Eigenspace-based source number estimation for direction-of-arrival estimation

A eigenspace-based source number estimation was presented.It projects the estimated covariance matrix of array signal into signal eigen-subspace and noise eigen-subspace, respectively.Using the orthogonality between signal eigen-subspace and noise eigen-subspace, it is easy to differentiate the contribution of signal and noise by using the criterion value,or the magnitude of projection.Like the Direction-of-Arrival(DOA) estimation algorithm,the estimator uses the eigenvalue decomposition of covariance matrix with order M×M,where M is the number of elements,and hence can save much computational burden.To reduce more computational burden,the estimation can be implemented by the decomposition in the real-value space.Computer simulation demonstrates the distribution of criterion value and the performance of the estimation method.The estimation method was also tested with the sonar data,which shows good performances.     

Surface-field-induced effects on morphologies of lamella-forming diblock copolymers in nanorod arrays

The surface-induced effect on the morphologies of lamella-forming diblock copolymers in nanorod arrays is studied by using the self-consistent field theory.In the simulation study,a rich variety of novel morphologies are observed by variations in the strength of the surface field for the diblock copolymers.Different surface-field-induced effects are examined for the diblock copolymers in the arrays with distinct preferential surfaces.It is observed that the majority-block preferential surfaces have more obvious induced effects than those of minority-block preferential surfaces.The strong surface fields exhibit different behaviours from those observed in the weak surface fields,by which the morphologies possess cylindrical symmetries.Results from this research deepen the knowledge of surface-induced effects in a confinement system,which may aid the fabrication of polymer-based nanomaterials.     

基于桥域理论的Cu单晶纳米切削跨尺度仿真研究

桥域方法是一种典型的跨尺度仿真研究方法.基于桥域理论,本文分析了原子和连续介质耦合区域的处理问题,即在耦合区采用不同的权重计算系统的能量,通过Lagrange乘子法对原子和连续介质位移进行约束.采用桥域方法,建立了单晶Cu米纳切削的跨尺度仿真模型,获得了单晶Cu纳米切削的材料变形机理.同时,研究了不同切削速度对纳米切削过程和原子受力分布的影响,仿真结果表明:随着切削速度的提高,切削区原子所受的力值增大,切屑变形系数减小,已加工表面变质层厚度增加.本文基于桥域理论,实现了Cu单晶纳米切削跨尺度的建模和仿真, 关键词： 桥域法 纳米切削 单晶Cu 切削速度     

微纳尺度光纤布拉格光栅折射率传感的理论研究

亚波长直径微纳光纤强倏逝场传输的光学特性,使其对周围介质折射率的变化具有极高的灵敏度.本文提出一种基于微纳尺度光纤布拉格光栅(MNFBG)的折射率传感器,结合微纳光纤倏逝场传输和光纤布拉格光栅(FBG)强波长选择的特性来实现高精度折射率传感,对其制备可行性进行了讨论.论文中对MNFBG折射率传感机理进行了深入的理论分析,并使用OptiGrating软件进行了数值模拟,模拟数据显示MNFBG折射率测量的灵敏度随着光纤半径的减小而增加,其中光纤半径为400 nm的MNFBG灵敏度可达到993 nm/RIU,相比于包层蚀刻的FBG灵敏度增加了170倍,说明MNFBG对发展微型化、高灵敏度折射率传感器具有良好的应用前景. 关键词： 微纳光纤 光纤布拉格光栅 折射率传感     

The modulation effect of substrate doping on multi-node charge collection and single-event transient propagation in 90-nm bulk complementary metal-oxide semiconductor technology

Variation of substrate background doping will affect the charge collection of active and passive MOSFETs in complementary metal-oxide semiconductor (CMOS) technologies, which are significant for charge sharing, thus affecting the propagated single event transient pulsewidths in circuits. The trends of charge collected by the drain of a positive channel metal-oxide semiconductor (PMOS) and an N metal-oxide semiconductor (NMOS) are opposite as the substrate doping increases. The PMOS source will inject carriers after strike and the amount of charge injected will increase as the substrate doping increases, whereas the source of the NMOS will mainly collect carriers and the source of the NMOS can also inject electrons when the substrate doping is light enough. Additionally, it indicates that substrate doping mainly affects the bipolar amplification component of a single-event transient current, and has little effect on the drift and diffusion. The change in substrate doping has a much greater effect on PMOS than on NMOS.     

Modelling of multi-bodies in close proximity under water waves——Fluid resonance in narrow gaps

Viscous fluid model and potential flow model with and without artificial damping force(f=-μV,μ the damping coefficient and V the local averaging flow velocity) are employed in this work to investigate the phenomenon of fluid resonance in narrow gaps between multi-bodies in close proximity under water waves.The numerical results are compared with experimental data available in the literature.The comparison demonstrates that both the viscous fluid model and the potential flow model are able to predict the res...     

Nanostructured substrate with nanoparticles fabricated by femtosecond laser for surface-enhanced Raman scattering

A simple and fast method to fabricate nanostructured substrates with silver nanoparticles over a large area for surface-enhanced Raman scattering (SERS) is reported. The method involves two steps: (1) dip the substrate into a silver nitrate solution for a few minutes, remove the substrate from the solution, and then air dry and (2) process the silver nitrate coated substrate by femtosecond (fs) laser pulses in air. The second step can create silver nanoparticles distributed on the nanostructured surface of the substrate by the photoreduction of fs multiphoton effects. This study demonstrates that an enhancement factor (EF) greater than 5×10⁵, measured by 10⁻⁶ M Rhodamine 6G solution, can be achieved. The proposed technique can be used to integrate the SERS capability into a microchip for biomedical and chemical analysis.     

Surfactant-free hydrothermal synthesis of?submicron?BiFeO3?powders

Submicron BiFeO₃ powders were successfully synthesized via a simple hydrothermal process with the assistance of mineralizer (NaOH) at 150–190°C, using FeCl₃ and Bi(NO₃)₃⋅5H₂O as reactants. The effects of mineralizer concentration, reaction temperature and time on the phase evolution and crystal morphology of the resulting samples were investigated. X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetry and differential scanning calorimetry (TG-DSC), and vibrating sample magnetometry (VSM) were used to characterize the as-synthesized samples. The experimental results revealed that a pure BiFeO₃ phase could be formed at a temperature ranging from 170 to 190°C for 4–20 h in the presence of 0.03–0.12 M NaOH. It was found that the mineralizer concentration, reaction temperature and time played a key role in controlling the growing speed of nuclei and formation of BiFeO₃ crystallites. The possible formation mechanisms of submicron BiFeO₃ powders with different morphologies were presented. The magnetization of BiFeO₃ powders showed a weak ferromagnetic behavior at room temperature.     

铒离子注入碳化硅的射程和退火行为研究

用300—500 keV能量的铒(Er)离子注入碳化硅(6H-SiC)晶体中,利用卢瑟福背散射技术研究了剂量为5×10¹⁵ cm^-2 的Er离子注入6H-SiC晶体的平均投影射程R_p和射程离散ΔR_p,将测出的实验值和TRIM软件得到的理论模拟值进行了比较,发现R_p的实验值与理论值符合较好,ΔR_p的实验值和理论值差别大一些 关键词： 离子注入 投影射程和射程离散 退火行为 卢瑟福背散射技术