Synthese und Chiralität von (5S, 6R)-5,6-Epoxy-5,6-dihydro-β,β-carotin und (5R, 6R)-5,6-Dihydro-β,β-carotin-5,6-diol,einem Carotinoid mit ungewöhnlichen Eigenschaften

Synthesis and Chirality of (5S,6R)-5,6-Epoxy-5,6-dihydro-β,β-carotene and (5R,6R)-5,6-Dihydro-β,β-carotene-5,6-diol, a Compound with Unexpected Solubility Characteristics Wittig-condensation of azafrinal ( 1e ) with the phosphorane derived from 7 leads to a (1:3)-mixture of (E)-9′- and (Z)-9′-β,β-carotene-diol 3 , from which pure and optically active 3 ((5R,6R)-5,6-dihydro-β,β-carotene-5,6-diol) has been isolated as bright violet leaflets, m.p. 168°. Due to the trans-configuration of the diol moiety and to severe steric hindrance, hydrogen bonding is reduced to such an extent, that 3 behaves much more as a hydrocarbon than as a diol. There is good evidence that the so-called ‘β-oxycarotin’ obtained by Kuhn & Brockmann [15] by chromic acid oxidation of β, β-carotene is the corresponding racemic cis-diol. 3 has been converted into (5S, 6R)-5,6-epoxy-5.6-dihydro-β,β-carotene ( 4 ), m.p. 156°. This transformation establishes for the first time the chirality of a caroteneepoxide (without other O-functions). Full spectral and chiroptical data including a complete assignement of ¹³C-chemical shifts for azafrin methyl ester and 3 are presented.     

Flash photolysis resonance fluorescence study of the reaction Cl + O3 → ClO + O2 over the temperature range 213–298 K

Rate constants for the removal of Cl atoms in the reaction Cl + O₃ → ClO + O₂ were measured by the flash photolysis resonance fluorescence technique over the temperature range 213–298 K. The rate constant is given by the Arrhenius expression (2.94 ± 0.49) × 10^?11 exp[?(298 ± 39)/T] in units of cm³ molecule^?1 s^?1. Comparison with recent results from other laboratories are presented.     

Lattice parameters and thermal expansion of δ-VN1−x from 298–1000 K

The thermal expansion of VN_1?x was determined from measurements of the lattice parameters in the temperature range of 298–1000 K and in the composition range of VN_0.707–VN_0.996. Within the accuracy of the results the expansion of the lattice parameter with temperature is not dependent on the composition. The lattice parameter as a function of composition ([N]/[V]=0.707?0.996) and temperature (298–1000 K) is given by $$\begin{gathered} a([N]/[V],T) = 0.38872 + 0.02488([N]/[V]) - \hfill \\ - (1.083 \pm 0.021) \cdot 10^{ - 4} T^{1/2} + (6.2 \pm 0.1) \cdot 10^{ - 6} T. \hfill \\ \end{gathered} $$ . The coefficient of linear thermal expansion as a function of temperature (in the same range) is given by $$\alpha (T) = a([N]/[V],T)^{ - 1} [( - 5.04 \pm 0.01) \cdot 10^5 T^{ - 1/2} + (6.2 \pm 0.1) \cdot 10^{ - 6} ].$$ . The average linear thermal expansion coefficient is $$\alpha _{av} = 9.70 \pm 0.15 \cdot 10^{ - 6} K^{ - 1} (298 - 1 000K).$$ . The data are compared with those of several fcc transition metal nitrides collected and evaluated from the literature.     

Die Bestimmung von Derivaten der Kohlensäure über eine saure Verseifung

Zusammenfassung Durch Hydrolyse in siedender, hochkonzentrierter Phosphorsäure läßt sich anscheinend aus allen Kohlensäurederivaten quantitativ Kohlendioxid abspalten. Dieses wird nach Reinigung und Trocknung gravimetrisch bestimmt. Folgende Verbindungen wurden analysiert: lineare und cyklische Harnstoffe, Thioharnstoffe, Urethane, Carbamate, Kohlensäureester, Phenylisocyanat, Melamin, Guanidin, Cyanursäure und Dicyandiamid. Die Anwendung verschiedener Phosphorsäurekonzentrationen erlaubt auch selektive Bestimmungen.

---

The determination of derivatives of carbonic acid via an acidic hydrolysis

Summary Hydrolysis in boiling highly concentrated phosphoric acid seemingly results in the quantitative splitting off of carbon dioxide from all derivatives of carbonic acid. The latter is determined gravimetrically after purification and drying. The following compounds were analyzed: linear and cyclic ureas, thioureas, urethanes, carbamates, esters of carbonic acid, phenylisocyanate, melamine, guanidine, cyanuric acid, dicyandiamide. The use of various concentrations of phosphoric acid permits selective determinations.

---

---

Herrn Prof. Dr.B. Timm zum 60. Geburtstag gewidmet.     

Massenspektrometrische untersuchungen zur elementaranalyse organischer verbindungen—III: Verbrennungsvorgänge im leeren rohr

A measuring system is described which permits study of all stages of combustion processes as functions of carrier gas, temperature, residence time and tube filling. The organic sample is fed at constant speed into a stream of carrier gas. The mixture reaches the combustion chamber within a few milliseconds via a transfer capillary. With the help of a viscous inlet system, a sample of the resulting reaction products is taken and fed into a mass spectrometer. Reaction time and temperature can be adjusted within wide ranges or varied continuously. A plot of the extent of reaction of the various combustion products against temperature at a chosen reaction time yields an oxidation-thermogram which gives a clear picture of the combustion process. It is evident from thermograms of selected compounds that the samples decompose in the presence of oxygen at appreciably lower temperatures than in inert gas. The primary step of the decomposition is “oxidative pyrolysis” which often leads to other products than “inert pyrolysis”. The intermediate products found are partly structurally specific and, especially with nitrogen-containing samples, are numerous and long-lived (for example, carbon monoxide, nitric oxide, cyanogen, hydrocyanic acid, cyanic acid and methyl cyanate). The notorious “difficult combustibility” is largely due to the fact that carbon monoxide, cyanic and hydrocyanic acids undergo complete combustion only at very high temperature. The combustion properties of the “empty tube” can be improved noticeably by a filling of quartz wool and markedly by partly filling with platinum wool.     

Some binuclear complexes of iron and cobalt with isocyanide ligands

Whereas Co₂(CO)₈ and RNC (R= Me, Et, and Cy) react to give mixtures of [(RNC)₅Co] [Co(CO)₄] and the covalent, carbonyl-bridged [(RNC)_mCo₂(CO)_8?m] derivatives (m = 1–3), [(π-dienyl)Fe(CO)₂]₂ give only [(π-dienyl)₂Fe₂(CO)_4?n(CNR)_n] complexes (dienyl = C₅H₅, MeC₅H₄ and C₉H₇; n = 1–2) that exist in solution as mixtures of cis- and trans-CO- and RNC-bridged tautomers with the μ-RNC species decreasing in importance as the bulk of R increases.     

Conformationally Controlled Odor Perception in ‘Steroid-type’ Scent Molecules

A series of compounds possessing a ‘Steroid-type’ scent and related to 4-(4′-t-butylcyclohexyl)-4-methyl-2-pentanones ( 1 and 2 ) has been synthesized. The odor of these compounds has been found to be dependent on their conformation; only when the molecule can assume a steroid-like shape there is an interaction with the odor chemoreceptor.     

Atomabsorptions-Flammenphotometrie im Einstrahlverfahren mit Kompensation der von Flamme und Hintergrundstrahler verursachten Schwankungen

Zusammenfassung Es wird gezeigt, daß auch im Einstrahlverfahren sogar extrem starke Schwankungen der Betriebsparameter der Flamme (Brenngas- und Preßluftdruck, Probendurchsatz) aus dem Meßergebnis weitgehend eliminiert werden können, wenn hinreichend oft Zwischeneichungen vorgenommen werden. Auf die gleiche Weise kann man selbstverständlich auch zeitliche Änderungen der Emission des Hintergrundstrahlers ausschalten. Für die Voruntersuchungen wurde ein aus handelsüblichen Bauteilen zusammengestelltes Gerät benutzt, welches mehr als 15 Zwischeneichungen pro Minute zuläßt. Dabei zeigte sich unter anderem, daß eine Änderung des Probendurchsatzes um den Faktor 10 (innerhalb 1 min) eine Änderung des Extinktionswertes der Probe um den Faktor 4 (also 400%) zur Folge hat. Dagegen beträgt in dieser Meßreihe die größte beobachtete Abweichung einer Einzelmessung des Extinktionsverhältnisses Analysenlösung/Eichlösung vom Mittelwert nur 22%. Abschließend wird ein in der Entwicklung befindliches und weitgehend automatisiertes Gerät vorgeschlagen, welches wesentlich bessere Ergebnisse erwarten läßt.

---

Summary It is shown that even for atomic-absorption analyses with a single-beam instrument, the values measured will be essentially independent on large fluctuations in the operating conditions of the flame (gas pressures and sample flow rate), if the standard measurement made after every sample measurement is repeated often enough. Naturally, with the same technique the variation of emission from the discharge lamp will also not affect the analytical results. For the first experiments an instrument composed of commercially available components was used. It allowed the sample solution and standard solution to be alternately aspirated more than 15 times per minute. It was observed that the extinction value for the sample solution changed by a factor of 4 (that is 400%) when the sample flow rate changed by a factor of 10 (within a minute). On the other hand, in this series of measurements the gratest deviation observed between a single value for the ratio of sample solution extinction/standard solution extinction and the average value amounted to only 22%. Finally, an essentially automatic instrument being developed is proposed. With this instrument considerably better results can be expected.

---

---

Herrn Prof. Dr. R. Herrmann möchte ich auch an dieser Stelle meinen Dank aussprechen für sein reges Interesse am Fortgang der Arbeit und für die kritische Durchsicht des Manuskriptes. Fräulein B. Gutsche danke ich für die Mitarbeit bei der Durchführung und Auswertung der Messungen.