Styrene polymerization in ternary microemulsions: effects of water-soluble and oil-soluble initiators

The polymerization of styrene in ternary microemulsions stabilized by the cationic surfactant tetradecyltrimethylammonium bromide was studied as a function of concentrations of water-soluble (potassium persulfate, KPS) and oil-soluble (AIBN) initiators. At a particular molar ratio of the initiators, similar maximum rates of polymerization can be achieved from using both types of the initiators. In addition, both initiated systems produced microlatexes with similar hydrodynamic radius, number of polymer particles, molecular weight of polystyrene and number of polymer chain per latex particle. But the dependencies of these latex parameters on concentrations of KPS and AIBN may not be the same. The polymerization mechanism appears to be similar, irrespective of using KPS or AIBN. It is discussed in terms of effective radicals produced for the polymerization. While the different dependencies of some latex parameters on concentrations of the initiators are attributed to the different efficiencies of the initiators in producing effective radicals.     

Efficient chemoselective deprotection of silyl ethers using catalytic 1-chloroethyl chloroformate in methanol

Fast and chemoselective desilylation of silyl-protected alcohols was achieved using a catalytic amount of 1-chloroethyl chloroformate in methanol. With a minimal amount of 1-chloroethyl chloroformate as the source for anhydrous HCl, extremely efficient cleavage of silyl ethers of primary and secondary alcohols was accomplished, and chemoselective deprotection of one silyl ether in the presence of another silyl or other acid-labile group was possible through controlling the amount of the chloroformate and reaction time.     

A novel synthetic route to 2-halo-3,4-dicyanopyridines

2-Bromo-3,4-dicyanopyridine 2 was obtained in moderate yield by reacting 1,1,2,2-tetracyano-3-trimethylsiloxycyclobutane 1 with phosphorus tribromide. Similarly, reaction of 1 with chlorinating reagents such as thionyl chloride and oxalyl chloride led to the corresponding 2-chloro-3,4-dicyanopyridine 3 in 40% yield. A reaction mechanism is suggested.     

Capillary electrophoresis with wavelength-resolved laser-induced fluorescence detection

Capillary electrophoresis (CE) enables rapid separations with high separation efficiency and compatibility with small sample volumes. Laser-induced fluorescence detection can result in extremely low limits of detection in CE. Single-channel fluorescence detection, however, furnishes little qualitative information about a species being detected, except for its CE migration time. Use of multidimensional information often enables unambiguous identification of analytes. Combination of CE with information-rich wavelength-resolved fluorescence detection is analogous with ultraviolet-visible diode-array detection and furnishes both qualitative and quantitative chemical information about target species. This review discusses recent advances in wavelength-resolved laser-induced fluorescence detection coupled with CE, with an emphasis on instrument design.     

Analysis of microgram amounts of particulate material by simultaneous multiwavelength AES

A unique simultaneous emission spectrograph is utilized to perform qualitative and quantitative analysis on trace quantities of solid particulates. The atomic emission spectroscopic system consists of a direct current plasma source and an echelle spectrograph with a charge injection device detector, enabling the system to simultaneously measure the wavelength range from 220 nm to 520 nm with 0.02 nm resolution at 300 nm. Monitoring all wavelengths simultaneously allows the qualitative and quantitative determination of most major and minor constituent in a trace quantity of sample with little prior knowledge about the sample. The ability to perform qualitative and quantitative analysis on particulates is demonstrated by evaluating NBS certified coal fly ash, as well as a sample taken from the respirator air filter at an acute care unit in a hospital.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Highly enantioselective synthesis of alpha-alkyl-alanines via the catalytic phase-transfer alkylation of 2-naphthyl aldimine tert-butyl ester by using O(9)-allyl-N(1)-2',3',4'-trifluorobenzylhydrocinchonidinium bromide

Systematic investigations to develop an efficient enantioselective synthetic method for alpha-alkyl-alanine by catalytic phase-transfer alkylation were performed. The alkylation of 2-naphthyl aldimine tert-butyl ester, 1E, with RbOH and O(9)-allyl-N-2',3',4'-trifluorobenzylhydrocinchonidinium bromide, 6, at -35 degrees C showed the highest enantioselectivities, up to 96% ee.     

Chromatographic characteristics of cholesterol-imprinted polymers prepared by covalent and non-covalent imprinting methods

Cholesterol-imprinted polymers were prepared in bulk polymerization by the methods of covalent and non-covalent imprinting. The former involved the use of a template-containing monomer, cholesteryl (4-vinyl)phenyl carbonate, while the latter used the complexes of template and functional monomer, methacrylic acid or 4-vinylpyridine prior to polymerization. Columns packed with these molecularly imprinted polymers (MIPs) were all able to separate cholesterol from other steroids. For different combinations of cholesterol and beta-estradiol concentrations in a total of 1 g/l, the peak retention times for both compounds were nearly constant. The adsorption capacity for cholesterol onto the MIPs was found to significantly depend on the use of functional monomers, but the selectivity factors were only slightly different from each other at 2.9 to 3.2 since the separation was all based on the specific binding of cholesterol to recognition sites formed on the imprinted polymers. The capacity factors for cholesterol were determined to be 3.5, 4.0 and 3.1, respectively, for covalently imprinted, 4-vinylpyridine-based, and methacrylic acid-based non-covalently imprinted polymers. However, the covalently imprinted polymer was found to have a higher adsorption capacity for cholesterol and about fivefold higher chromatographic efficiency for cholesterol separation, in comparison with non-covalently imprinted polymers. The use of covalent imprinting significantly reduced the peak broadening and tailing. This advantage along with constant retention suggests that the covalently imprinted polymer has potential for quantitative analysis.     

Ruthenium‐catalyzed formal alkyl group transfer: Synthesis of quinolines from nitroarenes and alkylammonium halides

Nitroarenes are reductively cyclized with an array of tetraalkylammonium halides and trialkylarnmonium chlorides in the presence of a catalytic amount of a ruthenium catalyst along with tin(II) chloride dihydrate at 180° to afford the corresponding quinolines in moderate to good yields. The addition of tin(II) chloride dihydrate is necessary for the effective formation of quinolines and toluene is the solvent of choice. A reaction pathway involving initial reduction of nitroarenes to anilines and conversion of alkylammonium halides to alkylamines, alkyl group transfer from alkylamines to anilines to form an imine, dimerization of imine, and heteroannulation is proposed for this catalytic process.     

Kinetics and mechanism of benzylamine additions to ethyl alpha-acetyl-beta-phenylacrylates in acetonitrile

Kinetic studies of the addition of benzylamines to a noncyclic dicarbonyl group activated olefin, ethyl alpha-acetyl-beta-phenylacrylate (EAP), in acetonitrile at 25.0 degrees C are reported. The rates are lower than those for the cyclic dicarbonyl group activated olefins. The addition occurs in a single step with concurrent formation of the Calpha-N and Cbeta-H bonds through a four-center hydrogen bonded transition state.The kinetic isotope effects (kH/kD > 1.0) measured with deuterated benzylamines (XC6H4CH2ND2) increase with a stronger electron acceptor substituent (deltasigmaX > 0) which is the same trend as those found for other dicarbonyl group activated series (1-4), but is in contrast to those for other (noncarbonyl) group activated series (5-9). For the dicarbonyl series, the reactivity-selectivity principle (RSP) holds, but for others the anti-RSP applies. These are interpreted to indicate an insignificant imbalance for the former, but substantial lag in the resonance delocalization in the transition state for the latter series.