A simple light-emitted diode-induced fluorescence detector using optical fibers and a charged coupled device for direct and indirect capillary electrophoresis methods

We constructed a simple fluorescence detector for both direct and indirect CE methods using a blue light-emitted diode (470 nm) as excitation source, a bifurcated optical fiber as a waveguide, and a CCD camera as a detector. The connection of all the components is fairly easy even for nonexperts and the use of a CCD camera improves the applicability of this detector compared to the others using PMTs because it permits the recording of 2-D electropherograms or phosphorescence measurements. This detector provides a compact, low cost, and rapid system for the determination of native fluorescence compounds which have high quantum yields by CE with direct fluorescence detection, showing an LOD of 2.6 x 10(-6) M for fluorescein; the determination of fluorescence derivative compounds by CE with direct fluorescence detection, showing an LOD of 1.6 x 10(-7) M for FITC-labeled 1,6-diaminohexane; and nonfluorescence compounds by CE with indirect fluorescence detection with an LOD of 2.7 x 10(-6) M for gallic acid.     

Metal-catalyzed oxidation and epoxidation of alpha-hydroxy vinyl and dienyl sulfoxides

Treatment of acyclic alpha-hydroxyalkyl alpha,beta-unsaturated sulfoxides with t-BuOOH/VO(acac)2 results in rapid oxidation to the unsaturated sulfones followed by an unusual regio- and stereoselective epoxidation at the unsaturated sulfones; this methodology has been applied to the preparation of carbohydrate-like fragments.     

On the correlation of surface charge and energy in non‐thermal plasma‐treated polyethylene

Non‐thermal non‐equilibrium oxidative air 40‐kHz frequency, 13.56‐MHz radiofrequency and 2.46‐GHz microwave discharge plasma treatment were used for modifying low‐density polyethylene foils. The untreated and treated samples were chemically characterised by X‐ray photoelectron spectroscopy. In order to estimate the extent of the plasma sources at distinct treatment times, surface charge and energy were determined by zeta potential (ζ) and surface tension measurements. In addition, the isoelectric points (IEPs) of the studied samples were ascertained, and surface property variations were appraised by ageing time. The overall outcome indicated that ζ‐potential and surface energy progressively changed after each treatment, as well as the influences of ageing on surface features, the IEP shifting to lower pH values and how all of these changes are associated with the new surface chemistry. This contribution seeks to shed light on topics related to polymer science and plasma‐based strategies for surface modification. Copyright © 2014 John Wiley & Sons, Ltd.     

Styrene Emulsion Polymerization above the CMC: New Evidence on Particle Nucleation by means of AFFFF

Summary: The number (N) and size distribution of particles (PSD) of a styrene emulsion polymerization above the CMC were studied by means of asymmetric flow‐field flow fractionation (AF⁴). Bimodal PSDs were obtained, suggesting that coagulation of the primary particles is not as extensive as would be expected, according to the coagulative mechanism. AF⁴ allowed it to be demonstrated that N is constant during interval II, and that the resolution limit of other particle sizing techniques can lead to erroneous mechanistic inferences, from the evolution of N.

Particle size distribution measured at low conversion for the emulsion polymerization of styrene, obtained by AF⁴ and DLS. The initial surfactant (S₀), initiator (I₀) and monomer (M₀) concentrations are indicated in the figure.     

Initial Carbon−Carbon Bond Formation during the Early Stages of Methane Dehydroaromatization

Methane dehydroaromatization (MDA) is among the most challenging processes in catalysis science owing to the inherent harsh reaction conditions and fast catalyst deactivation. To improve this process, understanding the mechanism of the initial C?C bond formation is essential. However, consensus about the actual reaction mechanism is still to be achieved. In this work, using advanced magic‐angle spinning (MAS) solid‐state NMR spectroscopy, we study in detail the early stages of the reaction over a well‐dispersed Mo/H‐ZSM‐5 catalyst. Simultaneous detection of acetylene (i.e., presumably the direct C?C bond‐forming product from methane), methylidene, allenes, acetal, and surface‐formate species, along with the typical olefinic/aromatic species, allow us to conclude the existence of at least two independent C?H activation pathways. Moreover, this study emphasizes the significance of mobility‐dependent host–guest chemistry between an inorganic zeolite and its trapped organic species during heterogeneous catalysis.     

First Highly Efficient and Photostable E and C Derivatives of 4,4‐Difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) as Dye Lasers in the Liquid Phase,Thin Films,and Solid‐State Rods

A new library of E‐ and C‐4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) derivatives has been synthesized through a straightforward protocol from commercially available BODIPY complexes, and a systematic study of the photophysical properties and laser behavior related to the electronic properties of the B‐substituent group (alkynyl, cyano, vinyl, aryl, and alkyl) has been carried out. The replacement of fluorine atoms by electron‐withdrawing groups enhances the fluorescence response of the dye, whereas electron‐donor groups diminish the fluorescence efficiency. As a consequence, these compounds exhibit enhanced laser action with respect to their parent dyes, both in liquid solution and in the solid phase, with lasing efficiencies under transversal pumping up to 73 % in liquid solution and 53 % in a solid matrix. The new dyes also showed enhanced photostability. In a solid matrix, the derivative of commercial dye PM597 that incorporated cyano groups at the boron center exhibited a very high lasing stability, with the laser emission remaining at the initial level after 100 000 pump pulses in the same position of the sample at a 10 Hz repetition rate. Distributed feedback laser emission was demonstrated with organic films that incorporated parent dye PM597 and its cyano derivative. The films were deposited onto quartz substrates engraved with appropriate periodical structures. The C derivative exhibited a laser threshold lower than that of the parent dye as well as lasing intensities up to three orders of magnitude higher.     

Diastereoselective Approach to cis-4-Methyl/thiol-Pipecolic Esters Based on RCM Reaction and Conjugate Michael Addition

A synthetic route for the access to enantiopure cis-4-methyl/thiol-pipecolic esters is presented. It is based on the ring-closing metathesis reaction to build the α,β-unsaturated piperidin-2-one derived from (S)-(–)-phenylethylamine, followed by either diastereoselective conjugate addition of methylorganocuprate allowing access to cis-4-methyl pipecolic ester or by tandem diastereoselective hydrosulforization–thionization reaction providing access to cis-4-thiol pipecolic ethyl esters.     

Selenium bioaccessibility assessment in selenized yeast after "in vitro" gastrointestinal digestion using two-dimensional chromatography and mass spectrometry

In order to investigate the potentially bioavailable selenium-containing compounds in the selenized yeast candidate reference material SEAS 6, a two-dimensional (size exclusion-reversed phase) chromatography approach has been worked out. Electrospray tandem mass spectrometry (ESI Q-TOF MS) was then used for off-line identification of low molecular weigh selenocompounds generated during the gastrointestinal digestion. Selenomethionine (SeMet) was the major compound identified in the gastrointestinal extract while SeMet selenoxide was its main degradation product formed after medium and long-term sample storage, respectively. Total Se and SeMet were quantified in both the soluble extracts and the residue. Results showed that 89+/-3% of total Se was extracted after gastrointestinal digestion, but only 34+/-1% was surprisingly quantified as free SeMet. The rest of Se was present as many other low, medium and high molecular weight Se-species, which could be detected and further characterized by using the two-dimensional chromatography approach proposed here. Interestingly, most of Se-species seemed to be Se-peptides unspecifically produced by the gastrointestinal juice. These results show for the first time that while the efficiency of human gastrointestinal digestion to dissolve Se-containing proteins present in yeast may be high, its efficiency to convert them into free SeMet is much lower. Se-species present in the insoluble residue (not assimilated by the organism), accounting for 11+/-1% of the total Se in selenized yeast, were also studied. After treatment with SDS (denaturing agent) only 13+/-2% of this "insoluble" Se was solubilized, indicating that it was mainly non-protein bound and likely associated to other insoluble matrix components.     

Laser ablation inductively coupled plasma mass spectrometry for direct analysis of the spatial distribution of trace elements in metallurgical-grade silicon

The spatial distribution and concentration of impurities in metallurgical-grade silicon (MG-Si) samples (97–99% w/w Si) were investigated by use of laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The spatial resolution (120 μm) and low limits of detection (mg kg⁻¹) for quality assurance of such materials were studied in detail. The volume-dependent precision and accuracy of non-matrix-matched calibration for quantification of minor elements, using NIST SRM 610 (silicate standard), indicates that LA-ICP-MS is well suited to rapid process control of such materials. Quantitative results from LA-ICP-MS were compared with previously reported literature data obtained by use of ICP-OES and rf-GD-OES. In particular, the distribution of element impurities and their relationship to their different segregation coefficients in silicon is demonstrated. Dedicated to Professor Klaus G. Heumann