Cr2O3和CrO3/Cr2O3催化剂的2-氯-1,1,1-三氟乙烷气相氟化反应的活性物种和失活

采用沉淀法和浸渍法制备了2种铬基（Cr₂O₃和CrO₃/Cr₂O₃）催化剂,用于气相氟化2-氯-1,1,1-三氟乙烷合成1,1,1,2-四氟乙烷。研究发现含有低价铬（Cr³⁺）物种的Cr₂O₃催化剂上2-氯-1,1,1-三氟乙烷的稳态转化率为18.5%,而含有高价铬（Cr⁶⁺）物种和低价铬（Cr³⁺）物种的CrO₃/Cr₂O₃催化剂初始转化率达到30.6%,然而存在明显的失活。含有Cr⁶⁺物种的CrO₃/Cr₂O₃催化剂的2-氯-1,1,1-三氟乙烷氟化反应初始TOF值为1.71×10^-4 mol_HCFC-133a·mol_Cr（Ⅵ）^-1·s^-1,高于含有Cr³⁺物种的Cr₂O₃催化剂（4.16×10^-5 mol_HCFC-133a·mol_Cr（Ⅲ）^-1·s^-1）。Cr₂O₃催化剂在氟化反应前后催化剂的物相结构保持不变;而含有高价铬物种的CrO₃/Cr₂O₃催化剂经HF反应后生成了CrO_xF_y活性物种。然而,CrO_xF_y物种在反应中挥发或转化成稳定但无活性的CrF₃,从而导致催化剂失活。     

MoO42-取代对Nasicon型Li3Fe2(PO4)3正极材料电化学性能的影响

以MoO₄^2-部分取代Li₃Fe₂（PO₄）₃中的PO₄^3-,研究表明：加入的MoO₄^2-离子主要以固溶形式存在于Li₃Fe₂（PO₄）₃中,起到了显著改善其电化学性能的作用。其中,MoO₄^2-掺杂浓度为0.3的样品表现出最佳的电化学性能,其在0.5C倍率下的首次放电容量为113.7 mAh·g^-1,这一数值比未掺杂的提高了20.7%;经过60次循环充放电,容量保持率为94%。将放电倍率从0.5C逐步增大至5C,再降至初始的0.5C,并在每个倍率循环10次,这一材料的最终放电容量可达首次0.5C的95%。这些优异的性能应归因于MoO₄^2-掺杂使材料的氧化还原能力增强,氧化还原电对的电势差减小,电池内部的电荷转移电阻减小,以及Li⁺扩散系数增加。     

燃料电池铂钴锰合金催化剂的制备及性能

为提高PtCo/C合金催化剂的电化学性能,采用微波法合成铂钴锰催化剂前驱体,经高温热处理形成合金,最后通过酸处理得到铂钴锰合金催化剂(PtCoMn/C)。电化学测试结果表明:适量锰的添加可提升PtCo/C催化剂的活性和耐久性。PtCoMn/C催化剂在 0.9 V(vs RHE)电压下的质量比活性(MA)达到 0.666 A·mg_Pt^-1,是传统 Pt/C 的 2.66 倍,是 PtCo/C 催化剂的 1.30 倍。在30 000圈催化剂加速耐久性测试中,PtCoMn/C合金催化剂的电化学活性面积(ECSA)和质量比活性(MA)仅下降6.9%和27.1%,均远低于Pt/C催化剂。     

Neamine-heterocycle conjugates as potential anti-HIV agents

A series of neamine-heterocycle conjugates were designed and synthesized. All new compounds displayed more potent inhibitory effect on HIV replication than neamine, among them two compounds displayed stronger anti-HIV activity than neomycin B. The results suggested that itmight be a promising approach to modify neamine for the discovery of new anti-HIV agents.     

NiCF/ABS复合材料的制备及电磁屏蔽效能研究

探讨了碳纤维(CF)表面镍金属的化学镀工艺,制备了镀镍碳纤维(NiCF),采用密炼工艺制备了ABS基体复合材料,研究了CF和NiCF含量对复合材料的导电性能及电磁屏蔽效能的影响。结果表明:采用化学镀的方法在碳纤维表面镀覆了金属镍,所形成的镀层均匀致密;镀覆时间为5min时,镀镍后的碳纤维电阻率降低两个数量级;复合材料电阻率随CF、NiCF含量的增加而逐渐减小;复合材料电磁屏蔽效能随CF、NiCF含量的增加而逐渐增加,当NiCF含量为25%(wt)(约13.3vol%)时,电磁屏蔽效能最高可达51dB。     

Preparation of Polymer-Functionalized Iron Oxide Nanoparticles and Their Biomedical Properties

Superparamagnetic iron oxide nanoparticles with narrow size distributions were successfully prepared in large scale by a facile one‐pot synthetic method in the presence of hydrophilic polymers, such as polyethylene glycol diacid (HOOC‐PEG‐COOH) and poly(acrylic acid) (PAA). The as‐prepared products were investigated in detail by powder X‐ray diffraction (XRD), thermogravimetric analyses (TGA), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), dynamic light scattering (DLS), and vibrating sample magnetometer (VSM). The interaction between polymers and iron oxide nanoparticles was investigated using Fourier transform infrared spectrometry (FT‐IR). The results show that polymers can be attached onto the surface of iron oxide nanoparticle by bridging coordination and monodentate fashion, respectively. The interaction affects iron oxide nanoparticle properties significantly, such as XRD diffraction intensity, hydrodynamic diameter, isoelectric point, and saturation magnetization. Furthermore, the results of in vitro experiments indicated that iron oxide‐PEG‐COOH nanoparticle is more cytotoxic than iron oxide‐PAA nanoparticle due to different coordinating modes.     

Triazole and Benzotriazole Derivatives as Novel Inhibitors for p90 Ribosomal S6 Protein Kinase 2： Synthesis, Molecular Docking and SAR Analysis

A series of triazole and benzotriazole derivatives as novel p90 ribosomal S6 protein kinase 2 （RSK2） inhibitors were designed and synthesized. The in vitro activities against RSK2 were evaluated, and among 14 compounds, compounds 5, 6, 11, 12, 13 and 14 exhibited enzyme IC50 values of 8.91, 2.86, 3.19, 3.05, 4.49 and 2.09 μmol/L re- spectively. The proposed binding modes were simulated using molecular docking method, and the docking results coupled with the stmcture-activi1：y relationship （SAR） analysis indicated that all these active compounds bound to the RSK2 ATP binding site at NTKD, and the electron-donating groups on the 4-position of phenyl were the deter- minant point for the inhibitory activity.     

开放骨架磷酸铝AlPO4-12的晶化过程

以乙二胺为结构导向剂,在200℃加热物质的量组成为nAl₂O₃:nP₂O₅:n_en:nH₂O=1:1:2:226的初始混合物(en=乙二胺),合成了三维开放骨架磷酸铝化合物AlPO₄-12。用X-射线衍射、元素分析、pH测量、液体核磁共振以及电喷雾质谱研究了其晶化过程。依据质谱数据,开发了一个系统枚举在晶化过程中可能生成的小结构单元分子式的方法。研究发现在AlPO₄-12的晶化过程中经历了层状磷酸铝UiO-15和UiO-13中间相,液相中Al物种的浓度极低,在晶化过程中生成的小结构单元中P-OH逐渐增多,乙二胺分子逐渐质子化,在晶化过程中生成了磷酸铝的4元环和6元环。用电喷雾质谱研究晶化过程中的液相可以获得小结构单元的结构和组成信息。     

异烟酰肼缩2-乙酰吡啶稀土配合物的制备、晶体结构及抗肿瘤活性

合成并通过元素分析,红外和X-射线单晶衍射表征了3个稀土配合物[Ln(HL)(NO₃)₃(CH₃OH)₂](Ln=La, 1; Ce,2)和[Nd(HL)(NO₃)₃(H₂O)]CH₃OH(3)(HL=2-吡啶酰肼缩2-乙酰吡啶)。在同构配合物1和2中,中心金属离子与提供N₂O配位原子的HL配体,3个双齿配位的硝酸根和2个甲醇分子配位,形成十一配位的单帽五角反棱柱配位构型。在配合物3中,中心金属离子采用十配位的模式与N₂O配位构型的HL配体、3个双齿配位的硝酸根和1个水分子形成双帽四方反棱柱配位构型。2个配合物对人肠癌细胞Lovo,人胃癌细胞BGC823和SGC7901展现出显著的抗肿瘤活性。     

Na_3PO_4·12H_2O选择性催化脱去芳香性叔丁基二甲基硅醚

报道了以磷酸盐为催化剂选择性脱去芳香性叔丁基二甲基硅醚的方法.以DMF为溶剂,室温下在0.5质量分数的Na3PO4.12H2O催化下,能顺利地脱去芳香性叔丁基二甲基硅醚得到相应的酚类化合物,而不影响其他的保护基和官能团.