Ln2Sn2O7：Er3+纳米晶的制备及发光性能研究

采用溶胶-凝胶法合成Ln₂Sn₂O₇:Er³⁺(Ln=La,Gd,Y)纳米晶。通过X射线衍射和场发射扫描电子显微镜测试了样品的晶体结构和形貌,同时对样品的上转换发光性能进行了测试。结果表明:在980 nm连续激发光的激发下,样品主要表现为绿光发射。发射中心在528,549 nm的绿光和672 nm处的红光发射分别对应Er³⁺离子的⁴S_3/2→⁴I_15/2、²H_11/2→⁴I_15/2和 ⁴F_9/2→⁴I_15/2跃迁。以La₂Sn₂O₇:Er³⁺纳米晶为例,Er³⁺离子的摩尔分数为7%、退火温度为1 150℃是其制备的最佳条件,此时其各个发射峰的强度最高。对La₂Sn₂O₇:Er³⁺的发光强度与激发功率关系的研究表明,其绿光和红光发射均为双光子过程。激发光吸收和能量转移是La₂Sn₂O₇:Er³⁺纳米晶上转换发光的主要机制。     

All-optical broadcast and multicast technologies based on PPLN waveguide

All-optical 1 ×4 broadcast and 1 ×3 multicast experiments of a 40-Gb/s return-to-zero on-off keying （RZ- OOK） signal based on a periodically poled lithium niobate （PPLN） waveguide are demonstrated in this letter. Clear opened eye diagrams and error-free performance are achieved for the broadcast signals at 1541.3, 1543.7, 1548.5, and 1550.9 nm. Multicast technology uses cascaded second-harmonic generation and difference-frequency generation in a Ti：PPLN waveguide. An error-free operation with a negligible power penalty is achieved for the three wavelength-division multiplexing multicast signals at 1533, 1537, and 1541 nm.     

带孔硅纳米薄膜热整流及声子散射特性研究

本文基于非平衡的分子动力学模拟方法计算了带有三角形孔的硅纳米薄膜的界面热阻特性,结果表明300-1100 K范围内随着热流方向的改变,在含有三角形孔的硅纳米薄膜中存在热整流效应,热整流系数达28％.同时借助于声子波包动力学模拟方法,获得了不同频率下的纵波声子在三角形孔处的散射特性,结果表明纵波声子在散射过程中产生了横波声子,并且从三角形底部向顶部入射的声子能量透射系数比反向时平均低22％.不对称结构引起的声子透射率的差异是引起热整流效应的主要因素.     

Resonantly pumped Q-switched Er:GdVO4 laser

We describe a Q-switched Er:GdVO₄ laser resonantly pumped by a MgO-doped periodically poled LiNbO₃ optical parametric oscillator （MgO: PPLN OPO） at 1536 nm. In continuous-wave lasing, the maximum output power is 1.14 W with an incident pump power of 4.7 W and a slope efficiency of 27%. In Q-switched operation, 1.1 mJ of output pulse energy is achieved at 200 Hz. The upper-state lifetime at different pulse repetition frequencies is also calculated.     

1645 nm Q-Switched resonantly pumped Er:YAG laser

A resonantly pumped Q-switched Er:YAG laser at 1645 nm was reported. 1 mJ of output pulse energy was achieved for Q-switched operation at 100 Hz repetition rate under total incident pump power of 4 W. An output peak power of 14 kW and pulse width of 60.6 ns were obtained.     

Effect of strain and nonparabolicity on interband transition energies of InAs/GaAs coupled double quantum dots

Strained potential profiles and electronic subband energies of InAs/GaAs coupled double quantum dots (DQDs) were calculated by using a three-dimensional finite-difference method (FDM) taking into account shape-based strain and nonparabolic effects. The interband transition energies from the ground electronic subband to the ground heavy-hole band (E₁-HH₁) in the InAs/GaAs DQDs, as determined from the FDM calculations taking into account strain and nonparabolic effects, were in reasonable agreement with the experimental peaks corresponding to the (E₁-HH₁) interband transition energies at several temperatures, as determined from the temperature-dependent photoluminescence spectra.     

Pigment identification and decoration analysis of a 5th century Chinese lacquer painting screen: a micro‐Raman and FTIR study

To investigate the pigments and decoration applied to a wood‐based lacquer painting screen from the tomb of Si‐ma Jin‐long, Shanxi Province, central China, made by Chinese craftsmen in the 5th century, a combination of micro‐Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), wavelength dispersive X‐ray fluorescence (WDXRF), and microscopic examination was used. The obtained results are as follows: (1) the black, yellow, and red colors are identified as carbon black, orpiment and realgar, and cinnabar, respectively, by using micro‐Raman spectroscopy. The FTIR result shows that the white pigment filled in the leaves is not lead white, as assumed in the literature, but gypsum. Whether lead white was used at other locations remains unanswered and requires more samples for further work; (2) the thickness of each discernable pigment layer, as observed under the microscope, is approximately equal and the differences among them are small, suggesting a superfine painting skill; besides, a noticeable smooth interface between wood and the red grounding substance indicates that a polishing process might have been applied before the painting; (3) the red background was proved to contain cinnabar, but further FTIR analyses found no evidence for the presence of Chinese wood oil; and (4) the most interesting finding, rarely reported before, is that white grains of different sizes are found in both pigment layers and the grounding substance, which are perhaps an intentional addition. Further, in situ XRF and Raman analyses indicate that they are sourced from hydroxyapatite, coming probably from the intentional addition of animal bone ash to the lacquer. But how such a process could be finished and what purpose it served have not yet been answered. Copyright © 2009 John Wiley & Sons, Ltd.     

Mott-Insulator-Superfluid Phase Transition with Coupled-Cavity Frequency Conversion System

An array of coupled cavities, each of which contains a triangle-down-level atom, is investigated. An effective Hamiltonian can be achieved under the strong classical driving. We can control the transition between Mott-insulator and superfluid states by the classical driving. The frequency conversion in one site has the same effects of nonlinear in BH hamiltonian which can induce insulator-superfluid states.     

铁电存储器中高能质子引发的单粒子功能中断效应实验研究

利用中国原子能科学研究院的中高能质子实验平台,针对两款商用铁电存储器开展了中高能质子单粒子效应实验研究,发现其中一款器件在质子辐照下发生了单粒子翻转和单粒子功能中断.本文主要针对单粒子功能中断效应展开了后续实验研究.首先通过改变质子能量对器件进行辐照,发现单粒子功能中断截面随质子能量的提高而增加.为进一步研究器件发生单粒子功能中断的机理,利用激光微束平台开展了辅助实验,对铁电存储器的单粒子功能中断效应的敏感区域进行了定位,最后发现铁电存储器单粒子功能中断是由器件外围电路发生的微锁定导致的.     

A high power CW Ho,Tm:GdVO<Subscript>4</Subscript> laser

In this paper, we report a 22.7 W continuous wave (CW) diode-pumped cryogenic Ho( at %), Tm(3 at %):GdVO₄ laser. The pumping sources of Ho,Tm:GdVO₄ laser are two fiber-coupled laser diodes with fiber core diameter of 0.4 mm, both of them can supply 42 W power laser operating near 802 nm. For input pump power of 64.7 W at 802.5 nm, the output power of 22.7 W in CW operation, optical-to-optical conversion efficiency of 35.1% at 2.05 μm has been attained. The M ² factor was found to be 2.0 under an output power of 16.5 W.