Preparation and Characterization of Compositions Based on PbO-MgO-Nb2O5 Using the Sol-Gel Method

Lead Magnesium Niobate, Pb(Mg_1/3Nb_2/3)O₃ (PMN), is an important relaxor ferroelectric material. A significant problem exists, however, in the preparation of this material: it is very difficult to prepare pure phase, without the presence of a pyrochlore impurity phase which degrades the dielectric properties. Depending on the processing conditions, the amount of pyrochlore phase varies.Considering the ternary diagram PbO-MgO-Nb₂O₅, different compositions have been prepared by a simple sol-gel method at room temperature using Pb(CH₃COO)₂, Mg(CH₃COO)₂, Nb(OC₂H₅)₅ as precursors. After the heat treatment, the samples obtained were analyzed by XRD and EPMA with the purpose of studying the compositions formed.From the analysis of these results, it seems to be that the appearance of pyrochlore can be related to the reactivity of the MgO and/or the presence of other phases of the binary system PbO-Nb₂O₅. An excess of Pb and Mg is necessary for compositions to be formed near the PMN. The control of the amount of these two elements is very important because an excess of MgO would lead to rich compositions in Mg as a secondary phase.     

Supramolecular helical mesomorphic polymers. Chiral induction through H-bonding

The work described here concerns a challenge of general interest in supramolecular chemistry: the achievement of chiral helical organizations with controlled structures. This work provides a strategy to obtain supramolecular polymers in which a chiral helical conformation has been induced by a noncovalent association, that is, through hydrogen bonding. Polycatenar 2,4,6-triarylamino-1,3,5-triazines, which organize into columnar mesophases and are susceptible to H-bonding interactions, were chosen as a starting point to build up the chiral supramolecular structure. The stacking of these mesogens has been forced to wind in a helical way by means of H-bond association with (R)-3-methyladipic acid, within the mesophase. The optically active columnar organization has been studied in depth by optical microscopy, differential scanning calorimetry (DSC), X-ray diffraction, and circular dichroism. Formation of stable complexes between the triazine units and (R)-3-methyladipic acid has also been investigated by means of NMR diffusion-ordered spectroscopy (DOSY) experiments in chloroform.     

Interaction of 2-hydroxy-substituted Nile red fluorescent probe with organic nitrogen compounds

The fluorescent properties of 2-hydroxy Nile red dye (HONR) proved to be highly sensitive to the basicity of hydrogen bond acceptors. Fluorescence quantum yields and fluorescence decay profiles were measured as the function of the concentration of organic nitrogen compounds in solvents of various polarities. The detailed mechanism and the kinetics of the fluorescence quenching were revealed with the combined analysis of the steady-state and time-resolved spectroscopic data. The relative contribution of the competing reaction steps was found to be very sensitive to the basicity of the additive and to solvent polarity. The most profound change appeared in the unimolecular deactivation pathways of the excited hydrogen-bonded HONR, whereas the formation rate of this species varied to a lesser extent. The dissociation into excited HONR and ground-state base was able to compete with the energy dissipation only when 2,4,6-trimethylpyridine was used as hydrogen bond acceptor in toluene. The bimolecular quenching of the excited hydrogen-bonded complex played significant role in apolar solvents. Proton displacement along the hydrogen bond in the excited complex led to excited ion pairs in polar media.     

Proton to carbon-13 INEPT in solid-state NMR spectroscopy

A refocused INEPT through-bond coherence transfer technique is demonstrated for NMR of rigid organic solids and is shown to provide a valuable building block for the development of NMR correlation experiments in biological solids. The use of efficient proton homonuclear dipolar decoupling in combination with a direct spectral optimization procedure provides minimization of the transverse dephasing of coherences and leads to very efficient through-bond (1)H-(13)C INEPT transfer for crystalline organic compounds. Application of this technique to 2D heteronuclear correlation spectroscopy leads to up to a factor of 3 increase in sensitivity for a carbon-13 enriched sample in comparison to standard through-bond experiments and provides excellent selectivity for one-bond transfer. The method is demonstrated on a microcrystalline sample of the protein Crh (2 x 10.4 kDa).     

Density functional study of the conformational space of 4C1 D-glucuronic acid

The conformational space of (4)C(1) alpha- and beta-d-glucuronic acid was scanned by HF/3-21G(p) calculations followed by optimization of the 15 most stable structures for each, using the B3LYP density functional theory method in conjunction with a diffuse polarized valence triple-zeta basis set. We found a general preference of the alpha anomers in the isolated molecules in agreement with the large endo-anomeric hyperconjugation effects in these structures. From the other intramolecular interactions (exo-anomeric hyperconjugation, hydrogen-bonding, dipole-dipole, and steric interactions), the effect of the hydrogen bonding is the most pronounced and plays a major role in determining the stability order within the alpha and beta series. The most stable conformer of both alpha and beta (4)C(1) d-glucuronic acid is the structure with the maximum number (5) of intramolecular hydrogen bonds. Introduction of solvent (water) effects by the SCI-PCM model resulted in two characteristic changes of the energetic properties: the gas-phase stability order changed considerably, and the energy range of the 15 most stable conformers decreased from 30 to 15 kJ/mol. The geometrical parameters reflect well the superimposed effects of hyperconjugation and hydrogen-bonding interactions. Most characteristics are the variations of the C-O bond distances (within a range of 0.04 A) upon the combined intramolecular effects.     

Topological properties of the peptide bond in glycyl-L-threonine dihydrate based on a fast synchrotron/CCD-diffraction experiment at 100 K

The charge density of glycyl-L-threonine dihydrate is extracted from a synchrotron data set of 98405 reflections collected at 100 K with a Bruker CCD area detector up to a resolution of d=0.38 A (sintheta/lambda = 1.32 A 1). The data are interpreted in terms of the "rigid pseudoatom" model. The topology of the experimental density is analyzed and compared with the topology obtained experimentally for the constituting amino acids and to that derived from Hartree-Fock calculations for the isolated molecule. All critical points of the electron density at the covalent and hydrogen bonds, as well as those of the Laplacian, were located, thereby deriving quantitative topological data for the peptide and side chain bonds. Bond topological indices in the dipeptide compare well with those of the corresponding bonds in the building amino acids, thus suggesting transferability of electronic properties of atoms and functional groups when these are derived by Bader's partitioning. Discrepancies between theoretical and experimental results could be attributed to crystal field effects.     

A computational model of the nicotinic acetylcholine binding site

We have derived a model of the nicotinic acetylcholine binding site. This was accomplished by using three known agonists (acetylcholine, nicotine and epibatidine) as templates around which polypeptide side chains, found to be part of the receptor cavity from published molecular biology studies, are allowed to flow freely in molecular dynamics simulations and mold themselves around these templates. The resulting supramolecular complex should thus be a complement, both in terms of steric effects as well as electronic effects, to the agonists and it should be a good estimation of the true receptor cavity structure. The shapes of those minireceptor cavities equilibrated rapidly on the simulation time scale and their structural congruence is very high, implying that a satisfactory model of the nicotinic acetylcholine binding site has been achieved. The computational methodology was internally tested against two rigid and specific antagonists (dihydro--erytroidine and erysoidine), that are expected to give rise to a somewhat differently shaped binding site compared to that derived from the agonists. Using these antagonists as templates there were structural reorganizations of the initial receptor cavities leading to distinctly different cavities compared to agonists. This indicates that adequate times and temperatures were used in our computational protocols to achieve equilibrium structures for the agonists. Overall, both minireceptor geometries for agonists and antagonists are similar with the exception of one amino acid (ARG209).     

Studies on the Distribution of Phenoxyacetic Acid in Two-Phase Systems: <Emphasis Type="Italic">n</Emphasis>-Aliphatic Hydrocarbon – Water

Summary. Phenoxyacetic acid distribution in two-phase systems n-aliphatic hydrocarbon (C₅–C₈) – water and its dimerization in organic phase were investigated. The values of distribution coefficient (D _HR), distribution constant (K _D), and dimerization constant (K _dim) of acid were obtained. The empirical correlations of these quantities with Hildebrand solubility parameter of organic solvents were established. The influence of pH of the aqueous phase as well as the polarity of the applied organic solvents on phenoxyacetic acid physical chemistry in the two-phase systems was described.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Synthesis and characterization of hybrid borosiloxane gels as precursors for Si–B–O–C fibers

The sol–gel method has been used for the synthesis of borosilicate gels from mixtures of methyltriethoxysilane (MTES) and dimethyldiethoxysilane (DMDES) and boric acid. The use of boric acid, B(OH)₃ allows the hydrolysis and condensation of hybrid silicon alkoxides without further addition of water or catalyst. The use of difunctional silicon units, –(CH₃)₂SiO– promote the formation, during the sol–gel process, of linear oligomers which facilitate fiber drawing before gelation. Gel characterization performed by FT-IR, XRD, TG-DTA and DCS analysis indicates the formation of a mixed network with incorporation of the boron units via =B-O-Si≡ bridges. The formation of borosiloxane bonds seems favored by the presence of DMDES. SiBOC glasses were obtained after pyrolysis of the borosilicate gels in argon atmosphere at 1000 °C. TG-DTA study indicates that the ceramic yield decreases by increasing the amount of DMDES. Gel fibers were successfully prepared from convenient partially-aged solutions by hand drawing. Pyrolysis of the obtained gel fibers under argon atmosphere at 1000 °C open the possibility to produce SiBOC homogeneous glass fibers with diameter as low as 10 μm.