of MISPE and DLLME significantly improves the purification and enrichment of the analyte and can be used as an effective approach for the determination of ultra‐trace NNAL in complex biological matrices.     

(Δ)[Fe(II)(phen)3]2+ Filled in the Chiral Cavitiy Constituted by {(Δ)[Fe(III)(C2O4)3](NH42+)(DMF)(H2O)32−}n

A chiral coordination compound {(Δ)[Fe(II)(phen)₃][(Δ)Fe(III)(C₂O₄)₃](NH₄)(H₂O)₃(DMF)}_n (phen = 1,10‐phenanthroline), (DMF = N,N'‐Dimethylformamide), has been synthesized, and the structure has been revealed by infrared spectroscopy and X‐ray single‐crystal diffraction. The framework consists of two chiral subunits. One subunit (Δ)[(Fe(III)(C₂O₄)₃]^3? which as host anion forms a chiral porous three‐dimensional supermolecular network with lattice water, lattice DMF and lattice ammonium cation through hydrogen bonds. And then the other is Δ[Fe(II)(phen)₃]²⁺ which as guest cation fills in the chiral cavity located in the previously mentioned host porous network.     

Design,Synthesis, and Antifungal Activities of New β‐Methoxyacrylate Analogues

Strobilurins have become one of the most important classes of agricultural fungicides. To search for new strobilurin derivatives with high activity against resistant pathogens, a series of new β‐methoxyacrylate analogues containing substituted pyrimidine in the side chain with strobilurin pharmacophore were synthesized and their biological activities were tested. The compounds were confirmed and characterized by ¹H‐NMR, elemental analysis and mass spectroscopy. The bioassays indicated that most of the compounds 1 exhibited potent antifungal activities against Colletotrichum orbiculare, Botrytis cinerea Pers and Phytophthora capsici Leonian at a concentration of 50 μg mL^?1. Notably, compound 1b (R = 2,5‐dimethylphenyl) showed better antifungal activity against all the tested fungi than the commercial strobilurin fungicide azoxystrobin.