Analysis of urban dust (PM<Subscript>2</Subscript>/PM<Subscript>10-2</Subscript>) in Daejeon city by instrumental neutron activation analysis

Summary As part of an air pollution monitoring study, airborne particulate matter (PM₂/PM_10-2) samples were collected from 2000 to 2003 at two sampling sites in an urban region, Daejeon, the middle of Korea. Mass concentrations of both fine and coarse fractions and that of the black carbon in the fine particles were measured using the Gent stacked filter unit sampler and the smoke stain reflectometer, respectively. In the collected samples the concentrations of 24 elements were analyzed using instrumental neutron activation analysis. Monitored data were investigated for their temporal trends under different environmental conditions and their seasonal correlation patterns. Crustal enrichment factors were also estimated to establish the contribution between anthropogenic and crustal origin. Patterns for airborne particle matter (APM) and elemental concentrations, seasonal variation of some marker elements were investigated. The results can be applied for the investigation of further air pollution sources and for the evaluation of air quality.     

Airborne particulates (PM2.5/PM10) monitoring in Korea by instrumental neutron activation analysis

Instrumental neutron activation analysis was used for the analysis of 25 trace elements in airborne particulate matter (PM) for air pollution monitoring. For the collection of air samples, the Gent stacked filter unit low volume sampler and two types of Nuclepore polycarbonate filters were employed. Samples were collected at selected sampling dates in suburban and industrial regions of Daejon city in the Republic of Korea. Mass concentrations and black carbon of PM were measured, and enrichment factors were calculated. The results were used to describe the emission sources and their correlation patterns.     

Studies on the Complexes of N,N′-Bis[o-(diphenylphosphino)benzylidene]ethylenediamine with Transition Metal Ions

The thermodynamic parameters for the interaction of Cu²⁺, Ni²⁺, Co²⁺, Cd²⁺, andAg⁺ with the new title ligand have been determined by titration calorimetry in 50% THF–methanol (V/V) at 25 °C.Ag⁺ exhibited remarkably higher complexation selectivity.Ag⁺ and several transition metal ions have been transportedusing this ligand as carrier in a bulk liquid membrane. CompetitiveAg⁺–M²⁺ transport studies have also beencarried out for the same system. In this membrane transport study, high transport of Ag⁺ was observed in both single and competitiveAg⁺–M²⁺ transport studies. The complexformation of N,N-bis[o-(diphenylphosphino)benzylidene]ethylenediamine (P₂N₂) with silver,[Ag(P₂N₂)] (NO₃), (1) is reported. Complex 1 has been characterized by X-ray crystallography. 1 ismonoclinic, space group P2_1/n (No. 14), with cell dimensionsa = 13.398(4) , b=12.577(5) , c = 21.521(4) , =100.14(2) , V = 3570(2) ³ and Z = 4.     

Performance of hollow-fiber flow field-flow fractionation in protein separation

Since hollow-fiber flow field-flow fractionation (HF FIFFF) utilizes a cylindrical channel made of a hollow-fiber membrane, which is inexpensive and simple in channel assembly and thus disposable, interests are increasing as a potential separation device in cells, proteins, and macromolecules. In this study, performance of HF FIFFF of proteins is described by examining the influence of flow rate conditions and length of fiber (polyacrylonitrile or PAN in this work) on sample recovery as well as experimental plate heights. The interfiber reproducibility in terms of separation time and recovery was also studied. Experiments showed that sample recovery was consistent regardless of the length of fiber when the effective field strength (equivalent to the mean flow velocity at the fiber wall) and the channel void time were adjusted to be equivalent for channels of various fiber lengths. This supported that the majority of sample loss in HF FIFFF separation of apoferritin and their aggregates may occur before the migration process. It is finally demonstrated that HF FIFFF can be applied for characterizing the reduction in Stokes' size of low density lipoproteins from blood plasma samples obtained from patients having coronary artery disease and from healthy donors.     

Separation of carbon nanotubes by frit inlet asymmetrical flow field-flow fractionation

Flow field-flow fractionation (flow FFF), a separation technique for particles and macromolecules, has been used to separate carbon nanotubes (CNT). The carbon nanotube ropes that were purified from a raw carbon nanotube mixture by acidic reflux followed by cross-flow filtration using a hollow fiber module were cut into shorter lengths by sonication under a concentrated acid mixture. The cut carbon nanotubes were separated by using a modified flow FFF channel system, frit inlet asymmetrical flow FFF (FI AFIFFF) channel, which was useful in the continuous flow operation during injection and separation. Carbon nanotubes, before and after the cutting process, were clearly distinguished by their retention profiles. The narrow volume fractions of CNT collected during flow FFF runs were confirmed by field emission scanning electron microscopy and Raman spectroscopy. Experimentally, it was found that retention of carbon nanotubes in flow FFF was dependent on the use of surfactant for CNT dispersion and for the carrier solution in flow FFF. In this work, the use of flow FFF for the size differentiation of carbon nanotubes in the process of preparation or purification was demonstrated.     

Selective Recognition of Calcium Ion through Liquid Membrane

The mole transport rate of alkaline earth metal ions through a bulk liquid membrane and a supported liquid membrane using a series of proton diionizable acyclic polyethers was measured. Among alkaline earth metal ions, the calcium ion was observed to be selectively transported in both single and competitive transport experiments. Potentiometric titration and solution calorimetric titration also gave calcium selectivity over other alkaline earth metal ions. Acyclic polyether bearing a diethylene glycol unit andn-tetradecyl lipophilic chain at the α position of carboxylic acid affords the best selectivity for the calcium ion in bulk and supported liquid membranes.     

Highly stereoselective synthesis of 2,5-disubstituted 3-vinylidene tetetrahydrofurans via Prins-type cyclization

[reaction: see text]. A novel synthetic methodology for 2,5-disubstituted tetrahydrofurans having an allenyl group at the 3-position via Prins-type cyclization was developed. The reaction led to excellent selectivity and moderate to high yields.     

Catalytic combustion of chlorobenzene over V2O5/TiO2 catalysts prepared by the precipitation-deposition method

Catalytic combustion of chlorobenzene over supported vanadium oxides has been investigated. TiO₂ was prepared by the sol-gel method from titanium isopropoxide. The supported vanadium oxide catalysts have been prepared by precipitation-deposition and impregnation method and characterized by XRD, FT-Raman and TPR. In the VO_x/TiO₂catalysts prepared using the impregnation method, when vanadium loading reaches 3 wt.%, the activity shows a maximum. However, in the VO_x/TiO₂catalysts prepared by precipitation-deposition, when vanadium loading reaches 7 wt.%, the activity shows a maximum. This result suggests that the precipitation-deposition can yield a higher metal loading on the support and a high dispersion compared to the impregnation method. This revised version was published online in August 2006 with corrections to the Cover Date.     

State-to-state reaction dynamics of CH3I photodissociation at 304 nm

The detailed reaction dynamics of CH(3)I photodissociation at 304 nm were studied by using high-resolution long time-delayed core-sampling photofragment translation spectroscopy. The vibrational state distributions of the photofragment, i.e., CH(3), are directly resolved due to the high kinetic resolution of this experiment for the first time. CH(3) radicals produced from I((3)Q(0+)), I((1)Q(1) <--( 3)Q(0+)), and I((3)Q(1)) channels are populated in different vibrational state distributions. The I((3)Q(0+)) and I((3)Q(1)) channels show only progressions in the nu2'(a2") umbrella bending mode, and the I((1)Q(1) <-- (3)Q(0+)) channel shows both progression in the nu2' umbrella bending mode and a small amount of excitation in the nu1'(a1') C-H stretching mode. The photodissociation processes from the vibrational hot band of CH(3)I (upsilon3 = 1, upsilon3 = 2) were also detected, primarily because of the absorption probability from the vibrational excited states, i.e., hot bands are relatively enhanced. Photofragments from the hot bands of CH(3)I show a cold vibrational distribution compared to that from the vibrational ground state of CH(3)I. The I* quantum yield and the curve crossing possibility were also studied for the ground vibrational state of CH(3)I. The potential energy at the curve crossing point was calculated to be 32 790 cm(-1) by using the one-dimensional Landau-Zener model.     

Synthesis and crystal structures of novel calix[4]azacrowns

A series of novel 1,3‐altemate calix[4]arene azacrowns having mono and bis crown ethers on the lower rim of the calix[4]arene framework were synthesized. Solid‐state structures confirmed the three dimensional conformation of compounds 1–3.