Non-isothermal thermogravimetric pyrolysis kinetics of waste petroleum refinery sludge by isoconversional approach

Pyrolysis of petroleum refinery sludge has received global acclamation as a clean conversion technique for providing solution of sludge disposal as well as efficient resource utilization. This communication reports the kinetics study of pyrolysis of petroleum refinery sludge. Experiments were carried out by means of thermogravimetric analysis at different heating rates of 5, 10 and 20°C min⁻¹. The pyrolytic reaction is significant in the temperature range of 200–350°C and analysis and evaluation of kinetic parameters is done in the 100–500°C region of non-isothermal TG curves obtained in nitrogen atmosphere. The activation energy is calculated by iso-conversional method, then other kinetic parameters are determined by considering single reaction and two reaction global kinetic model. Two-reaction model is found to fit satisfactorily the experimental results.     

Polyelectrolyte behavior and macromolecular properties of sodium amylopectin xanthate in dilute solution

Sodium amylopectin xanthate was prepared by xanthation of potato amylopectin in alkaline medium. The pure product was characterized by I₂ solution and ultraviolet spectra of the xanthate groups. The polyelectrolyte behavior of Na amylopectin xanthate in aqueous and salt solutions was investigated by viscometry and light scattering. Its polyelectrolyte behavior in aqueous solution as studied viscometrically was completely different from that of Na amylose xanthate, which is characteristic of linear polyelectrolyte molecules. This difference in behavior could be partly due to the branched structure of amylopectin molecule. A dissymmetry study of Na amylopectin xanthate in aqueous and salt solutions, however, showed that Na amylopectin xanthate molecule underwent expansion in water by about 1.3 times its linear dimension in 0.5M NaCl (unperturbed value). Light-scattering measurements confirmed that the Na amylopectin xanthate molecule had a polydisperse random-coil chain configuration in 0.25M NaCl. Its molecular weight, end-to-end length, and other parameters in salt and alkali solutions were also determined, and the data were then compared with those of Na amylose xanthate in the same media. The solution behavior of Na amylopectin xanthate in 1M NaOH was further investigated and linear expansion factor α, excluded volume factor A₂M _W/[η], and Flory's hydrodynamic constant φ were evaluated.     

Determination of ammonia, ethanol and acetic acid in solution using membrane introduction mass spectrometry

Methods have been developed to allow applications of membrane introduction mass spectrometry (MIMS) to monitor solution phase components of fermentation broths using electron ionization. The solutions are transported by flow injection analysis (FIA) through a direct insertion membrane probe, fitted with a silicone membrane in the sheet configuration. Analytes of interest pass through the membrane and are ionized by electron implant ionization. The compounds monitored are ammonia, acetic acid, and ethanol, with ammonia being detected as the monochloramine derivative which is generated at pH 10 upon addition of hypochlorite. Quantitation is achieved using external standard solutions. The dynamic range for the quantification of ammonia is 2-8000 ppm, and for ethanol and acetic acid 10-1000 ppm. This method provides rapid detection of analytes of interest, on-line monitoring capabilities, and the advantage of electron ionization. The introduction of samples into the mass spectrometer is achieved readily and automatically, the response time is a few seconds, and there are no memory effects.     

Physicochemical and macromolecular properties of sodium amylose xanthate in dilute solution

Sodium amylose xanthate has been studied in dilute solution. Potato starch was fractionated for this purpose into amylose and amylopectin fractions. Amylose was xanthated in solution under alkaline conditions and the Na amylose xanthate was then characterized by reaction with I₂ solution and ultraviolet spectra of the xanthate groups determined. Stability of the xanthate in alkaline condition under both oxygen and nitrogen atmospheres was also investigated. From light scattering measurements of dilute salt solutions of Na amylose xanthate, the weight-average molecular weight M _w as well as the molecular dimensions were determined. In 0.11M NaCl, which conforms to the θ solvent, Na amylose xanthate molecules appear to have a random-coil configuration. Two other configurational parameters, such as the effective bond length b, and the steric factor σ, i.e., (R₀²)^1/2/(R_f² )^1/2, where (R₀²)^1/2 is the Root-mean-square end-to-end distance in the unperturbed state and (R_f² )^1/2 is the unperturbed value calculated on the assumption of free rotation about each intermonomer C? O bond of the amylose chain were also calculated and found to be 6.24 and 1.020, respectively. It is thus concluded that the amylose chain in Na amylose xanthate behaves as a typical flexible coil in dilute salt solution.     

NS and NSO-Donor ligands and their metal complexes. Synthesis and characterisation of a new low-spin iron(III) complex with 1,2-di(o-aminophenylthio)ethane and iron(III), cobalt(III) and manganese(III) complexes of 1,2-di(o-salicylaldiminophenylthio)ethane

Summary Iron(III) complexes of a quadridentate N₂S₂ donor ligand, 1,2-di(o-aminophenylthio)ethane (DAPTE) and its Schiff Base with salicylaldehyde, a hexadentate N₂S₂O₂ donor ligand,viz. 1,2-di(o-salicylaldiminophenylthio)ethane (H₂DSALPTE) have been synthesised and characterised.The Schiff base ligand (1 mol) gave a dark green tri-iron(III) [Fe₃(DSALPTE)(HDSALPTE)Cl₃]Cl₂ complex when reacted with anhydrous iron(III) chloride (1 mol). The Mössbauer data of this complex suggest the presence of three iron sites, one of which is octahedral and the other two tetrahedral. On the other hand, Fe(ClO₄)₃ reacted smoothly with H₂DSALPTE in ethanol to give a mononuclear pseudo-octahedral complex in which the ligand functions in a dibasic hexadentate fashion. Mössbauer data suggest the presence of a low-spin-high-spin equilibrium in the solid state. The manganese(III) and cobalt(III) complexes of the Schiff base, H₂DSALPTE, are also studied for the sake of comparison with the corresponding iron(III) complex. The N₂S₂ ligand, however, formed a low-spin pseudo-octahedral iron(III) complex. The complexes have been characterised by elemental analysis, molar conductance values, cryomagnetic data and i.r., electronic and Mössbauer spectral data.     

Preparation and reactions of mono-reissert compounds and analogs at the 3,4-position of quinazoline

Quinazoline, acid chlorides, and trimethylsilyl cyanide have been converted to mono-Reissert compounds at the 3,4-position of the quinazoline system. Various reactions of these quinazoline Reissert compounds are reported.     

Isomeric complexes of ruthenium(II) with neutral heterocyclic schiff base ligands. High resolution proton resonance spectra of trans-cis isomeric pairs of RuX2L2 (L = 2-arylpyridinecarboxaldimine, X = Cl, Br) and comparison of their physical properties

The reaction of 2-arylpyridinecarboxaldimine [RH₄C₆NC(H)Py, L (1)] with hydrated RuX₃ (X = Cl, Br) in boiling C₂H₅OH affords dark crystals of RuX₂L₂. Two geometrical isomers of the compound have been isolated and characterized by analytical and spectroscopic data. The trans isomer of RuCl₂L₂ shows a single sharp band for ν(Ru---Cl), whereas two bands are observed for the corresponding cis isomer. The highresolution ¹H NMR spectra of the isolated complexes are reported and completely assigned. All the complexes have multiple t₂→π^*(L) transitions in the visible region. Each of the complexes display a quasi-reversible oxidative response due to an Ru^III/Ru^II couple in the range 0.25–0.40 V vs S.C.E. at a platinum working electrode. The formal potentials of this couple obey the Hammett relationship. The ligand-based irreversible oxidations are also briefly noted.     

New Cu(II) complexes with polydentate chelating Schiff base ligands: Synthesis, structures, characterisations and biochemical activity studies

We have reported herein the synthesis of three new Cu(II) complexes of tri- and tetradentate Schiff base ligands containing N₃ or N₄ donor set along with terminal NNN⁻ or SCN⁻ ligands: [L¹Cu(NCS)]ClO₄ (1), [L²Cu(NCS)₂] (2) and [L³Cu(NNN)]ClO₄ (3) [L¹ = NC₅H₄C(CH₃)=N(CH₂)₃N=C(CH₃)C₅H₄N, L²= Me₂N–(CH₂)₃–N=C(CH₃)C₅H₄N and L³ = NC₅H₄CH=N–(CH₂)₄–N=CHC₅H₄N]. The complexes have been systematically characterised by elemental, spectroscopic and electrochemical techniques. Antimicrobial activities of the Schiff base ligands and their metal complexes have been studied using the disc diffusion method on the strains of Candida tropicalis and Bacillus megaterium. Structures of all the complexes have been unequivocally established from single crystal X-ray diffraction analyses that show the monomeric units containing a five-coordinated copper center in highly distorted square pyramidal geometry with thiocyanate or azide anion coordinated as terminal ligand. The complexes 1 and 3 crystallise in monoclinic (P2₁/c) and 2 in triclinic (P-1) space group, respectively.     

Synthesis,Structures, and Properties of Layered Quaternary Chalcogenides of the General Formula ALnEQ4 (A = K,Rb; Ln = Ce,Pr, Eu; E = Si,Ge; Q = S,Se)

Four related quaternary compounds containing rare‐earth metals have been synthesized employing the molten flux method and metathesis. The reactions of Eu and Rb₂S₅ with Si and Ge in evacuated fused silica ampoules at 725 °C for 150 h yielded RbEuSiS₄ ( I ) and RbEuGeS₄ ( II ), respectively. On the other hand, a reaction between CeCl₃ and K₄Ge₄Se₁₀ at 650 °C for 148 h has yielded KCeGeSe₄ ( III ) and KPrSiSe₄( IV ) was obtained by the reaction of elemental Pr, Si and Se in KCl flux at 850 °C for 168 h. Crystal data for these compounds are as follows: I , orthorhombic, space group P2₁2₁2₁ (#19), a = 6.392(1), b = 6.634(2), c = 17.001(3) Å, α = β = γ = 90°, Z = 4; II , monoclinic, space group P2₁/m (#11), a = 6.498(2), b = 6.689(3), c = 8.964(3) Å, β = 108.647(6)°, Z = 2; III , monoclinic, space group P2₁ (#4), a = 6.852(2), b = 7.025(2), c = 9.017(3) Å, β = 108.116(2)°, Z = 2; IV , monoclinic, space group P2₁ (#4), a = 6.736(2), b = 6.943(2), c = 8.990(1) Å, β = 108.262(2)°, Z = 2. The crystal structures of I ‐ IV contain two‐dimensional corrugated anionic layers of the general formula, [LnEQ₄]^? (Ln = Ce, Pr, Eu; E = Si, Ge and Q = S, Se) alternately piled upon layers of alkali cations. In addition to structural elucidation, Raman and UV‐visible spectroscopy, and magnetic measurements for compound III (KCeGeSe₄) are also discussed.