Improvement of Biological Effects of Root-Filling Materials for Primary Teeth by Incorporating Sodium Iodide

Therapeutic iodoform (CHI₃) is commonly used as a root-filling material for primary teeth; however, the side effects of iodoform-containing materials, including early root resorption, have been reported. To overcome this problem, a water-soluble iodide (NaI)-incorporated root-filling material was developed. Calcium hydroxide, silicone oil, and NaI were incorporated in different weight proportions (30:30:X), and the resulting material was denoted DX (D5~D30), indicating the NaI content. As a control, iodoform instead of NaI was incorporated at a ratio of 30:30:30, and the material was denoted I30. The physicochemical (flow, film thickness, radiopacity, viscosity, water absorption, solubility, and ion releases) and biological (cytotoxicity, TRAP, ARS, and analysis of osteoclastic markers) properties were determined. The amount of iodine, sodium, and calcium ion releases and the pH were higher in D30 than I30, and the highest level of unknown extracted molecules was detected in I30. In the cell viability test, all groups except 100% D30 showed no cytotoxicity. In the 50% nontoxic extract, D30 showed decreased osteoclast formation compared with I30. In summary, NaI-incorporated materials showed adequate physicochemical properties and low osteoclast formation compared to their iodoform-counterpart. Thus, NaI-incorporated materials may be used as a substitute for iodoform-counterparts in root-filling materials after further (pre)clinical investigation.     

Quantum key distribution based on arbitrarily weak distillable entangled states

States with private correlations but little or no distillable entanglement were recently reported. Here, we consider the secure distribution of such states, i.e., the situation when an adversary gives two parties such states and they have to verify privacy. We present a protocol which enables the parties to extract from such untrusted states an arbitrarily long and secure key, even though the amount of distillable entanglement of the untrusted states can be arbitrarily small.     

The photodegradation of cadmium yellow paints in Henri Matisse’s Le Bonheur de vivre (1905–1906)

Evidence for the alteration of the yellow paints in Henri Matisse’s Le Bonheur de vivre (1905–1906, The Barnes Foundation) has been observed since the 1990s. The changes in this iconic work of Matisse’s Fauvist period include lightening, darkening, and flaking of the yellow paints. Handheld X-ray fluorescence (XRF) and multispectral imaging surveys reveal that the degradation is confined to cadmium yellow (CdS) paints. The discoloration of cadmium yellow paints in Impressionist, Post-Impressionist and early modernist work from the 1880s through the 1920s has been ascribed to the photo-oxidative degradation of CdS. Preliminary investigations of the degraded yellow paints in this work involved Cd L_III-edge X-ray Absorption Near Edge Spectroscopy (XANES) at the Stanford Synchrotron Radiation Light Source (SSRL Menlo Park, California) and Scanning Electron Microscopy-energy dispersive X-ray analysis (SEM-EDS) at the Winterthur Museum Scientific Research and Analysis Laboratory. To determine if the visual changes in the paints did in fact indicate photo-oxidative degradation and if different chemistries could be observed for the lightened versus darkened regions, synchrotron radiation-micro Fourier Transform InfraRed (SR-μFTIR) spectroscopy, X-ray Fluorescence (SR-μXRF) mapping and micro X-ray Absorption Near Edge Spectroscopy (μXANES) mapping at the Cd L_III-edge of the altered paint cross-sections were carried out at the European synchrotron radiation facility (ESRF, Grenoble, France) beamline ID-21. The goal is to elucidate the discoloration mechanisms observed in the paint using elemental and speciation mapping. The μXANES mapping and SR-FTIR imaging showed a substantial enrichment of CdCO₃ in the off-white surface crust of the faded/discolored CdS paint. This suggests that the CdCO₃ is present as an insoluble photodegradation product rather than solely a paint filler or starting reagent. Additionally, oxalates and sulfates were found to be concentrated at the alteration surface.     

Chaotic Dynamics in an Electronic Model of a Genetic Network

We consider dynamics in a class of piecewise-linear ordinary differential equations and in an electronic circuit that model genetic networks. In these models, gene activity varies continuously in time. However, as in Boolean or discrete-time switching networks, gene activity is driven high or low based only on whether the activities of the regulating genes are high or low (i.e., above or below certain thresholds). Depending on the “regulatory logic”, these models can exhibit simple dynamics, like stable fixed points or oscillation, or chaotic dynamics. The observed qualitative and quantitative differences between the dynamics in the idealized equations and the dynamics in the electronic circuit lead us to focus attention on the analysis of the dynamics as a function of parameter values. We propose new techniques for solving the inverse problem – the problem of inferring the regulatory logic and parameters from time series data. We also give new symbolic and statistical methods for characterizing dynamics in these networks.     

Ensuring Quality of Experience in the Connected Home: A New Battleground for Quality of Experience Differentiation

ABSTRACT

The connected home is a critical part of the network—but one that has seen little in the way of true investment in recent years. With customer loyalty and churn directly linked to quality of experience, this is a part of the network that no players in the supply chain can afford to ignore any longer. Beyond broadband experience, the addition of smart technology to the connected home also represents one of the biggest revenue growth areas in the consumer telecoms market for some time. From both a churn-reduction and a revenue-growth perspective, investment in the connected home network must accelerate. This article outlines the key trends identified by Ovum in the connected home space for 2016 and beyond.     

Arbitrary precision composite pulses for NMR quantum computing

We discuss the implementation of arbitrary precision composite pulses developed using the methods of Brown et al. [K.R. Brown, A.W. Harrow, I.L. Chuang, Arbitrarily accurate composite pulse sequences, Phys. Rev. A 70 (2004) 052318]. We give explicit results for pulse sequences designed to tackle both the simple case of pulse length errors and the more complex case of off-resonance errors. The results are developed in the context of NMR quantum computation, but could be applied more widely.     

First-principles prediction and partial characterization of the vibrational states of water up to dissociation

A new, accurate, global, mass-independent, first-principles potential energy surface (PES) is presented for the ground electronic state of the water molecule. The PES is based on 2200 energy points computed at the all-electron aug-cc-pCV6Z IC-MRCI(8,2) level of electronic structure theory and includes the relativistic one-electron mass-velocity and Darwin corrections. For H₂¹⁶O, the PES has a dissociation energy of D₀ = 41 109 cm⁻¹ and supports 1150 vibrational energy levels up to 41 083 cm⁻¹. The deviation between the computed and the experimentally measured energy levels is below 15 cm⁻¹ for all the states with energies less than 39 000 cm⁻¹. Characterization of approximate vibrational quantum numbers is performed using several techniques: energy decomposition, wave function plots, normal mode distribution, expectation values of the squares of internal coordinates, and perturbing the bending part of the PES. Vibrational normal mode labels, though often not physically meaningful, have been assigned to all the states below 26 500 cm⁻¹ and to many more above it, including some highly excited stretching states all the way to dissociation. Issues to do with calculating vibrational band intensities for the higher-lying states are discussed.     

Ex vivo study of carotid endarterectomy specimens: quantitative relaxation times within atherosclerotic plaque tissues

Purpose

Previous studies reporting relaxation times within atherosclerotic plaque have typically used dedicated small-bore high-field systems and small sample sizes. This study reports quantitative T₁, T₂ and T₂^? relaxation times within plaque tissue at 1.5 T using spatially co-matched histology to determine tissue constituents.

Methods

Ten carotid endarterectomy specimens were removed from patients with advanced atherosclerosis. Imaging was performed on a 1.5-T whole-body scanner using a custom built 10-mm diameter receive-only solenoid coil. A protocol was defined to allow subsequent computation of T₁, T₂ and T₂^? relaxation times using multi-flip angle spoiled gradient echo, multi-echo fast spin echo and multi-echo gradient echo sequences, respectively. The specimens were subsequently processed for histology and individually sectioned into 2-mm blocks to allow subsequent co-registration. Each imaging sequence was imported into in-house software and displayed alongside the digitized histology sections. Regions of interest were defined to demarcate fibrous cap, connective tissue and lipid/necrotic core at matched slice-locations. Relaxation times were calculated using Levenberg-Marquardt's least squares curve fitting algorithm. A linear-mixed effect model was applied to account for multiple measurements from the same patient and establish if there was a statistically significant difference between the plaque tissue constituents.

Results

T₂ and T₂^? relaxation times were statistically different between all plaque tissues (P=.026 and P=.002 respectively) [T₂: lipid/necrotic core was lower 47±13.7 ms than connective tissue (67±22.5 ms) and fibrous cap (60±13.2 ms); T₂^?: fibrous cap was higher (48±15.5ms) than connective tissue (19±10.6 ms) and lipid/necrotic core (24±8.2 ms)]. T₁ relaxation times were not significantly different (P=.287) [T₁: Fibrous cap: 933±271.9 ms; connective tissue (1002±272.9 ms) and lipid/necrotic core (1044±304.0 ms)]. We were unable to demarcate hemorrhage and calcium following histology processing.

Conclusions

This study demonstrates that there is a significant difference between qT₂ and qT₂^? in plaque tissues types. Derivation of quantitative relaxation times shows promise for determining plaque tissue constituents.     

Density-fluctuation-induced swelling of polymer thin films in carbon dioxide

We report an anomalous swelling of polymer thin films in carbon dioxide (CO(2)) which is associated (in both locus and form) with the density fluctuation ridge that forms along the extension of the coexistence curve of gas and liquid in the P-T phase diagram. Neutron reflectivity results showed that CO(2) could be sorbed to a large extent ( approximately 60%) in thin polymer films even when the bulk miscibility of the polymer with CO(2) is very poor. The anomalous swelling is found to scale with the polymer radius of gyration (R(g)) and extends to a distance approximately 10 R(g).