Preparation and properties of new poly(amide‐imide)s based on 1,4‐bis(4‐trimellitimidophenoxy)naphthalene and aromatic diamines

A diimide dicarboxylic acid, 1,4‐bis(4‐trimellitimidophenoxy)naphthalene (1,4‐BTMPN), was prepared by condensation of 1,4‐bis(4‐aminophenoxy)naphthalene and trimellitic anhydride at a 1 : 2 molar ratio. A series of novel poly(amide‐imide)s (IIa–k) with inherent viscosities of 0.72 to 1.59 dL/g were prepared by triphenyl phosphite‐activated polycondensation from the diimide‐diacid 1,4‐BTMPN with various aromatic diamines (Ia–k) in a medium consisting of N‐methyl‐2‐pyrrolidinone (NMP), pyridine, and calcium chloride. The poly(amide‐imide)s showed good solubility in NMP, N,N‐dimethylacetamide, and N,N‐dimethylformamide. The thermal properties of the obtained poly(amide‐imide)s were examined with differential scanning calorimetry and thermogravimetry analysis. The synthesized poly(amide‐imide)s possessed glass‐transition temperatures in the range of 215 to 263°C. The poly(amide‐imide)s exhibited excellent thermal stabilities and had 10% weight losses at temperatures in the range of 538 to 569°C under a nitrogen atmosphere. A comparative study of some corresponding poly(amide‐imide)s also is presented. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1–8, 2000     

Preparation and properties of imide‐containing elastic polymers from elastic polyureas and pyromellitic dianhydride

A new approach to obtain imide‐containing elastic polymers (IEPs) via elastic and high‐molecular‐weight polyureas, which were prepared from α‐(4‐aminobenzoyl)‐ω‐[(4‐aminobenzoyl)oxy]‐poly(oxytetramethylene) and the conventional diisocyanates such as tolylene‐2,4‐diisocyanate(2,4‐TDI), tolylene‐2,6‐diisocyanate(2,6‐TDI), and 4,4′‐diphenylmethanediisocyanate (MDI), was investigated. IEP solutions were prepared in high yield by the reaction of the polyureas with pyromellitic dianhydride in N‐methyl‐2‐pyrrolidone (NMP) at 165°C for 3.7–5.2 h. IEPs were obtained by the thermal treatment at 200°C for 4 h in vacuo after NMP was evaporated from the resulting IEP solutions. We assumed a mechanism of the reaction via N‐acylurea from the identification of imide linkage and amid acid group in IEP solutions. NMR and FTIR analyses confirmed that IEPs were segmented polymers composed of imide hard segment and poly(tetramethylene oxide) (PTMO) soft segment. The dynamic mechanical and thermal analyses indicated that the IEPs prepared from 2,6‐TDI and MDI showed a glass‐transition temperature (T_g ) at about −60°C, corresponding to T_g of PTMO segment, and suggested that microphase‐separation between the imide segment and the PTMO segment occured in them. TGA studies indicated the 10% weight‐loss temperatures (T₁₀) under air for IEPs were in the temperature range of 343–374°C. IEPs prepared from 2,6‐TDI and MDI showed excellent tensile properties and good solvent resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 715–723, 2000     

Cationic polymerization of cyclic ketene acetals via zwitterion formation with cyanoallene

This article deals with the polymerization of the cyclic ketene acetals (CKAs) 2‐methylene‐4‐phenyl‐1,3‐dioxolane (2), 2‐methylene‐4‐phenyl‐1,3‐dioxane (3), 4,7‐dimethyl‐2‐methylene‐1,3‐dioxepane (4), 2‐ethylidene‐4‐phenyl‐1,3‐dioxolane (5), 2‐phenylmethylene‐1,3‐dioxolane (6), and 2‐isopropylidene‐4‐phenyl‐1,3‐dioxolane (7) in the presence of cyanoallene (1). For 2 and 3, the homopolymerization of the CKAs proceeded without ring opening, and the number‐average molecular weights of the obtained polymers depended on the feed ratio of 1. However, the reactions of 1 with 4–7 afforded no polymers but did afford spirocyclic 1 : 1 adducts possessing cyclobutane rings. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2075–2081, 2000     

Synthesis and characterization of new type soluble poly(amide–imide)s based on 6FDA imide modified polyterephthalamides

A series of new poly(amide–imide)s (PAIs, series III ) with good processability and characteristics was synthesized by utilizing organosoluble polyimide (PI, 6FDA–PI series) to improve poor‐solubility polyamide (PA, PTPA series), which used terephthalic acid (TPA) as a monomer. The III series PAIs were synthesized starting from the 2 : 1 molar ratio of aromatic diamines ( I ) and 6FDA to prepare imide ring‐preformed diamines ( II ) and then reacted with equimolar amount of TPA by direct polycondensation. Furthermore, by adjustment of the stoichiometry of the I , II, and TPA monomers, PAIs IV having various components were prepared. Most of the resulting PAIs having inherent viscosities between 0.70 and 1.74 dL/g were obtained in quantitative yields, and they were readily soluble in polar solvents such as N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidone, dimethylformamide, and dimethyl sulfoxide. All of the soluble PAIs afforded transparent, flexible, and tough films. The glass‐transition temperatures of PAIs III were in the range of 236–256 °C, and the 10% weight loss temperatures were recorded at 522–553 °C in nitrogen. The char yields of the III series polymers in nitrogen atmosphere were all higher than 56% even at 800 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 93–104, 2001     

Activatable 19F MRI Nanoparticle Probes for the Detection of Reducing Environments

¹⁹F magnetic resonance imaging (MRI) probes that can detect biological phenomena such as cell dynamics, ion concentrations, and enzymatic activity have attracted significant attention. Although perfluorocarbon (PFC) encapsulated nanoparticles are of interest in molecular imaging owing to their high sensitivity, activatable PFC nanoparticles have not been developed. In this study, we showed for the first time that the paramagnetic relaxation enhancement (PRE) effect can efficiently decrease the ¹⁹F NMR/MRI signals of PFCs in silica nanoparticles. On the basis of the PRE effect, we developed a reduction‐responsive PFC‐encapsulated nanoparticle probe, FLAME‐SS‐Gd³⁺ (FSG). This is the first example of an activatable PFC‐encapsulated nanoparticle that can be used for in vivo imaging. Calculations revealed that the ratio of fluorine atoms to Gd³⁺ complexes per nanoparticle was more than approximately 5.0×10², resulting in the high signal augmentation.     

An Enhanced Affine Projection Algorithm Based on the Adjustment of Input-Vector Number

An enhanced affine projection algorithm (APA) is proposed to improve the filter performance in aspects of convergence rate and steady-state estimation error, since the adjustment of the input-vector number can be an effective way to increase the convergence rate and to decrease the steady-state estimation error at the same time. In this proposed algorithm, the input-vector number of APA is adjusted reasonably at every iteration by comparing the averages of the accumulated squared errors. Although the conventional APA has the constraint that the input-vector number should be integer, the proposed APA relaxes that integer-constraint through a pseudo-fractional method. Since the input-vector number can be updated at every iteration more precisely based on the pseudo-fractional method, the filter performance of the proposed APA can be improved. According to our simulation results, it is demonstrated that the proposed APA has a smaller steady-state estimation error compared to the existing APA-type filters in various scenarios.     

Pharmacokinetics of Nafamostat,a Potent Serine Protease Inhibitor,by a Novel LC-MS/MS Analysis

Nafamostat, a synthetic serine protease inhibitor, has been used for the treatment of inflammatory diseases such as pancreatitis. Recently, an increasing number of studies have shown the promising antiviral effects of nafamostat for the treatment of coronavirus disease-19 (COVID-19). This study aimed to develop a novel liquid chromatography–tandem mass spectrometry (LC-MS/MS) analysis and to characterize the pharmacokinetics of nafamostat in rats. Nafamostat in the rat plasma was extracted by solid phase extraction, and ¹³C₆-nafamostat was used as an internal standard. The quantification limit of nafamostat in the rat plasma was 0.5 ng/mL. The LC-MS/MS method was fully validated and applied to characterize the pharmacokinetics of nafamostat in rats. Following intravenous injection (2 mg/kg), nafamostat in the plasma showed a multiexponential decline with an average elimination half-life (t_1/2) of 1.39 h. Following oral administration of nafamostat solutions (20 mg/kg) in 10% dimethyl sulfoxide (DMSO) and in 10% DMSO with 10% Tween 80, nafamostat was rapidly absorbed, and the average oral bioavailability was 0.95% and 1.59%, respectively. The LC-MS/MS method and the pharmacokinetic information of nafamostat could be helpful for the further preclinical and clinical studies of nafamostat.     

End‐functionalization of polystyrene by malto‐oligosaccharide generating aggregation‐tunable polymeric reverse micelle

This article describes that glucose, maltose, maltotriose, maltotetraose, maltopentaose, and maltohexaose ( a , b , c , d , e , and f , respectively) were introduced into the initiating chain‐end of polystyrene (PSt) through the 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO)‐mediated radical polymerization. A series of glycoconjuaged TEMPO‐adducts, 1a–f , was synthesized and used as the initiators for the polymerization of styrene (St) for 6 h at 120 °C to afford the end‐functionalized PSt's with the acetyl saccharides, 2a–f , in the yields of 37–43%. For 2a–f obtained by the polymerizations using the [St]/[ 1 ] of 125, 250, and 500, the number‐average molecular weights determined by size exclusion chromatography (SEC), M_n,SEC's, were 4800–6300, 8800–10,600, and 18,400–25,200, respectively, which fairly agreed with the predicted values. The end‐functionalized PSt's with saccharides, 3a–f , which were obtained from the deacetylation of 2a–f using sodium methoxide in dry THF, formed the polymeric reverse micelles consisting of a saccharide‐core and a PSt‐shell in chloroform and toluene. The static laser light scattering (SLS) measurements provided the average molar mass of the aggregates in toluene, M_w,SLS's, which ranged from 7.50 × 10⁴ to 1.77 × 10⁵ for 3a , from 1.90 × 10⁵ to 4.93 × 10⁵ for 3b , from 4.41 × 10⁵ to 7.21 × 10⁵ for 3c , from 5.85 × 10⁵ to 8.51 × 10⁵ for 3d , from 7.55 × 10⁵ to 8.53 × 10⁵ for 3e , and from 8.54 × 10⁵ to 9.26 × 10⁵ for 3f . The aggregation numbers, N_agg's, which were calculated from the M_w,SLS's, were from 7 to 24 for 3a , from 20 to 37 for 3b , from 34 to 89 for 3c , from 39 to 116 for 3d , from 41 to 145 for 3e , and from 31 to 146 for 3f . It was confirmed that the aggregation property, such as the M_w,SLS or N_agg values, was strongly related to the polymerization degrees of St (DP's) or the number of the glucose residues (n's) for 3a–f . © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4864–4879, 2006