Synthesis of a benzoxazine with precisely two phenolic OH linkages and the properties of its high‐performance copolymers

A phenolic OH‐containing benzoxazine ( F‐ap ), which cannot be directly synthesized from the condensation of bisphenol F, aminophenol, and formaldehyde by traditional procedures, has been successfully prepared in our alternative synthetic approach. F‐ap was prepared by three steps including (a) condensation of 4‐aminophenol and 5,5'‐methylenebis(2‐hydroxybenzaldehyde) (1) , (b) reduction of the resulting imine linkage by sodium borohydride, and (c) ring closure condensation by formaldehyde. The key starting material, (1) , was prepared from 2‐hydroxybenzaldehyde and s‐trioxane in the presence of sulfuric acid. F‐ap is structurally similar to bis(3,4‐dihydro‐2H‐3‐phenyl‐1,3‐benzoxazinyl)methane ( F‐a, a commercial benzoxazine based on bisphenol F/aniline/formaldehyde) except for two phenolic OHs. The phenolic OHs can provide reaction sites with epoxy and 1,1'‐(methylenedi‐p‐phenylene)bismaleimide (BMI). The structure–property relationships between the thermosets of F‐ap /epoxy, F‐a /epoxy, F‐ap /BMI, and F‐a /BMI were discussed. Experimental data showed that thermosets based on F‐ap /epoxy and F‐ap /BMI provided much better thermal properties than those based on F‐a /epoxy and F‐a /BMI. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2686–2694     

Single-layered graphene oxide nanosheet/polyaniline hybrids fabricated through direct molecular exfoliation

In this study, we used direct molecular exfoliation for the rapid, facile, large-scale fabrication of single-layered graphene oxide nanosheets (GOSs). Using macromolecular polyaniline (PANI) as a layered space enlarger, we readily and rapidly synthesized individual GOSs at room temperature through the in situ polymerization of aniline on the 2D GOS platform. The chemically modified GOS platelets formed unique 2D-layered GOS/PANI hybrids, with the PANI nanorods embedded between the GO interlayers and extended over the GO surface. X-ray diffraction revealed that intergallery expansion occurred in the GO basal spacing after the PANI nanorods had anchored and grown onto the surface of the GO layer. Transparent folding GOSs were, therefore, observed in transmission electron microscopy images. GOS/PANI nanohybrids possessing high conductivities and large work functions have the potential for application as electrode materials in optoelectronic devices. Our dispersion/exfoliation methodology is a facile means of preparing individual GOS platelets with high throughput, potentially expanding the applicability of nanographene oxide materials.     

Quantum-inspired space search algorithm (QSSA) for global numerical optimization

This work presents the evolutionary quantum-inspired space search algorithm (QSSA) for solving numerical optimization problems. In the proposed algorithm, the feasible solution space is decomposed into regions in terms of quantum representation. As the search progresses from one generation to the next, the quantum bits evolve gradually to increase the probability of selecting the regions that render good fitness values. Through the inherent probabilistic mechanism, the QSSA initially behaves as a global search algorithm and gradually evolves into a local search algorithm, yielding a good balance between exploration and exploitation. To prevent a premature convergence and to speed up the overall search speed, an overlapping strategy is also proposed. The QSSA is applied to a series of numerical optimization problems. The experiments show that the results obtained by the QSSA are quite competitive compared to those obtained using state-of-the-art IPOP-CMA-ES and QEA.     

Temperature dependence of excitonic emission in cubic CdSe thin film

A detailed photoluminescence investigation of the thermal redshift and broadening of the excitonic line of cubic CdSe film grown by molecular beam epitaxy is presented. Free excitonic emission from the cubic CdSe film was observed at low temperature. Temperature-dependent measurement was performed to obtain material parameters related to exciton-phonon interaction by fitting the experimental data to the phenomenological model. The relative contribution of both acoustic and optical phonon to the band gap shrinkage and exciton linewidth broadening are discussed. Exciton binding energy of 16±1.5 meV was determined from the Arrhenius analysis.     

Resistance-in-series analysis in cross-flow ultrafiltration of fermentation broths of Bacillus subtilis culture

Quantitative analysis of various resistances that lead to flux decline during cross-flow ultrafiltration (UF) of the fermentation broth of Bacillus subtilis ATCC (American Type Culture Collection) 21332 culture was studied. Polyethersulfone membrane with a molecular weight cut-off (MWCO) of 100 kDa was used. Prior to cross-flow UF, the broth was treated by acid precipitation (pH 4.0) and centrifugation, and the precipitate was re-dissolved in NaOH solution. Experiments were performed at a feed pH of 7.0, a feed surfactin concentration of 1.48 g L⁻¹, and a cross-flow velocity of 0.32 m s⁻¹ but at different transmembrane pressures (ΔP, 20–100 kPa). The resistance-in-series model was used to analyze the flux behavior, which involves the resistances of membrane itself and cake as well as those due to adsorption and solute concentration polarization. It was shown that the resistance due to solute concentration polarization and of membrane dominated under the conditions examined. The resistances due to cake formation and solute adsorption were comparable, and their sum contributed below 20% of the overall resistance.     

Nonspherical LED packaging lens for uniformity improvement

Light emitting diode (LED) has more advantages compared with a traditional incandescent light bulb and a fluorescent lamp, such as small size, low quantity of heat, long life, low power consumption, fast response, plain packaging and ease of develop ment of a frivolous short product. A methodology is proposed to improve the uniformity of the LED illumination system. As a light source in a backlight unit (BLU), the requirement for optical characteristics of a LED is different from highly directional conventional ones. New diffused-type LEDs need to be developed to fulfill the requirement of the BLU industry. A non-spherical lens is designed to optimize uniformity, and a great improvement in uniformity from 28.4 to 64% is demonstrated. In the future, it may used in an LED display to improve the unevenness of illumination.     

Surface modification for enhancing antibody binding on polymer-based microfluidic device for enzyme-linked immunosorbent assay

A novel surface treatment method using poly(ethyleneimine) (PEI), an amine-bearing polymer, was developed to enhance antibody binding on the poly(methyl methacrylate) (PMMA) microfluidic immunoassay device. By treating the PMMA surface of the microchannel on the microfluidic device with PEI, 10 times more active antibodies can be bound to the microchannel surface as compared to those without treatment or treated with the small amine-bearing molecule, hexamethylenediamine (HMD). Consequently, PEI surface modification greatly improved the immunoassay performance of the microfluidic device, making it more sensitive and reliable in the detection of IgG. The improvement can be attributed to the spacer effect as well as the functional amine groups provided by the polymeric PEI molecules. Due to the smaller dimensions (140x125 microm) of the microchannel, the time required for antibody diffusion and adsorption onto the microchannel surface was reduced to only several minutes, which was 10 times faster than the similar process carried out in 96-well plates. The microchip also had a wider detection dynamic range, from 5 to 1000 ng/mL, as compared to that of the microtiter plate (from 2 to 100 ng/mL). With the PEI surface modification, PMMA-based microchips can be effectively used for enzyme linked immunosorbent assays (ELISA) with a similar detection limit, but much less reagent consumption and shorter assay time as compared to the conventional 96-well plate.