Donnan equilibrium of ionic drugs in pH-dependent fixed charge membranes: theoretical modeling

We have studied theoretically the partition equilibrium of a cationic drug between an electrolyte solution and a membrane with pH-dependent fixed charges using an extended Donnan formalism. The aqueous solution within the fixed charge membrane is assumed to be in equilibrium with an external aqueous solution containing six ionic species: the cationic drug (DH(+)), the salt cations (Na(+) and Ca(2+)), the salt anion (Cl(-)), and the hydrogen and hydroxide ions. In addition to these mobile species, the membrane solution may also contain four fixed species attached to the membrane chains: strongly acid sulfonic groups (SO(3)(-)), weakly acid carboxylic groups in dissociated (COO(-)) and neutral (COOH) forms, and positively charged groups (COO...Ca(+)) resulting from Ca(2+) binding to dissociated weakly acid groups. The ionization state of the weak electrolyte groups attached to the membrane chains is analyzed as a function of the local pH, salt concentration, and drug concentration in the membrane solution, and particular attention is paid to the effects of the Ca(2+) binding to the negatively charged membrane fixed groups. The lipophilicity of the drug is simulated by the chemical partition coefficient between the membrane and external solutions giving the tendency of the drug to enter the membrane solution due to hydrophobic interactions. Comparison of the theoretical results with available experimental data allows us to explain qualitatively the effects that the pH, salt concentration, drug concentration, membrane fixed charge concentration, and Ca(2+) binding exert on the ionic drug equilibrium. The role of the interfacial (Donnan) electric potential difference between the membrane and the external solutions on this ionic drug equilibrium is emphasized throughout the paper.     

Group method approach to the estimation of response factors of unavailable substances in quantitative gas chromatography

The method's accuracy of a compound quantitation by chromatography depends on the calibration procedure with a pure standard of the target analyte, if the latter is unavailable uncertainty is unavoidable. The group method is a different approach in GC quantitative analysis that shows a practicable way for avoiding this uncertainty and accurately quantify a mixture containing one or more unavailable components. This paper is concerned with the definition of the group method quantitative parameters, the application procedures for their calculation, the determination of the quantitative proportion of a group of unavailable components of a mixture and the partial or total quantitation of the latter. The paper also describes the steps for carrying out the so-called group-correlation method in the determination of the response factors of unavailable compounds, which belong to a homologous series. The GC experimental corroboration of the group method approach employing model mixtures of compounds is also presented.     

Unexpected formation of 1-diethylaminobutadiene in photosensitized oxidation of triethylamine induced by 2,3-dihydro-oxoisoaporphine dyes. A 1H NMR and isotopic exchange study

[reaction: see text] Photoreduction of oxoisoaporphine dyes occurs via a stepwise mechanism of electron-proton-electron transfer that leads to the N-hydrogen oxoisoaporphine anion. When triethylamine, TEA, was used as the electron donor in anaerobic conditions, 1-diethylaminobutadiene, DEAB, was one of the oxidation products of TEA, among diethylamine and acetaldehyde. DEAB was identified by (1)H NMR and GC-MS experiments by comparison with the authentic 1-diethylaminobutadiene. This is the first report of a butadienyl derivative formed in the dye-sensitized photooxidation of TEA. In addition, isotopic exchange experiments with TEA-d(15) and D(2)O show that the hydrogens at carbon-2 and carbon-4 of the butadienyl moiety are exchangeable. The observed isotopic exchange pattern could be explained by the head-to-tail coupling of an N,N-diethylvinylamine intermediate that exchanges hydrogens at the C-beta via the enammonium ion.     

The solubilization of alcohols in micellar solutions

The specific conductivities of dodecyldimethylbenzylammonium bromide (C12BBr) have been determined in aqueous butanol and aqueous benzyl alcohol solutions in the temperature range of 5-40°C. From these data the temperature dependent critical micelle concentration (cmc) was determined. The molar fraction of alcohol in the micelle was estimated using the theory suggested by Motomura et al. for surfactant binary mixtures. The thermal properties such as standard Gibbs free energy, enthalpy and entropy of solubilization of alcohols in the micelles were estimated for the phase separation model. The change in heat capacity upon solubilization of alcohol in the micelle has been estimated form the above properties. This revised version was published online in July 2006 with corrections to the Cover Date.     

Derivatives of 2-thiohydantoin as spectrophotometric analytical reagents. III

Summary The synthesis, characteristics, properties and reactions with metallic ions of the furfural-, thiophenal-, pyrrolal-, cinnamal-, acetal-, and propional-derivatives of 2-thiohydantoin have been studied. The reagents exhibit twopK values in aqueous solution, and sensitive colour reactions with Pd(II), Cu(I) and (II), Ag(I) and Hg(II). A comparison has been made of the reactivity of all the 2-thiohydantoin derivatives we have studied to date and conclusions have been drawn regarding the influence of the aromatic ring connected to 2-thiohydantoin.

---

Derivative des 2-Thiohydantoins als spektrophotometrische Reagenzien. III

Zusammenfassung Die Synthese, die Kennzahlen, die Eigenschaften der Furfural-, Thiophenal-, Pyrrolal-, Acetal-, Propional- sowie des Zimtsäurealdehyd-Derivates des 2-Thiohydantoins und deren Reaktionen mit Metallionen wurden untersucht. In wäßriger Lösung kommen diesen Reagenzien zwei pK-Werte zu. Sie geben empfindliche Farbreaktionen mit Pd(II), Cu(I) und (II), Ag(I) und Hg(II). Die Reaktivität der genannten Derivative wurde untersucht und der Einfluß des mit 2-Thiohydantoin verbundenen aromatischen Ringes daraus ermittelt.

     

(Fluoren-9-ylidene)methanedithiolato complexes of platinum: synthesis, reactivity, and luminescence

Platinum(II) complexes with (fluoren-9-ylidene)methanedithiolato and its 2,7-di-tert-butyl- and 2,7-dimethoxy-substituted analogues were obtained by reacting different chloroplatinum(II) precursors with the piperidinium dithioates (pipH)[(2,7-R2C12H6)CHCS2] [R = H (1a), t-Bu (1b), or OMe (1c)] in the presence of piperidine. The anionic complexes Q2[Pt{S(2)C=C(C12H6R(2)-2,7)}2] [R = H, (Pr(4)N)(2)2a; R = t-Bu, (Pr4N)(2)2b, (Et4N)(2)2b; R = OMe, (Pr4N)(2)2c] were prepared from PtCl(2), piperidine, the corresponding QCl salt, and 1a-c in molar ratio 1:2:2:2. In the absence of QCl, the complexes (pipH)(2)2b and [Pt(pip)(4)]2b were isolated depending on the PtCl(2):pip molar ratio. The neutral complexes [Pt{S2C=C(C12H6R(2)-2,7)L(2)] [L = PPh(3), R = H (3a), t-Bu (3b), OMe (3c); L = PEt(3), R = H (4a), t-Bu (4b), OMe (4c); L(2) = dbbpy, R = H (5a), t-Bu (5b), OMe (5c) (dbbpy = 4,4'-di-tert-butyl-2,2'-bipyridyl)] were similarly prepared from the corresponding precursors [PtCl2L2] and 1a-c in the presence of piperidine. Oxidation of Q(2)2b with [FeCp2]PF6 afforded the mixed Pt(II)-Pt(IV) complex Q2[Pt2{S2C=C[C12H6(t-Bu)(2)-2,7]}4] (Q(2)6, Q = Et4N+, Pr4N+). The protonation of (Pr4N)(2)2b with 2 equiv of triflic acid gave the neutral dithioato complex [Pt2{S2CCH[C12H6(t-Bu)(2)-2,7]}4] (7). The same reaction in 1:1 molar ratio gave the mixed dithiolato/dithioato complex Pr4N[Pt{S2C=C[C12H6(t-Bu)(2)-2,7]}{S2CCH[C12H6(t-Bu)(2)-2,7]}] (Pr(4)N8) while the corresponding DMANH+ salt was obtained by treating 7 with 2 equiv of 1,8-bis(dimethylamino)naphthalene (DMAN). The crystal structures of 3b and 5c.CH2Cl2 have been solved by X-ray crystallography. All the platinum complexes are photoluminescent at 77 K in CH2Cl2 or KBr matrix, except for Q(2)6. Compounds 5a-c and Q8 show room-temperature luminescence in fluid solution. The electronic absorption and emission spectra of the dithiolato complexes reveal charge-transfer absorption and emission energies which are significantly lower than those of analogous platinum complexes with previously described 1,1-ethylenedithiolato ligands and in most cases compare well to those of 1,2-dithiolene complexes.     

New physically adsorbed polymer coating for reproducible separations of basic and acidic proteins by capillary electrophoresis

In this work, a new physically adsorbed coating for capillary electrophoresis (CE) is presented. The coating is based on a N,N-dimethylacrylamide-ethylpyrrolidine methacrylate (DMA-EPyM) copolymer synthesized in our laboratory. The capillary coating is simple and easy to obtain as only requires flushing the capillary with a polymer aqueous solution for 2 min. It is shown that by using these coated capillaries the electrostatic adsorption of a group of basic proteins onto the capillary wall is significantly reduced allowing their analysis by CE. Moreover, the DMA-EPyM coating provides reproducible separations of the basic proteins with RSD values for migration times lower than 0.75% for the same day (n = 5) and lower than 3.90% for three different days (n = 15). Interestingly, the electrical charge of the coated capillary wall can be modulated by varying the pH of the running buffer which makes possible the analysis of basic and acidic proteins in the same capillary. The usefulness of this coating is further demonstrated via the reproducible separation of whey (i.e. acidic) proteins from raw milk. The coating protocol should be compatible with both CE in microchips and CE-MS of different types of proteins.     

Molybdenum amido complexes with single Mo-N bonds: synthesis,structure, and reactivity

Reactions of the complex [MoCl(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (1) (phen=1,10-phenanthroline) with potassium arylamides were used to synthesize the amido complexes [Mo(N(R)Ar)(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (R=H, Ar=Ph, 2 a; R=H, Ar=p-tolyl, 2 b; R=Me, Ar=Ph; 2 c). For 2 b the Mo-N(amido) bond length (2.105(4) A) is consistent with it being a single bond, with which the metal attains an 18-electron configuration. The reaction of 2 b with HOTf affords the amino complex [Mo(eta(3)-C(3)H(4)-Me-2)(NH(2)(p-tol))(CO)(2)(phen)]OTf (3-OTf). Treatment of 3-OTf with nBuLi or KN(SiMe(3))(2) regenerates 2 b. The new amido complexes react with CS(2), arylisothiocyanates and maleic anhydride. A single product corresponding to the formal insertion of the electrophile into the Mo-N(amido) bond is obtained in each case. For maleic anhydride, ring opening accompanied the formation of the insertion product. The reaction of 2 b with maleimide affords [Mo(eta(3)-C(3)H(4)-Me-2)[NC(O)CH=CHC(O)](CO)(2)(phen)] (7), which results from simple acid-base metathesis. The reaction of 2 b with (p-tol)NCO affords [[Mo(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)](2)(eta(2)-MoO(4))] (8), which corresponds to oxidation of one third of the metal atoms to Mo(VI). Complex 8 was also obtained in the reactions of 2 b with CO(2) or the lactide 3,6-dimethyl-1,4-dioxane-2,5-dione. The structures of the compounds 2 b, 3-OTf, [Mo(eta(3)-C(3)H(4)-Me-2)[SC(S)(N(H)Ph)](CO)(2)(phen)] (4), [Mo(eta(3)-C(3)H(4)-Me-2)[SC(N(p-tol))(NH(p-tol))](CO)(2)(phen)] (5 a), and [Mo(eta(3)-C(3)H(4)-Me-2)[OC(O)CH=CHC(O)(NH(p-tol))](CO)(2)(phen)] (6), 7, and 8 (both the free complex and its N,N'-di(p-tolyl)urea adduct) were determined by X-ray diffraction.     

Optimized determination of calcium in grape juice,wines, and other alcoholic beverages by atomic absorption spectrometry

This paper describes a study of the different methods of sample preparation for the determination of calcium in grape juice, wines, and other alcoholic beverages by flame atomic absorption spectrometry; results are also reported for the practical application of these methods to the analysis of commercial samples produced in Spain. The methods tested included dealcoholization, dry mineralization, and wet mineralization with heating by using different acids and/or mixtures of acids. The sensitivity, detection limit, accuracy, precision, and selectiviy of each method were established. Such research is necessary because of the better analytical indexes obtained after acid digestion of the sample, as recommended by the European Union, which advocates the direct method. In addition, although high-temperature mineralization with an HNO3-HCIO4 mixture gave the best analytical results, mineralization with nitric acid at 80 degrees C for 15 min gave the most satisfactory results in all cases, including those for wines with high levels of sugar and beverages with high alcoholic content. The results for table wines subjected to the latter treatment had an accuracy of 98.70-99.90%, a relative standard deviation of 2.46%, a detection limit of 19.0 microg/L, and a determination limit of 31.7 microg/L. The method was found to be sufficiently sensitive and selective. It was applied to the determination of Ca in grape juice, different types of wines, and beverages with high alcoholic content, all of which are produced and widely consumed in Spain. The values obtained for Ca were 90.00 +/- 20.40 mg/L in the grape juices, 82.30 +/- 23.80 mg/L in the white wines, 85.00 +/- 30.25 mg/L in the sweet wines, 84.92 +/- 23.11 mg/L in the red wines, 85.75 +/- 27.65 mg/L in the rosé wines, 9.51 +/- 6.65 mg/L in the brandies, 11.53 +/- 6.55 mg/L in the gin, 7.3 +/- 6.32 mg/L in the pacharán, and 8.41 +/- 4.85 mg/L in the anisettes. The method is therefore useful for routine analysis in the quality control of these beverages.     

Role of anions on the crystal structures of copper(II) and zinc(II) complexes of a tunable butterfly cyclophane macrocycle

Three crystal structures of a ditopic cyclophane ligand (L) in which two 1,5,8,12-tetraamine molecules have been attached through methylene spacers to the ortho positions of a benzene ring are reported. The first one (1) corresponds to the tetraprotonated free macrocycle (H4L4+) having two tetrachlorozincate(II) counteranions (C24H54O2N8Cl8Zn2, a = 9.1890(2) A, b = 14.0120(3) A, c = 15.3180(3) A, alpha = 89.2320(7) degrees , beta = 82.0740(6) degrees , gamma = 83.017(1) degrees , Z = 2.00, triclinic, P); the second one (2) is of a binuclear Cu2+ complex having coordinated chloride anions and perchlorate counteranions (C24H58O14N8Cl4Cu2 a = 9.9380(2) A, b = 30.2470(6) A, c = 53.143(1) A, orthorhombic, F2dd, Z = 18), and the third one (3) corresponds to an analogous Zn2+ complex that has been crystallized using triflate as counteranion (C26H(51.2)O(6.6)N8Cl2F6S2Zn2 a = 8.472(5) A, b = 9.310(5), c = 13.745(5) A, alpha = 84.262(5) degrees , beta = 77.490(5) degrees , gamma = 73.557(5) degrees , triclinic, P, Z = 2). The analysis of the crystallographic data clearly shows that the conformation of the macrocycle and, in consequence, the overall architecture of the crystals are controlled by the anions present in the moiety, pi-pi-stacking associations, and hydrogen bonding interactions. The protonation and stability constants for the formation of the Cu2+ and Zn2+ complexes in aqueous solution have been determined potentiometrically in 0.15 mol dm(-3) NaClO4 at 298.1 K. Intramolecular hydrogen bonding defines the protonation behavior of the compound. Positive cooperativity is observed in the formation of the Cu2+ complexes.