AIPO4 Supported Zinc Borohydride as a Novel Reagent for the Hydration of Aromatic Alkenes and Alkynes

Hydration of aromatic alkenes (styrene, α-methylstyrene and E-stilbene) and alkynes (phenyl and diphenylacetylene) has been achieved by the reaction of the corresponding alkenes or alkynes on zinc borohydride combined with AIPO₄ in DME. Except in the case of α-methylstyrene, Zn(BH₄)₂/AIPO₄ provides a more efficient and selective catalytic system than the combination with SiO₂ or Al₂O₃.     

Inactivation of Vaccinia Virus by Natural Sunlight and by Artificial UVB Radiation

This study determined the sensitivity of vaccinia virus, an orthopox virus commonly used as a surrogate for variola virus (etiological agent of smallpox), exposed to UVB radiation emitted by a solar simulator, or to direct natural sunlight. The data obtained indicate that: (1) the virucidal effect of natural sunlight can be mimicked adequately by an artificial light source with similar spectral characteristics in the UVB, (2) viral sensitivity to UVB or to solar radiation can be correlated with experimental data previously obtained with UVC, (3) the correlation factor between virus inactivation by solar radiation (measured at 300 ± 5 nm) and by UVC (254 nm) is between 33 and 60, and (4) the sensitivity of viruses either dry on glass surfaces or in liquid suspension is similar when in the presence of similar amounts of cellular debris and growth media. The findings reported in this study should assist in estimating the threat posed by the persistence of virus during epidemics or after an accidental or intentional release.     

Ketopiperazines: Conformationally Constrained Peptidomimetic of Arginine Amides

We have synthesized guanidine‐containing ketopiperazines designed to be conformational mimics of peptidomimetic arginine amides. D‐Allylglycine was converted by an efficient approach to give enantiopure ketopiperazines in which the trans stereochemistry of the C‐substituents resulted from stereospecific enolate alkylation.     

The organocatalytic enantioselective [3+2] cycloaddition reaction of α,β-unsaturated aldehydes with azomethine ylides applied to the asymmetric synthesis of densely substituted pyrroloisoquinolines

The synthesis of densely functionalized pyrrolo[2,1-a]isoquinolines was accomplished using the organocatalytic [3+2] cycloaddition between enals and azomethine ylides under iminium catalysis developed in our group some years ago as the key step. The cycloaddition proceeds smoothly yielding the corresponding pyrrolidine as a single endo diastereoisomer with enantiopurity in the range of 94–96% and further manipulations of the obtained cycloadducts using high yielding reaction protocols and a final mesylation/intramolecular N-alkylation sequence allowed the synthesis of target compounds in which the integrity of all stereocenters installed during the first step is maintained.     

Free‐energy differences between states with different conformational ensembles

Multiple conformations separated by high‐energy barriers represent a challenging problem in free‐energy calculations due to the difficulties in achieving adequate sampling. We present an application of thermodynamic integration (TI) in conjunction with the local elevation umbrella sampling (LE/US) method to improve convergence in alchemical free‐energy calculations. TI‐LE/US was applied to the guanosine triphosphate (GTP) to 8‐Br‐GTP perturbation, molecules that present high‐energy barriers between the anti and syn states and that have inverted preferences for those states. The convergence and reliability of TI‐LE/US was assessed by comparing with previous results using the enhanced‐sampling one‐step perturbation (OSP) method. A linear interpolation of the end‐state biasing potentials was sufficient to dramatically improve sampling along the chosen reaction coordinate. Conformational free‐energy differences were also computed for the syn and anti states and compared to experimental and theoretical results. Additionally, a coupled OSP with LE/US was carried out, allowing the calculation of conformational and alchemical free energies of GTP and 8‐substituted GTP analogs. © 2013 Wiley Periodicals, Inc.     

Occurrence of methylated arsenic species in parts of plants growing in polluted soils

Arsenic compounds were determined in extracts of branches, leaves and roots from plants growing in a mining contaminated area. The selected species were Dryopteris filix-max, Quercus pubescens, Dipsacus fullonum, Alnus glutinosa, Buxus sempervirens and Brachythecium cf. reflexum. Total arsenic content in the subsamples was analysed by ICPMS after acidic digestion. In general, concentrations in the plant parts followed the gradient roots?>?branches?>?leaves indicating that they are arsenic-resistant plants. Arsenic species were determined in water/methanol (9?+?1, v/v) extracts by HPLC-ICPMS. Different levels of organoarsenicals were found depending on plant part and plant species. Higher percentages of organoarsenic compounds were recorded in branches and leaves (up to 35% in the boxtree sample), than in roots (0.7–5.2% in the same plant species). The absence of organic arsenic species in the soil where the plants were collected and the low levels of organoarsenicals found in the roots, indicate that the studied plants have the ability to accumulate or synthesise organoarsenic compounds in relatively high percentages, and this information contributes to enlarge the knowledge of arsenic uptake and speciation in plants.     

Proton‐Assisted Hydrogen Activation on Polyhedral Cations

The treatment of [1,1‐(PR₃)₂‐3‐(Py)‐closo‐1,2‐RhSB₉H₈] (PR₃=PMe₃ ( 2 ) or PPh₃ and PMe₃ ( 3 ); Py=pyridine) with triflic acid (TfOH) affords [1,3‐μ‐(H)‐1,1‐(PR₃)₂‐3‐(Py)‐1,2‐RhSB₉H₈]⁺ (PR₃=PMe₃ ( 4 ) or PMe₃ and PPh₃ ( 5 )). These products result from the protonation of the 11‐vertex closo‐cages along the Rh(1)? B(3) edge. These unusual cationic rhodathiaboranes are stable in solution and in the solid state and they have been fully characterized by multinuclear NMR spectroscopy. In addition, compound 5 was characterized by single‐crystal X‐ray diffraction. One remarkable feature in these structures is the presence of three {Rh(PPh₃)(PMe₃)}‐to‐{ηⁿ‐SB₉H₈(Py)} (n=4 or 5) conformers in the unit cell, thus giving an uncommon case of conformational isomerism. [1,1‐(PPh₃)₂‐3‐(Py)‐closo‐1,2‐RhSB₉H₈] ( 1 ), that is, the bis‐PPh₃‐ligated analogue of compounds 2 and 3 , is also protonated by TfOH, but, in marked contrast, the resulting cation, [1,3‐μ‐(H)‐1,1‐(PPh₃)₂‐3‐(Py)‐1,2‐RhSB₉H₈]⁺ ( 6 ), is attacked by a triflate anion with the release of a PPh₃ ligand and the formation of [8,8‐(OTf)(PPh₃)‐9‐(Py)‐nido‐8,7‐RhSB₉H₉] ( 9 ). The result is an equilibrium that involves cationic species 6 , neutral OTf‐ligated compound 9 , and [HPPh₃]⁺, which is formed upon protonation of the released PPh₃ ligand. The resulting ionic system reacts readily with H₂ to give cationic species [8,8,8‐(H)(PPh₃)₂‐9‐(Py)‐nido‐8,7‐RhSB₉H₉]⁺ ( 7 ). This reactivity is markedly higher than that previously found for compound 1 and it introduces a new example of proton‐assisted H₂ activation that occurs on a polyhedral boron‐containing compound.     

Controlled Click‐Assembly of Well‐Defined Hetero‐Bifunctional Cubic Silsesquioxanes and Their Application in Targeted Bioimaging

A general procedure for the assembly of hetero‐bifunctional cubic silsesquioxanes with diverse functionality and a perfectly controlled distribution of functional groups on the inorganic framework has been developed. The method is based on a two‐step sequence of mono‐ and hepta‐functionalization through the ligand‐accelerated copper(I)‐catalyzed azide–alkyne cycloaddition of a readily available octaazido cubic silsesquioxane. The stoichiometry of the reactants and the law of binomial distribution essentially determine the selectivity of the key monofunctionalization reaction when a copper catalyst with strong donor ligands is used. The methodology has been applied to the preparation of a set of bifunctional nano‐building‐blocks with orthogonal reactivity for the controlled assembly of precisely defined hybrid nanomaterials and a fluorescent multivalent probe for application in targeted cell‐imaging. The inorganic cage provides an improved photostability to the covalently attached dye as well as a convenient framework for the 3D multivalent display of the pendant epitopes. Thus, fluorescent bioprobes based on well‐defined cubic silsesquioxanes offer interesting advantages over more conventional fully organic analogues and ill‐defined hybrid nanoparticles and promise to become powerful tools for the study of cell biology and for biomedical applications.     

[Pd(Fmes)2(tmeda)]: A Case of Intermittent C?H⋅⋅⋅F?C Hydrogen‐Bond Interaction in Solution

The X‐ray structure of the title compound [Pd(Fmes)₂(tmeda)] (Fmes=2,4,6‐tris(trifluoromethyl)phenyl; tmeda=N,N,N′,N′‐tetramethylethylenediamine) shows the existence of uncommon C? H???F? C hydrogen‐bond interactions between methyl groups of the TMEDA ligand and ortho‐CF₃ groups of the Fmes ligand. The ¹⁹F NMR spectra in CD₂Cl₂ at very low temperature (157 K) detect restricted rotation for the two ortho‐CF₃ groups involved in hydrogen bonding, which might suggest that the hydrogen bond is responsible for this hindrance to rotation. However, a theoretical study of the hydrogen‐bond energy shows that it is too weak (about 7 kJ mol^?1) to account for the rotational barrier observed (ΔH^≠=26.8 kJ mol^?1), and it is the steric hindrance associated with the puckering of the TMEDA ligand that should be held responsible for most of the rotational barrier. At higher temperatures the rotation becomes fast, which requires that the hydrogen bond is continuously being split up and restored and exists only intermittently, following the pulse of the conformational changes of TMEDA.     

Determination of estrogens in environmental water samples using 1,3‐dipentylimidazolium hexafluorophosphate ionic liquid as extraction solvent in dispersive liquid–liquid microextraction

In this work, the potential of a symmetric dialkyl‐substituted ionic liquid (IL), 1,3‐dipenthylimidazolium hexafluorophosphate ([PPIm][PF₆]), as extraction solvent in dispersive liquid–liquid microextraction (DLLME) has been studied for the analysis of a group of three natural (estriol, 17β‐estradiol, and 17α‐estradiol) and four synthetic (17α‐ethynylestradiol, diethylstibestrol, dienestrol, and hexestrol) estrogenic compounds as well as one mycotoxin with estrogenic activity (zearalenone) in different types of water samples (Milli‐Q, mineral, and wastewater). Separation, determination, and quantification were developed by HPLC‐DAD and a fluorescence detector (FD) connected in series. Factors influencing the IL‐DLLME procedure (sample pH, amount of IL, type and volume of disperser solvent, ionic strength, and assistance of vortex agitation) were investigated and optimized by means of a step‐by‐step approach. Once the optimum extraction conditions were established (10 mL of water at pH 8, 60 mg of [PPIm][PF₆], 500 μL of ACN as disperser solvent and vortex agitation for 1 min), the calibration curves of the whole method (IL‐DLLME‐HPLC‐DAD/FD) were obtained and precision and accuracy were evaluated. It was demonstrated that the developed methodology was repeatable, accurate, and selective with limits of detection in the 0.30–0.57 μg/L and 13.8–37.1 μg/L range for FD and DAD, respectively. Relative recovery values were higher than 85% for the different types of water samples and the Student's t test demonstrated that there were not significant differences between the added and the found concentration.