ITQ-15: the first ultralarge pore zeolite with a bi-directional pore system formed by intersecting 14- and 12-ring channels, and its catalytic implications

The pore topology of ITQ-15 zeolite consists of an ultra-large 14-ring channel that is intersected perpendicularly by a 12-ring pore; acid sites have been introduced in its framework and this unique structure shows advantages over unidirectional ultralarge pore zeolites for diffusing and reacting large molecules.     

Correction: Click activated protodrugs against cancer increase the therapeutic potential of chemotherapy through local capture and activation

Correction for ‘Click activated protodrugs against cancer increase the therapeutic potential of chemotherapy through local capture and activation’ by Kui Wu et al., Chem. Sci., 2021, 12, 1259–1271, DOI: 10.1039/D0SC06099B.

The authors regret that the reference to the bond-breaking bioorthogonal chemistry, termed ‘click-to-release’ was omitted from the original article. In addition, we would like to include a reference describing the synthesis of compound 1, which is an intermediate to the protodrugs described in the original article. These references are listed below as ref. 1 and 2.The Royal Society of Chemistry apologizes for these errors and any consequent inconvenience to authors and readers.     

Differential conductance switching of planar tunnel junctions mediated by oxidation/reduction of functionally protected ferrocene

Planar tunnel junctions were fabricated by self-assembling 1,1'- ferrocenedicarboxylic acid (FDCA) onto native oxides of thermally deposited aluminum films and subsequently depositing a second aluminum film. Junctions were characterized using Reflection-Absorption Fourier Transform Infrared Spectroscopy (RAIRS) and current-voltage (I-V) spectroscopy. Before deposition of the second aluminum film, RAIRS of FDCA and ferrocenecarboxylic acid (FCA) films revealed COO(-), C=O, and Fc ring stretching modes, indicating that both types of molecules can interact strongly with the oxide and remain intact. After deposition, systems exhibited prominent COO(-) modes and weakened C=O modes, indicating further reaction with aluminum/aluminum oxide. Fc ring modes persisted in FDCA systems but disappeared in FCA systems, suggesting that the second COOH group in the FDCA molecule can act as a protecting group for the ferrocene moiety. Cyclic I-V measurements of FDCA tunnel junction systems revealed very strong ( approximately 10-fold) hysteretic differential conductance switching that was both reversible and stable. Control measurements using as prepared junctions, as well as junctions containing 1,6-hexanedioic acid, 1,9-nonanedioic acid, 1,4-dibenzoic acid, or FCA revealed only very weak ( approximately 10%) differential conductance changes. We attribute FDCA junction switching to barrier profile modifications induced by oxidation/reduction of the functionally protected ferrocene moieties.     

Activation energy of single-stranded DNA moving through cross-linked polyacrylamide gels at 300 V/cm effect of temperature on sequencing rate in high-electric-field capillary gel electrophoresis

In DNA sequencing, single-stranded DNA fragments are separated by gel electrophoresis. This separation is based on a sieving mechanism where DNA fragments are retarded as they pass through pores in the gel. In this paper, we present the mobility of DNA sequencing fragments as a function of temperature; mobility is determined in 4% T LongRanger gels at an electric field of 300 V/cm. The temperature dependence is compared with the predictions of the biased reptation model. The model predicts that the fragment length for the onset of biased reptation with stretching increases with the square of temperature; the data show that the onset of biased reptation with stretching decreases with temperature. Biased reptation fails to model accurately the temperature dependence of mobility. We analyzed the data and extracted the activation energy for passage of sequencing fragments through the gel. For fragments containing less than ca. 200 bases, the activation energy increases linearly with the number of bases at a rate of 25 J/mol per base; for longer fragments, the activation energy increases at a rate of 6.5 J/mol per base. This transition in the activation energy presumably reflects a change in conformation of the DNA fragments; small fragments exist in a random coil configuration and larger fragments migrate in an elongated configuration.     

The Interaction of Walsh-Orbitols in Diademane and Related Hydrocarbons

To obtain further information concerning the interaction between Walsh-orbitols of ‘conjugated’ cyclopropane rings, the photoelectron spectra of the following compounds have been recorded: bicyclo[4.1.0]heptane 1 , cis- and trans-tricyclo[5.1.0^{3, 5}]octane 2, 3 , diademane 4 , trans-pentacyclo[3.3.2.0^{2, 9}.0^{4, 10}, 0^{6, 8}]decan 5 and bicyclo[4.1.0]heptene-2 6 . The first bands in the PE.-spectra of these compounds have been assigned on the basis of a ZDO HMO-approximation. For 2 and 4 the value for resonance integral between linked 2p atomic orbitals of two adjacent eclipsed cyclopropane rings is found to be ?1.73 eV.     

Bemerkung zur Gleichheit der Aufspaltungen ΔI (zwischen den ersten beiden π-Ionisationspotentialen) und ΔE (zwischen den entsprechenden π* ← π Übergangsenergien) des Spiro[4,4]nonatetraens. Vorläufige Mitteilung

For a given molecule M, the difference ΔI between the first two vertical ionization potentials I_v,2 and I_v,2 (from MOs ψ₁ and ψ₂) and ΔE between the corresponding singlet-singlet excitation energies E₁ and E₂ (transitions ψ?₁ ←₁, ψ?₁ ψ₂) are related by ΔE = ΔI- (J_2,?1?J_1,?1) ?2(K_1,?1 ? K_2,?1), using Koopmans approximation. A simple MO model suggests that under certain conditions of symmetry and quasi-alternancy (e. g. in spiro[4,4]nonatetraene 1 ) the bracketed differences between the Coulomb- and exchange-integrals should vanish to first order, thus leading to the simple (almost) equality ΔE = ΔI. It is shown that the results from a photoelectron- and electron-spectroscopic investigation of 1 support this conclusion i.e. ΔI = 1.23 eV, ΔE = 1.19 to 1.23 eV.     

Foxby duality and Gorenstein injective and projective modules

In 1966, Auslander introduced the notion of the -dimension of a finitely generated module over a Cohen-Macaulay noetherian ring and found the basic properties of these dimensions. His results were valid over a local Cohen-Macaulay ring admitting a dualizing module (also see Auslander and Bridger (Mem. Amer. Math. Soc., vol. 94, 1969)). Enochs and Jenda attempted to dualize the notion of -dimensions. It seemed appropriate to call the modules with -dimension 0 Gorenstein projective, so the basic problem was to define Gorenstein injective modules. These were defined in Math. Z. 220 (1995), 611--633 and were shown to have properties predicted by Auslander's results. The way we define Gorenstein injective modules can be dualized, and so we can define Gorenstein projective modules (i.e. modules of -dimension 0) whether the modules are finitely generated or not. The investigation of these modules and also Gorenstein flat modules was continued by Enochs, Jenda, Xu and Torrecillas. However, to get good results it was necessary to take the base ring Gorenstein. H.-B. Foxby introduced a duality between two full subcategories in the category of modules over a local Cohen-Macaulay ring admitting a dualizing module. He proved that the finitely generated modules in one category are precisely those of finite -dimension. We extend this result to modules which are not necessarily finitely generated and also prove the dual result, i.e. we characterize the modules in the other class defined by Foxby. The basic result of this paper is that the two classes involved in Foxby's duality coincide with the classes of those modules having finite Gorenstein projective and those having finite Gorenstein injective dimensions. We note that this duality then allows us to extend many of our results to the original Auslander setting.

     

Useful dual Diels-Alder behavior of 2-azetidinone-tethered aryl imines as azadienophiles or azadienes: a beta-lactam-based stereocontrolled access to optically pure highly functionalized indolizidine systems

Imines derived from 4-oxoazetidine-2-carbaldehydes have been found to be versatile Diels-Alder reagents in that they exhibit two reactivity patterns. 2-Azetidinone-tethered imines undergo diastereoselective reaction with Danishefsky's diene in the presence of different Lewis acids. The effect of the amount of catalyst on the conversion rate as well as on the product ratio has been studied. Under standard reaction conditions, indium(III) chloride and zinc(II) iodide provided the best yields, and indium(III) triflate the highest diastereoselectivity in the Lewis acid promoted aza-Diels-Alder cycloaddition. Treatment of the aforementioned imines with cyclopentadiene, 2,3-dimethyl-1,3-butadiene or 3,4-dihydro-2 H-pyran led to cycloadducts arising from inverse electron-demand condensation involving the beta-lactam-tethered aryl imine as the heterodiene component. In addition, the first methodology for preparing indolizidines from beta-lactams has been developed. This process involves amide bond cleavage of the beta-lactam ring in the aza-Diels-Alder cycloadducts with concomitant cyclization. Full chirality transfer occurs when the reaction is performed with an enantiomerically pure substrate.