Regioselective coupling of pentafluorophenyl substituted alkynes: mechanistic insight into the zirconocene coupling of alkynes and a facile route to conjugated polymers bearing electron-withdrawing pentafluorophenyl substituents

The reaction of Cp(2)ZrCl(2) with 2 equiv of BuLi at -78 degrees C, followed by the addition of an unsymmetrical tetra- or pentafluorophenyl substituted alkyne R(1)C[triple bond]CAr(f) (R(1), Ar(f) = (CH(2))(4)Me, p-C(6)F(4)H; Me, p-C(6)F(4)H; Ph, C(6)F(5)), resulted in regioselective couplings of these alkynes to zirconacyclopentadienes in which the Ar(f) substituents preferentially adopt the 3,4-positions (beta beta) of the zirconacyclopentadiene ring. With Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) as the zirconocene reagent, the couplings could be carried out at room temperature; however, at higher temperatures significant quantities of the 2,4-fluoroaryl substituted (alpha beta) isomers were also formed. None of the conditions employed produced the 2,5-fluoroaryl substituted (alpha alpha) isomers. These fluoroaryl-substituted zirconacyclopentadienes were readily converted to butadienes via reactions with acids. The zirconacyclopentadiene Cp(2)ZrC(4)-2,5-Ph(2)-3,4-(C(6)F(5))(2), which resulted from the coupling of PhC[triple bond]C(C(6)F(5)), was converted to the corresponding thiophene by reaction with S(2)Cl(2), and to an arene by reaction with MeO(2)CC[triple bond]CCO(2)Me/CuCl. Mechanistic studies on zirconocene couplings of (p-CF(3)C(6)H(4))C[triple bond]C(p-MeC(6)H(4)) indicate that the observed regioselectivities are determined by an electronic factor that controls the orientation of at least one of the two alkynes as they are coupled. Additionally, these studies suggest an unsymmetrical transition state for the zirconocene coupling of alkynes, and this is supported by DFT calculations. The reaction of [(C(6)F(5))C[triple bond]CCH(2)](2)CH(2) with Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) resulted in a zirconacyclopentadiene in which the pentafluorophenyl substituents have been forced into the 2,5-positions (alpha alpha). Zirconocene coupling of the diyne (C(6)F(5))C[triple bond]C-1,4-C(6)H(4)-C[triple bond]C(C(6)F(5)) provided a route to conjugated polymers bearing electron-withdrawing pentafluorophenyl groups.     

PHOTOSENSITIZATION OF MURINE TUMOR, VASCULATURE and SKIN BY 5-AMINOLEVULINIC ACID-INDUCED PORPHYRIN

Abstract— The effects of topical and systemic administration of 5-aminolevulinic acid (ALA) were examined in several murine tumor systems with regard to porphyrin accumulation kinetics in tumor, skin and blood, vascular and tumor cell photosensitization and tumor response after light exposure. Marked, transient increases in porphyrin levels were observed in tumor and skin after systemic and topical ALA. Rapid, transient, dose-dependent porphyrin increases were also observed in blood; these were pronounced after systemic ALA injection and mild after topical application. They were highest within 1 h after ALA injection, thereafter declining rapidly. This matched the clearing kinetics of injected exogenous protoporphyrin IX (PpIX). Initially, vascular photosensitivity changed inversely to blood porphyrin levels, increasing gradually up to 5 h post-ALA, as porphyrin was clearing from the bloodstream. This pattern was again matched by injected, exogenous PpIX. After therapeutic tumor treatment vascular disruption of the tumor bed, while observed, was incomplete, especially at the tumor base. Minimal direct tumor cell kill was found at low photodynamic therapy (PDT) doses (250 mg/kg ALA, 135 J/cm² light). Significant, but limited (<1 log) direct photodynamic tumor cell kill was obtained when the PDT dose was raised to 500 mg/kg systemic ALA, followed 3 h later by 270 J/cm², a dose that was however toxic to the animals. The further reduction of clonogenic tumor cells over 24 h following treatment was moderate and probably limited by the incomplete disruption of the vasculature. Tumor responses were highest when light treatment was carried out at the time of highest tumor porphyrin content rather than at the time of highest vascular photosensitivity. Tumor destruction did not reach the tumor base, regardless of treatment conditions.     

Direct evidence of oxidized gold on supported gold catalysts

Supported gold catalysts have drawn worldwide interest due to the novel properties and potential applications in industries. However, the origin of the catalytic activity in gold nanoparticles is still not well understood. In this study, time-of-flight secondary ion mass spectroscopy (TOF-SIMS) has been applied to investigate the nature of gold in Au (1.3 wt %)/gamma-Al2O3 and Au (2.8 wt %)/TiO2 catalysts prepared by the deposition-precipitation method. The SIMS spectrum of the supported gold catalysts presented AuO-, AuO2-, and AuOH- ion clusters. These measurements show direct evidence for oxidized gold on supported gold catalysts and may be helpful to gaining better understanding of the origin of the catalytic activity.     

Reactions of N-silylphosphoranimines with alcohols: synthesis and structure of cyclotriphosphazenes with nongeminal methyl and phenyl substituents

The reactions of Me(3)SiN=P(OR")RR'(R" = Ph, CH(2)CF(3); R, R' = Me, Ph) with alcohols were investigated. With nonequivalent amounts of CF(3)CH(2)OH, the reactions produced high yields of the cyclic phosphazene (Me(2)PN)(3) and both the cis and trans isomers of nongeminally substituted [(Ph)(Me)PN](3). The isomers of this new cyclic phosphazene were separated by column chromatography and characterized by NMR and IR spectroscopy, elemental analysis, and X-ray crystallography. Crystals of the cis isomer 6a have a monoclinic crystal system, while the trans isomer 6b has a triclinic crystal system with two different molecules in an asymmetric unit. The bond lengths and bond angles are very similar to those of the simpler cyclic trimers (Me(2)PN)(3) and (Ph(2)PN)(3.) A likely pathway for the formation of these compounds is discussed.     

A vibrationally compensated far infrared laser interferometer for plasma density measurements

A modulated far-infrared laser interferometer which is presently operating on the PDX experiment at Princeton is described. The interferometer geometry permits the characterization of inside D, outside D as well as circular discharges. To achieve this versatility, a titanium corner cube reflector, mounted inside the PDX vacuum vessel is used in conjunction with a second visible wavelength interferometer for vibration corrections. In addition, the use of room temperature quasi-optical Schottky diodes in the far-infrared interferometer is reported. The minimum detectable line average density of the system is 5×10¹¹ cm^–3.     

Adsorption of aspartic acid on kaolinite

The interaction of aspartic acid with kaolinite was studied by potentiometric titrations and by adsorption measurements both at constant aspartate concentration (but varying pH) and at a constant pH of 5.5. The temperature was 25 degrees C, and the ionic medium 5 mM KNO3. Aspartic acid dissociation constants estimated from titrations agreed with those from the literature. The adsorption of aspartic acid to kaolinite was weak and varied only slightly with pH; 10-18% of 100 microM aspartic acid adsorbed to kaolinite at 100 m(2)L(-1) between pH 3 and 10. Data from the titrations and adsorption experiments were fitted closely by an extended constant-capacitance surface complexation model, in which monodentate outer-sphere complexes formed between deprotonated aspartic acid molecules and protonated sites on the variable-charge edges of the kaolinite crystals. There appeared to be no adsorption to the permanently charged crystal faces.     

Alginic acid–silica hydrogel coatings for the protection of osmotic distillation membranes against wet-out by surface-active agents

The formulation of organic–inorganic polymer composites can be used to enhance selected properties, such as susceptibility to microbial attack, thermal stability, mechanical strength and water sorption capability. Accordingly, a series of alginic acid–silica hydrogel films was prepared for testing as protective coating materials for PTFE osmotic distillation membranes. Unprotected hydrophobic membranes are subject to wet-out when contacted by surface-active agents, such as oils and detergents. Films containing 5, 10, 15 and 20 wt.% silica, with and without the addition of glycerol for plasticisation, moisturisation and silica dispersion, were characterised using scanning electron microscopy, X-ray diffraction, differential scanning calorimetry, mechanical strength measurements, and water-swelling measurements. Composites prepared with glycerol addition had better thermal stability, mechanical strength and water sorption capability than those prepared without glycerol addition. Uncoated membranes and membranes coated with composites prepared with glycerol addition were tested for OD performance and resistance to surface-active agents using pure water, orange oil (limonene)–water mixtures, and sodium dodecylbenzene sulfonate detergent solutions. Uncoated membranes showed immediate hydrophobicity loss in the presence of orange oil and detergent. For coated membranes, no wet-out occurred over the 15 h duration of three consecutive 5 h OD trials using orange oil–water mixtures. In the case of detergent solutions, the coating afforded protection to the membrane for 4–5 h. In a separate trial, no wet-out occurred when the coated side of the membrane was placed in contact with 1.2 wt.% orange oil for 72 h.     

Beyond the Roger Brown rearrangement: long-range atom topomerization in conjugated polyynes

Long-range carbon atom topomerization in a 1,3-diyne has been demonstrated for the first time. 1-Phenyl-4-p-tolyl-1,3-butadiyne, (13)C-enriched at C-1, was synthesized and subjected to flash vacuum pyrolysis. At 800 degrees C and 0.01 Torr, this resulted in nearly complete (13)C label equilibration between C-1 and C-2, as seen by NMR analysis. Pyrolysis at 900 degrees C further led to ca. 35% of the label migrating about equally to C-3 and C-4. These results demonstrate that both intrabond and interbond atom exchange processes are operative, with the former having a lower activation barrier. DFT and Moller-Plesset calculations support a mechanism that passes through Brown rearrangement (1,2-shift), closure to trialene (bicyclo[1.1.0]-1,3-butadiene), bond-shift isomerization to exchange C-2 and C-3, and ring opening. The resulting vinylidene can rearrange to a butadiyne with the isotopic label at C-3 or C-4. Consistent with earlier calculations, trialene is predicted to have alternating peripheral bonds, with a weak central sigma bond and significant diradical character. Trialene is predicted [(B3LYP/6-311+G(2d,p)] to lie 64.6 kcal/mol above butadiyne, with barriers of 2.2 and 4.4 kcal/mol, respectively, for ring opening or bond-shift isomerization. Other potential rearrangement mechanisms which pass through tetrahedrene (E(rel) = 167.2 kcal/mol) or 1,2,3-cyclobutatriene (E(rel) = 161.1 kcal/mol) lie at much higher energies.     

Adsorption of organic matter at mineral/water interfaces. 6. Effect of inner-sphere versus outer-sphere adsorption on colloidal stability

The effects of the adsorption modes of several low molecular weight (LMW) organic anions (maleate, oxalate, and citrate) on the colloidal stability of corundum-water suspensions have been examined using electrokinetic and shear yield stress (tau(y)) measurements over a broad range of pH conditions and LMW organic anion concentrations. Consistent with previous studies, increasing concentrations of maleate, oxalate, and citrate progressively shift the electrokinetic isoelectric point and pH of the maximum shear yield stress (tau(y,max)) to more acidic conditions. Due to its predominant electrostatic driving force for adsorption, outer-spherically adsorbed maleate possesses a very limited ability to charge reverse the corundum-water interface or bind to the negatively charged corundum surface. By contrast, inner-spherically adsorbed oxalate and citrate can significantly charge reverse the corundum-water interface, with the extent of charge reversal being related to the relative binding strengths of the oxalate and citrate anions. Adsorbed maleate, oxalate, and citrate generate steric barriers to interparticle approach, leading to substantial reductions in the magnitude of tau(y,max) at low to intermediate concentrations of those LMW anions. At the highest anion concentrations investigated, however, increases in tau(y,max) are observed, and can be attributed to the formation of bridging Al(III)-organic surface precipitates, as suggested by in situ attenuated total reflectance Fourier transform infrared spectroscopic measurements of corundum-oxalate suspensions at high oxalate concentrations. The extent of precipitate formation is greatest for the corundum-oxalate system due to the strong dissolution-enhancing properties of the inner-spherically adsorbed oxalate anion (i.e., its ability to generate enhanced concentrations of dissolved Al(III) which can then participate in precipitate formation). The effects of the LMW organic anion adsorption modes on both the forms of the measured tau(y) versus pH data, and the ability to quantitatively compare tau(y) and zeta potential data measured at different corundum concentrations, are also discussed.